Originally Posted by Pro ten Holland
yep they are good ones to run but sometimes hard to find at our local shops, so i also use orion sprint brushes for a 10x1 or 11x2 orion core touring motor (pre-V2)
springs. i use a mix of trinity silver, blue, or green springs
T-bar, the middle third screw is usually removed to increase rear traction, alignment shouldn't be a issue. however your t-bar is more prone to break from a hard hit/crash
brace across the t-bar mounted above the pivots? i don't run one doesn't seem to hinder/help. was told it was there to reduce chassis flex and prevent the shifting/tweak of the t-bar/pivot mount screws.