R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

    Hide Wikipost
Old 10-28-2016, 12:43 PM   -   Wikipost
R/C Tech Forums Thread Wiki: 1/12 forum
Please read: This is a community-maintained wiki post containing the most important information from this thread. You may edit the Wiki once you have been a member for 90 days and have made 90 posts.
 
Last edit by: fenton06
This is a place to share knowledge related to 1/12th scale racing. It is not to be used for conversations.

KITS:
Click links to go to manufacturer product page. If any are missing please add them!

TIRES:
Pre-mounted tires readily available in the US:
Pre-mounted tires readily available in the Europe:
  • Hot Race ??

Gluing your own donuts:
https://www.youtube.com/watch?v=hm7z1rz-74s - Special thanks to Edward Pickering!
Truing tires:
https://www.youtube.com/watch?v=8wqHOLWq6Uc - Special thanks to Edward Pickering!

The following information came from HERE, with some editing and information added. Thanks Christian!

THIS MAY NEED UPDATING FOR THE NEW BLACK CRC CARPET

Brands:
BSR, CRC, Jaco:
Pro One is no longer selling to the public, but it and the brands above are all mounted by BSR and use the same foam. The nomenclature of the BSR vs Jaco/CRC is a little different in a few instances but is otherwise the same. The BSR foam consists of three families, and can be identifed as synthetics, naturals, and blends.

Synthetics - The old school, light weight, easy to true "dry feeling" tires. These include tires like CRC/Jaco Yellow (BSR White), Black, Gray, etc. These tires offer the highest wear rate and lowest grip. Many racers continue to use these nder high bite conditions.

Naturals - These tires are usually the best alternative for low bite and asphalt. They include Pink, Magenta, Double Pink, Lilac (BSR Team Purple), Purple, and other tires. These tires provide a ton of grip, but tend to get sticky in high bite conditions. This rubber does not wear as easily, and the cars will pick up gunk and fibers from the carpet under most high bite conditions. This is especially bad if the humidity is high.

Blends - These are the tires most people run today. They were initially called "JFT foam" by some, as it was believed that the tires were the same as the JFT tires. We can divide the blends further into two groups: high rubber and low rubber content. The high rubber would be the new rear Orange and Red from the BSR family, and the low rubber would be the Green and Blue varieties. When, asked about the difference, John Foister from BSR Tires said they came from the same "family" of foam, but they offered different grip. According to John, the Green/Blue has more bite than Orange/Red, but from track testing Oranges offer more bite than Green (being equivalent to in hardness) when the grip is high and absolutely no grip when it is lower. The Orange foam has a denser pore structure and the tire is not as prone to chunking. It is also important to note is that BSR Blue rears are not the same as the BSR Blue fronts!

JFT:
JFT stands for Japan Foam Tire. They started the new wave of foam tires we are all using now (Blue/Blu, Green/Greene, Dbl Blue, etc). These tires are a little different than the BSR tire family, but work in very similar conditions. They offers four varieties A (asphalt), C (carpet), S (???), and R (???). This does not mean that those types only work on that surface, but this is what they recommend.

JFT uses the same foam for fronts and rears if the color is the same.

A: Used on asphalt, considered close to the natural rubber variety and are named consistently with other natural tires.
C: Used on carpet, considered a blend.
S: Used on carpet?, tires are ???
R: Used on carpet?, tires are ???

For setup, the JFT foam seem to generate more bite than the BSR, therefore the car tends to be a little more aggressive.

Ulti:
Ulti is another Japanese brand that offers an array of compounds. They have their own way of rating tires, and are difficult to equate to other brands. They have 4 different varieties, each in varying degrees of hardness.

J: High rubber content tire, similar to Pink/ Magenta. Soft would be close to a pink. These offer the most bite and are great for asphalt/carpet front tire. (J hard being very popular)
X: "Balanced" blend, similar to JFT Blue/ Green. Soft is equivalent to Green, medium to Blue in hardness. Great for carpet!
Y: High synthetic blend with lower grip, and is not a very popular variety.
Z: A very expensive "special" foam that is supposed to be magic on asphalt. Only make it in soft shore.
European tires:
There are many great European foam tire brands that use their own types of foam, as well as traditional foams. SOmeone with more knowledge about them will need to fill this in!

Tire Diameter:
If you are racing on carpet, you have to evaluate how much grip your track has. If your track is low to medium grip, you can run bigger tires. If you are on higher bite you have to cut them smaller, there is simply no way around it. Bigger tires are needed for asphalt, especially in the rear. The larger tires provide much needed lateral bite.

Carpet (mm):
Low - Medium Bite
Front: 42.0 - 42.5
Rear: 42.5 - 43.00
Medium - High Bite
Front: 40.5 - 41.0
Rear: 41.5 - 42.0
Big Race
Front: 39.5 - 40.0
Rear: 40.5 - 41.0
Asphalt (mm):
Parking Lot
Front: 43.0 - 44.0
Rear: 44.0 - 45.0
Prepped High Bite
Front: 42.0 - 43.0
Rear: 43.0 - 44.0

Tire Saucing:
Most facilities have moved towards odorless traction additives such as SXT. Some of additives evaporate very quickly and some do not. This seems to be something that is also dependent on tire compound and ambient temperature. For example, saucing a Green compound seems like it never dries, especially when tjhe temperature is lower. We have found that wiping the tires off 15 minutes before we go run allows the sauce to cure, which makes the car come in much quicker with Green rears. Blue compounds on the other hand, do fine when wiped off right before hitting the track.

Saucing half front and full rear is a good initial starting point. If the front of the car is too agressive you can sauce les than half, or for a shorter amount of time.
Tire Fuzzing:
In conditions of increasing grip, foam tires will somewtimes get sticky and pick up fuzz and debris from the track. This is highly dependent on the rubber sedan tire that is being run at your local track and the compound/ type of foam you are running on you car. The softer the sedan tire and the harder/higher rubber content in your foam tire, trouble with fuzzing seems more likely to occur.

There are ways to get around fuzzing under most conditions, and usually involves the selection of the correct foam compound. The more fuzz you get, the softer/lower rubber content you want to run.

Examples:
Problem: Car fuzzes with Lilac/Team Purple fronts and car starts pushing.
Solution: Use a softer front tire and or different family of foam. Replace it with Blue or Double Blue front.

Problem: Car loses rear bite 6 minutes into the run. Blue rear tires look almost clean but have small carpet hairs.
Solution: Use Green rear tires. The softer compound wears instead of getting sticky, minimizing fuzz.

Tire Selection:
Starting out, pick 2 tire compounds for the front and rear. The following should have you covered 99% of the time.

Front - Green and Blue (BSR) or Green and Light Blue (JFT)
Rear - Blue and Double Blue (BSR) or Blue and Dark Blue (JFT)

You may wonder about other compounds out there and if they might be better, trust me, they probably won't be. Even if there are other tires that can be as fast, the synthetic family wears out really fast and the high natural rubber will probably fuzz on you over an 8 minute run. The blends family seems to be the most versatile foam type available today. They last awhile, and sticking to them will make your process of tire selection simpler.
Tire Charts:
BSR/CRC/Jaco



Contact



Corally



JFT (Japan Foam Tire)



Ulti



Enneti (Xceed)



ELECTRONICS:
ESC:
As of now, ROAR is staying 1S (3.7V nominal; 4.2V fully charged) for 1/12. There are many 1S ESC's with a built in BEC so nothing else is required to power the receiver and servo.

If you don't want to lock yourself into a 1S specific ESC, you do have other options! It is possible to use your 2S ESC without a booster or receiver pack, and the ESC simply supplies the lower voltage. If that does not appeal to you, you will need to use an Rx pack or booster. The Rx pack and booster will both supply the receiver with a higher voltage than the 1S pack.

If you decide to use an Rx pack, MAKE SURE TO REMOVE THE RED WIRE FROM THE ESC PLUG THAT GOES INTO THE RECEIVER!!!

If you choose to use a voltage booster, it works exactly how it sounds. Instead of plugging the ESC into the receiver, it plugs into the booster, and the booster plug goes to the ESC, supplying the higher voltage.

1S ESC:
If there are any missing please add them!!

If anyone would like a need for a chart comparing the ESC's specs PM fenton06 and I'll get one made and put in here!
Voltage Boosters:
If there are any missing please add them!
Servos:
BODIES:
Black Art (CRC - US Dist):
  • Audi R8C - BA002 - .020 Thick



  • Black Market (Mohawk 12) - BA005 - .020



  • Lola B10 - BA006 - .020 thick
  • Toyota TS030 - BA008 - .020 thick

    Lola - black/red, TS030 - green/pink


PROTOForm:

Reflex Racing/RSD:

SUSPENSION ADJUSTMENTS:

Print Wikipost

Reply
 
Thread Tools Search this Thread
Old 12-03-2005, 03:07 PM   #15991
Tech Champion
 
JayBee's Avatar
 
Join Date: Mar 2004
Location: 12TH-MAN COUNTRY
Posts: 6,803
Trader Rating: 31 (100%+)
Default

Quote:
Originally Posted by ApexSpeed
Like swinging a heavy bat in the on-deck circle. Running a 19T in 12th scale helped my stock sedan driving considerably. I would say that's a definite YES.

Then again, once you run the 19T, you will hate the stock motor. I'm not going back to stock in my sedan after running the 19T motor.
Very true indeed
__________________
R C 3 G R A F I X _ F U S I O N . G R A P H I X _ S E A T T L E - R/C - R A C E R S _ E M E R A L D C I T Y R C . C O M

A E - 12R5.2 _ S M - REV8 PRO
JayBee is offline   Reply With Quote
Old 12-03-2005, 03:14 PM   #15992
Tech Champion
 
Korey Harbke's Avatar
 
Join Date: Oct 2002
Location: Redmond, WA
Posts: 6,053
Trader Rating: 13 (100%+)
Default

I never glue the sidewalls of my tires unless there is a stupid amount of traction. Sometimes I will just touch up the edge where the tire meets the rim, to make sure they dont pull from the rim under normal running conditions.

-Korey
__________________
Pro Spec America/Apex RC - Team ORCA - Awesomatix USA - Roche RC USA - AVID - Sweep - Protoform - Pro-One RC - Slapmaster Tools - Hebiki Design Works - Turtlemaster Racing - Seattle RC Racers - Timezone Hobbies
Korey Harbke is offline   Reply With Quote
Old 12-03-2005, 06:52 PM   #15993
Registered User
 
Join Date: Jun 2004
Location: ROAR HAD ME BANNED FROM RC TECH.
Posts: 2,025
Trader Rating: 2 (100%+)
Default

Quote:
Then again, once you run the 19T, you will hate the stock motor. I'm not going back to stock in my sedan after running the 19T motor.
I agree as well. I found it much easier to tune the car, make run time, and found it way more enjoyable to drive than running stock. I agree with the driving aspect as well .. once you get better driving something fast you'll drop down in speed with stock and have an easier time negotiating the track.
Desolas is offline   Reply With Quote
Old 12-03-2005, 07:16 PM   #15994
OVA
Tech Champion
 
OVA's Avatar
 
Join Date: Dec 2002
Location: WASHINGTON
Posts: 8,500
Trader Rating: 67 (100%+)
Default

Quote:
Originally Posted by JayBee
I ran 27t tonight; did pretty good too- won 2 out of 3 heats, then won the main (glad ritchie decided not to run ) First time out with the car too. I think my sedan's taking a lil' bit of a breather

Hey
good job JB
__________________
I have not failed. I've just found 10,000 ways that won't work
OVA is offline   Reply With Quote
Old 12-03-2005, 07:20 PM   #15995
OVA
Tech Champion
 
OVA's Avatar
 
Join Date: Dec 2002
Location: WASHINGTON
Posts: 8,500
Trader Rating: 67 (100%+)
Default

Quote:
Originally Posted by JayBee
Very true indeed
Yes you are going back to stock Okay beat me up
__________________
I have not failed. I've just found 10,000 ways that won't work
OVA is offline   Reply With Quote
Old 12-03-2005, 08:52 PM   #15996
Tech Champion
 
Still Bill's Avatar
 
Join Date: Jan 2004
Location: Reno, NV
Posts: 7,016
Trader Rating: 11 (100%+)
Default

Them boys, Crashby and OD were fast today at Stockton.

Their Rev 4s hauled...
__________________
Constantly evolving CRC WGT and WGT-R/T...Carpet & Asphalt...All thanks to Team CRC.
Still Bill is offline   Reply With Quote
Old 12-03-2005, 09:16 PM   #15997
Tech Regular
 
Z.Hallett's Avatar
 
Join Date: Nov 2005
Location: Reston, Virginia
Posts: 401
Send a message via AIM to Z.Hallett
Default

what parts would be good to stock up for a 12L4? thx
Z.Hallett is offline   Reply With Quote
Old 12-03-2005, 09:59 PM   #15998
Tech Champion
 
JayBee's Avatar
 
Join Date: Mar 2004
Location: 12TH-MAN COUNTRY
Posts: 6,803
Trader Rating: 31 (100%+)
Default

Quote:
Originally Posted by OVA
Hey
good job JB
Thanks buddy ...
__________________
R C 3 G R A F I X _ F U S I O N . G R A P H I X _ S E A T T L E - R/C - R A C E R S _ E M E R A L D C I T Y R C . C O M

A E - 12R5.2 _ S M - REV8 PRO
JayBee is offline   Reply With Quote
Old 12-03-2005, 10:00 PM   #15999
Tech Adept
 
Join Date: Dec 2003
Location: Brookville, Ohio
Posts: 238
Trader Rating: 16 (100%+)
Default

Shouldnt need much....T-bars and maybe a couple pair of IRS lowered Arms.
impson is offline   Reply With Quote
Old 12-03-2005, 10:03 PM   #16000
Tech Champion
 
Still Bill's Avatar
 
Join Date: Jan 2004
Location: Reno, NV
Posts: 7,016
Trader Rating: 11 (100%+)
Default

Quote:
Originally Posted by Z.Hallett
what parts would be good to stock up for a 12L4? thx
Is your car totally stock?
__________________
Constantly evolving CRC WGT and WGT-R/T...Carpet & Asphalt...All thanks to Team CRC.
Still Bill is offline   Reply With Quote
Old 12-03-2005, 10:04 PM   #16001
Tech Champion
 
JayBee's Avatar
 
Join Date: Mar 2004
Location: 12TH-MAN COUNTRY
Posts: 6,803
Trader Rating: 31 (100%+)
Default

So those IRS lowered arms have a lower profile on the deck? So I can get more than 4mm of ride height if I wanted? I'm just looking for something that I can shim to play with like 3-5mm of ride height...
__________________
R C 3 G R A F I X _ F U S I O N . G R A P H I X _ S E A T T L E - R/C - R A C E R S _ E M E R A L D C I T Y R C . C O M

A E - 12R5.2 _ S M - REV8 PRO
JayBee is offline   Reply With Quote
Old 12-03-2005, 10:07 PM   #16002
Tech Champion
 
Korey Harbke's Avatar
 
Join Date: Oct 2002
Location: Redmond, WA
Posts: 6,053
Trader Rating: 13 (100%+)
Default

Yup, thats exactly they will do. They allow you to get a high ride height with smaller tires, or whatever size you have currently. What tires were you using at SIR? Sounds like everyone running some crazy combo like red in the fornt and pink in the rear.

-Korey
__________________
Pro Spec America/Apex RC - Team ORCA - Awesomatix USA - Roche RC USA - AVID - Sweep - Protoform - Pro-One RC - Slapmaster Tools - Hebiki Design Works - Turtlemaster Racing - Seattle RC Racers - Timezone Hobbies
Korey Harbke is offline   Reply With Quote
Old 12-03-2005, 10:09 PM   #16003
Tech Champion
 
JayBee's Avatar
 
Join Date: Mar 2004
Location: 12TH-MAN COUNTRY
Posts: 6,803
Trader Rating: 31 (100%+)
Default

Quote:
Originally Posted by Sushi Boy
Yup, thats exactly they will do. They allow you to get a high ride height with smaller tires, or whatever size you have currently. What tires were you using at SIR? Sounds like everyone running some crazy combo like red in the fornt and pink in the rear.

-Korey
That's exactly what I was running last night and the car was right on the bloody edge. Loved it all the way too ...I gotta get some of those lowered arms ... Thanks Sushi
__________________
R C 3 G R A F I X _ F U S I O N . G R A P H I X _ S E A T T L E - R/C - R A C E R S _ E M E R A L D C I T Y R C . C O M

A E - 12R5.2 _ S M - REV8 PRO
JayBee is offline   Reply With Quote
Old 12-03-2005, 10:24 PM   #16004
Tech Fanatic
 
Join Date: Sep 2001
Location: Chico, Ca
Posts: 810
Trader Rating: 6 (100%+)
Default

Bill - you forgot the 1st and 2nd place cars of Chris & Myself both of which are Rev 4's. I got a horrible start in the main and was never able to make it back up. Chris had a good car in the main as well. You need to get yours done. See you Wed.
schurcr is offline   Reply With Quote
Old 12-03-2005, 11:43 PM   #16005
Tech Regular
 
rinkrat99's Avatar
 
Join Date: Sep 2003
Location: Colorado
Posts: 420
Send a message via AIM to rinkrat99
Default 12th scale setup boards

Hi all

I am looking to buy a setup board for 12th scale racing. I have seen both Hudy and Integy which use an adhesive label. I also am aware that Tamiya makes an aluminum version for 10th scale and Trinity makes an aluminum version.

What do you all reccomend for pancar? Specifically for measuring track width and adjustment of left vs right axle lengths.

Also, is the Niftech setup gauge p/n 3001-187 worth it?

Thanks
rinkrat99 is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to the forum mig rod Electric Off-Road 1 01-05-2008 05:23 PM
hi i need help and im new to the forum racer4 Rookie Zone 4 01-21-2007 02:37 PM
Why is this forum listed under the On Road Forum? sport10 Onroad Nitro Engine Zone 0 01-11-2007 08:06 AM
Forum Changes... futureal Wisconsin & Illinois Racing 3 10-28-2002 09:26 PM



Currently Active Users Viewing This Thread: 3 (2 members and 1 guests)
antlockyer, kiwiazbro
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 03:05 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0