R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 02-02-2006, 05:55 PM   #17221
Tech Fanatic
 
crimson eagle's Avatar
 
Join Date: Jun 2003
Location: Nor Cal
Posts: 841
Send a message via ICQ to crimson eagle
Default

Quote:
Originally Posted by Ntensweapon
WHAT THE....
is that uncoated solid copper wire? how do you put your cells in the car? or is that an optical illusion
clear heat shrink and the solid copper is 8 awg. The cells fit right over the top.
crimson eagle is offline   Reply With Quote
Old 02-02-2006, 07:39 PM   #17222
Tech Master
 
burgboyz's Avatar
 
Join Date: Jan 2005
Location: Da 'Burg
Posts: 1,247
Trader Rating: 70 (100%+)
Default

Quote:
Originally Posted by theisgroup
not me. i was kind of against the solid wire

my mistake, i couldn't remember who it was exactly.

thanks for the update crimson. i love all of the "low cg" wiring photos on this thread. i have learned alot from all of you fellas!!
__________________
Got Droop???
Speed Passion....Speed Power....Serpent America/Desoto Racing.
burgboyz is offline   Reply With Quote
Old 02-02-2006, 07:39 PM   #17223
Tech Regular
 
Ntensweapon's Avatar
 
Join Date: Dec 2002
Location: iowizza
Posts: 269
Trader Rating: 1 (100%+)
Default

okay???
i don't see the point. electricity flows on the outer core of the conducter. stranded wire serves more purpose than being flexible. mirco stranded wires give the best flow in dc application. ie locomotive cable and welding cables.
Ntensweapon is offline   Reply With Quote
Old 02-02-2006, 07:52 PM   #17224
Tech Elite
 
theisgroup's Avatar
 
Join Date: Apr 2002
Posts: 3,191
Trader Rating: 10 (100%+)
Default

Quote:
Originally Posted by Ntensweapon
okay???
i don't see the point. electricity flows on the outer core of the conducter. stranded wire serves more purpose than being flexible. mirco stranded wires give the best flow in dc application. ie locomotive cable and welding cables.
dude, don't go there. we had this discussion pages back. basically there are 2 camps to this theory. One believes that electricity flows on the surface. the other camp believes that in dc application electricity flows through the entire cross sectional area of the wire.
__________________
yang lai

Team Tamale | Team Tekin | RCAmerica | Speedmerchant | Speedzone RC | EA Motorsports | Ko Propo USA | eXpress Motorsports | Parma/PSE
theisgroup is offline   Reply With Quote
Old 02-02-2006, 08:04 PM   #17225
Tech Fanatic
 
crimson eagle's Avatar
 
Join Date: Jun 2003
Location: Nor Cal
Posts: 841
Send a message via ICQ to crimson eagle
Default

Quote:
Originally Posted by Ntensweapon
okay???
i don't see the point. electricity flows on the outer core of the conducter. stranded wire serves more purpose than being flexible. mirco stranded wires give the best flow in dc application. ie locomotive cable and welding cables.
Tens,

Actually before I did this I thought the same way. However I did some research and the skin effect only applies to AC and not DC. Check out the link.

http://www.allaboutcircuits.com/vol_2/chpt_3/6.html

If the skin effect was in play a tube would be better than flexible cable as when the individual wires run in and out of the bundle the current will constantly want to jump to the strands on the outside.

Chris
crimson eagle is offline   Reply With Quote
Old 02-02-2006, 08:05 PM   #17226
Tech Fanatic
 
crimson eagle's Avatar
 
Join Date: Jun 2003
Location: Nor Cal
Posts: 841
Send a message via ICQ to crimson eagle
Default

Quote:
Originally Posted by theisgroup
dude, don't go there. we had this discussion pages back. basically there are 2 camps to this theory. One believes that electricity flows on the surface. the other camp believes that in dc application electricity flows through the entire cross sectional area of the wire.

Thanks Thiesgroup, I shouldn't get caught up in other conversations in the middle of a post.

Chris
crimson eagle is offline   Reply With Quote
Old 02-02-2006, 08:14 PM   #17227
TFR
Tech Master
 
TFR's Avatar
 
Join Date: Aug 2001
Location: Toronto
Posts: 1,767
Trader Rating: 11 (100%+)
Default

Anybody know what brand these purple ball studs are? I'm trying to replace all the blue parts with purple. Thanks.
Attached Thumbnails
1/12 forum-.jpg  
__________________
Muchmore l AHRP l Xenon l Futaba
TFR is offline   Reply With Quote
Old 02-02-2006, 08:51 PM   #17228
Tech Master
 
dakrat's Avatar
 
Join Date: Nov 2004
Location: 96th ABW
Posts: 1,581
Default

Quote:
Originally Posted by TFR
Anybody know what brand these purple ball studs are? I'm trying to replace all the blue parts with purple. Thanks.
looks like its custom anodized
dakrat is offline   Reply With Quote
Old 02-02-2006, 09:29 PM   #17229
Tech Master
 
busman's Avatar
 
Join Date: Feb 2003
Location: Enumclaw, Washington
Posts: 1,434
Default

Quote:
Originally Posted by TFR
Anybody know what brand these purple ball studs are? I'm trying to replace all the blue parts with purple. Thanks.
go looking on the HPI rack, they look like HPI shock,rod ends, and shock stud balls
__________________
But, Is it farther to Seattle or by Bus??????
Be obsequious as opposed to obtuse
The more Government expands, The more Freedom contracts!!
busman is offline   Reply With Quote
Old 02-02-2006, 09:36 PM   #17230
Tech Master
 
Scrad's Avatar
 
Join Date: Feb 2003
Location: Plover, WI
Posts: 1,508
Trader Rating: 15 (100%+)
Default

What brand of shock is that?
Scrad is offline   Reply With Quote
Old 02-02-2006, 09:56 PM   #17231
Tech Elite
 
trackdesigner71's Avatar
 
Join Date: Sep 2002
Location: Lynchburg/Portsmouth, VA
Posts: 4,978
Trader Rating: 4 (100%+)
Send a message via AIM to trackdesigner71 Send a message via Yahoo to trackdesigner71
Default

I just closed a deal for a 12L3. I know its not the latest thing but can anybody tell me about setups or what not for it?
trackdesigner71 is offline   Reply With Quote
Old 02-02-2006, 10:56 PM   #17232
Tech Master
 
Scott S's Avatar
 
Join Date: Oct 2004
Location: New York
Posts: 1,314
Trader Rating: 30 (100%+)
Default

Quote:
Originally Posted by TFR
Anybody know what brand these purple ball studs are? I'm trying to replace all the blue parts with purple. Thanks.
Hotbodies / HPI.
__________________
Xray T2 007 | Xray T2 | CRC 3.2R | CRC Gen X
Willis Hobbies | 360 RC Speedway & Hobbies | LIR
Scott S is offline   Reply With Quote
Old 02-02-2006, 11:10 PM   #17233
Tech Adept
 
Eddie M's Avatar
 
Join Date: Feb 2002
Location: Canada
Posts: 205
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by trackdesigner71
I just closed a deal for a 12L3. I know its not the latest thing but can anybody tell me about setups or what not for it?

Just go to Associated site and look for a team driver setup.
Eddie M is offline   Reply With Quote
Old 02-02-2006, 11:24 PM   #17234
Tech Fanatic
 
Join Date: Apr 2004
Location: SF Bay Area
Posts: 814
Default

Quote:
Originally Posted by TFR
Anybody know what brand these purple ball studs are? I'm trying to replace all the blue parts with purple. Thanks.
Trinity used to sell purple ball studs, nuts and screws. Back when Joel Johnson use to work for Ernie.
Crashby is offline   Reply With Quote
Old 02-03-2006, 11:49 AM   #17235
Tech Elite
 
CypressMidWest's Avatar
 
Join Date: May 2003
Location: Central Ohio
Posts: 4,603
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by busman
go looking on the HPI rack, they look like HPI shock,rod ends, and shock stud balls
Exactly, it's all straight up HPI.
__________________
Team CRC, Access Race Place, US Indoor Champs, CD SUPERPRO, RK Designs, Cypress, Founder and lead instructor of the Ian Ruggles Negative Reinforcement Driver Training Program, enroll now.....
CypressMidWest is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 7 (2 members and 5 guests)
Mach10_shooter, TOADYY
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 09:36 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0