ajg

Will these battery pack work with a 10 turn mod motor. Or will they get ruined like three of my other ones? I'm a little tight on space, so I need 2/3a cells that can handle the power.

Thanks Alot

http://www2.towerhobbies.com/cgi-bin...?&I=LXGPD5&P=7

https://www.ssl-stormerhobbies.com/c...pl?pn=TRI20003

Kave

iTrader: (17)

to even try and get any kind of runtime out of anything other then a full size cell 3000+ is just stupid, sorry to say, find more space or dont run a 10x2, thats a motor made for real cells

True R/C Racing

you can get Cheap Cells off ww.zxracing.com $35 for some really Good Cells. that will stand a ten turn. These Wont last. maybe a Stock turn it will work.

Jon Kerr

iTrader: (17)

That motor draws way too many amps. I don't care if they're matched, pushed, zapped or what. 2/3 cells aren't designed to handle a 540 motor let alone a 10 turn 540 motor. It's just not gonig to happen.

Fire

you MAY get away by running 2 packs of these in paralle to share the amp draws of a 10turn, these cells are rated for 10-15A discharge and they will self distruct when the 10turn trying to get more than 30A out of them

ajg

Alright, Also I get quite a long run time (geared low, but still gets 40+ mph). Also sub-c cells CAN'T fit in my custom 1/18 monster truck. Also they work great with the p2k motor (which I think I might go back to, has loads of torque with it), So I 'll get another touring car and put the mod motor in it.

Thanks Guys.