Go Back  R/C Tech Forums > General Forums > Electric On-Road
Spur gear on Xray T3 EU >

Spur gear on Xray T3 EU

Spur gear on Xray T3 EU

Old 01-17-2010, 07:19 AM
  #1  
Tech Rookie
Thread Starter
 
Join Date: Dec 2009
Posts: 14
Default Spur gear on Xray T3 EU

What is the biggest Spur gear who fits on the Xray T3EU??
Im now sitting and ordering Spur and pinion gear, so I have to be sure it will fits. I have choose 114 P64 & 116 P64, do they fits on my T3, or will they be to big ????
dartvidar is offline  
Old 01-17-2010, 07:25 AM
  #2  
Tech Elite
iTrader: (38)
 
Join Date: Oct 2005
Location: St. Louis
Posts: 2,667
Trader Rating: 38 (100%+)
Default

What motor and what size of track are you going to be running on? I don't think you will need spurs that large if you are running brush-less. A 106 is the largest I have ran. As for pinions, that depends on motor, track size, and speed control. For the non timed advance speed controls like GTB you will need much larger pinions than say a Tekin Rs.
chensleyrc1 is offline  
Old 01-17-2010, 07:34 AM
  #3  
Tech Rookie
Thread Starter
 
Join Date: Dec 2009
Posts: 14
Default

Originally Posted by chensleyrc1
What motor and what size of track are you going to be running on? I don't think you will need spurs that large if you are running brush-less. A 106 is the largest I have ran. As for pinions, that depends on motor, track size, and speed control. For the non timed advance speed controls like GTB you will need much larger pinions than say a Tekin Rs.
I will use LRP V12 4.5T and LRP SXX TC spec, I will run little bit indoor and out door. In accordance to LRP I will need a FDR around 9.5 - 8.5
I did then calculate out of the charts, I can use 23/116 & 26/116 That will be 9.5 & 8.5. I have heard some one say it's good to use larger spur??
So what spur size it's recomended for modify and stock, I will use 4.5T on modify and 10.5T on stock???
dartvidar is offline  
Old 01-17-2010, 09:07 AM
  #4  
Tech Champion
iTrader: (12)
 
RC MARKET's Avatar
 
Join Date: Feb 2007
Location: HK
Posts: 6,279
Trader Rating: 12 (100%+)
Default

114T or 116T
RC MARKET is offline  
Old 01-18-2010, 06:07 AM
  #5  
Tech Elite
iTrader: (38)
 
Join Date: Oct 2005
Location: St. Louis
Posts: 2,667
Trader Rating: 38 (100%+)
Default

The larger spur will allow to adjust ratio at a finer rate, and it moves the motor a little more forward which takes a little weight off the rear axles, so in theory would give a bit more steering. For those ratios I'd recommend the 116.
chensleyrc1 is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.