R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 12-17-2005, 12:08 AM   #16291
Tech Elite
 
nashrcracer's Avatar
R/C Tech Charter Subscriber
 
Join Date: Nov 2001
Location: LA - Lower Antioch
Posts: 4,849
Trader Rating: 1 (100%+)
Default

well I didn't go looking in previous posts so flame me accordingly.

But if you had a choice of anything else other then paragon ground effects what would you use and does it fade at 6 minutes unlike gournd effects. I have tried tq 8 and it's gone out of the tires at 6 minutes. jack the slipper is gone about the same. what's the general consesus? niftech? most of these seem to be geared towards TC and not 12th scale. and the dry out stage seems to be around 6 minutes. also running mod 12 makes it even more important. any ideas?
__________________
RC50 As you come into this world, something else is also born. You begin your life, and it begins a journey towards you. It moves slowly, but it never stops. Wherever you go, whatever path you take, it will follow never faster, never slower, always coming. You will run, it will walk. You will rest, it will not. One day, you will linger in the same place too long you will sit too still, or sleep too deep. And when, too late, you rise to go, you will notice a second shadow next to yours. Your life will then be over.
nashrcracer is offline   Reply With Quote
Old 12-17-2005, 01:39 AM   #16292
Tech Champion
 
JayBee's Avatar
 
Join Date: Mar 2004
Location: 12TH-MAN COUNTRY
Posts: 6,803
Trader Rating: 31 (100%+)
Default

The Yoke was pretty darn good last night except for the broken T-bar in the Main (was in fighting position for the win ) But now I want to use the Silva Concepts (Medium) Spring Steel T-bar I have. Anyone recommend this? Or should I steer clear of it? Is the medium like the .063"?
__________________
R C 3 G R A F I X _ F U S I O N . G R A P H I X _ S E A T T L E - R/C - R A C E R S _ E M E R A L D C I T Y R C . C O M

A E - 12R5.2 _ S M - REV8 PRO
JayBee is offline   Reply With Quote
Old 12-17-2005, 02:46 AM   #16293
Tech Master
 
BrainTeased's Avatar
 
Join Date: Jan 2004
Location: Melbourne
Posts: 1,342
Trader Rating: 4 (100%+)
Default

Quote:
Originally Posted by Pro ten Holland
The good old L3 should work well, and should be easy to come by used.
Actually, I think any car should be able to work on asphalt. It's mostly a matter of subtle setup tweaks. A less stiff car just masks small setup imperfections better.
thanks holland your pretty right on that but i have no expreience with 12th so to get a good setup i will need alot of time and money because of the foam tyres ! so i want something i know is really good.

what about CRC cars guys? whats the best CRC model for outdoor ashpalt tracks with low traction? as i have a local importer that messaged me that he will be importing CRC's next week!
__________________
www.feralbatteries.com.au
BrainTeased is offline   Reply With Quote
Old 12-17-2005, 03:46 AM   #16294
Tech Apprentice
 
Join Date: Feb 2005
Location: Fremont, Ca.
Posts: 78
Default

I just got into 12th scale, and I'am finding out that is all about set-up. Now I'am a newbe to this class so correct me if I'am wrong. I think most all the cars can be tuned to any track to a point, and then if you can drive and feel the difference (I can't or dont know) some cars are better for carpet or paved (i.e. thin chassie flex or thick chassie stiff). So it depends on what your racing on, But I'am having fun and if you raced another class before the leaening curve is steep or at least I feel that way.
Grub_Maker is offline   Reply With Quote
Old 12-17-2005, 07:11 AM   #16295
Tech Regular
 
Join Date: May 2005
Posts: 338
Default

touring car is a piece of cake compared to 12th scale - that's a real carpet car!!!!!!!!! and the Rev4 is at the top of the pile!
DLM2005 is offline   Reply With Quote
Old 12-17-2005, 08:34 AM   #16296
Tech Master
 
busman's Avatar
 
Join Date: Feb 2003
Location: Enumclaw, Washington
Posts: 1,434
Default

Quote:
Originally Posted by JayBee
The Yoke was pretty darn good last night except for the broken T-bar in the Main (was in fighting position for the win ) But now I want to use the Silva Concepts (Medium) Spring Steel T-bar I have. Anyone recommend this? Or should I steer clear of it? Is the medium like the .063"?
cept thought you were gonna have a stroke last night, till you stopped listening to mark "wisdumb", I won't be running 2 cars on friday anymore, won't be anymore of JB running in front of me

You looked pretty good in the main, next time just punt Kimchee.
__________________
But, Is it farther to Seattle or by Bus??????
Be obsequious as opposed to obtuse
The more Government expands, The more Freedom contracts!!
busman is offline   Reply With Quote
Old 12-17-2005, 11:25 AM   #16297
Tech Champion
 
JayBee's Avatar
 
Join Date: Mar 2004
Location: 12TH-MAN COUNTRY
Posts: 6,803
Trader Rating: 31 (100%+)
Default

...I wanna take Kimchee fair-n-square. Maybe next time But remember, Kimchee pulled a Mark and was only running a half-charged pack in the Main
__________________
R C 3 G R A F I X _ F U S I O N . G R A P H I X _ S E A T T L E - R/C - R A C E R S _ E M E R A L D C I T Y R C . C O M

A E - 12R5.2 _ S M - REV8 PRO
JayBee is offline   Reply With Quote
Old 12-17-2005, 11:26 AM   #16298
Tech Champion
 
Korey Harbke's Avatar
 
Join Date: Oct 2002
Location: Redmond, WA
Posts: 6,053
Trader Rating: 13 (100%+)
Default

Wait..... whos Kimchee?
__________________
Pro Spec America/Apex RC - Team ORCA - Awesomatix USA - Roche RC USA - AVID - Sweep - Protoform - Pro-One RC - Slapmaster Tools - Hebiki Design Works - Turtlemaster Racing - Seattle RC Racers - Timezone Hobbies
Korey Harbke is offline   Reply With Quote
Old 12-17-2005, 11:29 AM   #16299
Tech Champion
 
JayBee's Avatar
 
Join Date: Mar 2004
Location: 12TH-MAN COUNTRY
Posts: 6,803
Trader Rating: 31 (100%+)
Default

Turtlemaster
__________________
R C 3 G R A F I X _ F U S I O N . G R A P H I X _ S E A T T L E - R/C - R A C E R S _ E M E R A L D C I T Y R C . C O M

A E - 12R5.2 _ S M - REV8 PRO
JayBee is offline   Reply With Quote
Old 12-17-2005, 02:06 PM   #16300
Tech Champion
 
Korey Harbke's Avatar
 
Join Date: Oct 2002
Location: Redmond, WA
Posts: 6,053
Trader Rating: 13 (100%+)
Default

ok.... you'll have to tell me the reasoning behind that one of these days. Naming him after korean food..... hmmmmm.....
__________________
Pro Spec America/Apex RC - Team ORCA - Awesomatix USA - Roche RC USA - AVID - Sweep - Protoform - Pro-One RC - Slapmaster Tools - Hebiki Design Works - Turtlemaster Racing - Seattle RC Racers - Timezone Hobbies
Korey Harbke is offline   Reply With Quote
Old 12-17-2005, 03:30 PM   #16301
Tech Adept
 
Join Date: Aug 2005
Posts: 117
Default A growing set of 1/12th technical guides

Hi all

http://markpayneblog.blogspot.com/

In the above I am taking some time to document the lessons I have learnt since picking up 1/12th scale in the 2004/2005 season in the UK.

I welcome comments. I am tring to build a set of detailed guides with photos etc that will be helpfull to people, especially running the CRC Carpet Knife 3.2R.

So take a look and let me know what you think. I have lozds more to share.. it just takes time to do stuff with this level of detail.

Cheers

Mark
Mark Payne is offline   Reply With Quote
Old 12-17-2005, 03:46 PM   #16302
Tech Elite
 
Join Date: May 2004
Location: Adelaide..
Posts: 3,414
Trader Rating: 8 (100%+)
Send a message via ICQ to v0rtex Send a message via AIM to v0rtex Send a message via MSN to v0rtex
Default

Fantastic guide
__________________
;)
v0rtex is offline   Reply With Quote
Old 12-17-2005, 07:24 PM   #16303
Tech Champion
 
JayBee's Avatar
 
Join Date: Mar 2004
Location: 12TH-MAN COUNTRY
Posts: 6,803
Trader Rating: 31 (100%+)
Default

Quote:
Originally Posted by Mark Payne
Hi all

http://markpayneblog.blogspot.com/

In the above I am taking some time to document the lessons I have learnt since picking up 1/12th scale in the 2004/2005 season in the UK.

I welcome comments. I am tring to build a set of detailed guides with photos etc that will be helpfull to people, especially running the CRC Carpet Knife 3.2R.

So take a look and let me know what you think. I have lozds more to share.. it just takes time to do stuff with this level of detail.

Cheers

Mark

Excellent read
__________________
R C 3 G R A F I X _ F U S I O N . G R A P H I X _ S E A T T L E - R/C - R A C E R S _ E M E R A L D C I T Y R C . C O M

A E - 12R5.2 _ S M - REV8 PRO
JayBee is offline   Reply With Quote
Old 12-17-2005, 11:00 PM   #16304
Tech Champion
 
Still Bill's Avatar
 
Join Date: Jan 2004
Location: Reno, NV
Posts: 7,016
Trader Rating: 11 (100%+)
Default

Nice post Mark.
__________________
Constantly evolving CRC WGT and WGT-R/T...Carpet & Asphalt...All thanks to Team CRC.
Still Bill is offline   Reply With Quote
Old 12-17-2005, 11:07 PM   #16305
Tech Elite
 
Join Date: Feb 2005
Location: auburn washington
Posts: 2,054
Default

Quote:
Originally Posted by Sushi Boy
ok.... you'll have to tell me the reasoning behind that one of these days. Naming him after korean food..... hmmmmm.....
according to the "cherry" turtles eat kimchee and get miss tempered thus the kimchee nick name, think it actually made one of the magazines covering the 2004 nats in portland.
Turtlemaster is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 05:28 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0