=MisFitz= NuKe

alright cool, I am going to mess with that this weekend, weather permitting, and then I willl be up to par.

STLNLST

iTrader: (32)

I'm going to put mine on for testing on Friday and if I don't like it I'll take it off and go back to the 20 for Saturday. I hope I have enough 48P pinions though Come on gear adapter

koabich

The only complaint I have ever had with Schumacher cars is the fact the the screw heads are never flush with the bottom of the chassis. Seems like the chassis needs to be better countersunk.
I had the same problem with my Mi2. Just wondering if anyone else has experienced this.
I have decided to not run the Mi2 until the spur gear adapter and P-Bud chassis are available. I hope I do not have the same problem with the P-Dub chassis.
Otherwise it looks like a great car and I cannot wait to run it.

the shoe

i also had this problem whith flush screw heads on the chassis but it is easy to deepen them with a countersink bit ! I will also try a softer setting and see how that goes.

=MisFitz= NuKe

I only had one screw that had a problem, it did not stick out very much. I went and changed all of the screws to titanium anyways...

koabich

What size countersink are you guys using?
Thanks

itchynads

I have the same problem but only with the 10mm long M3 screws.

I think the heads on the 10mm long M3 screws are not as shallow as the rest of the screws which causes them to not sit flush with the lower chassis.

Try different sizes if possible such as 8mm and they might be more flush with the chassis.

Fred Perkins

iTrader: (264)

Guys I have had no problems at all. I even cleared my chassis!

the shoe

P Dub,Adrin
I'm not able to get parts for my MI2 here in Daytona. I was told that they are on back order. We are at the end of a 14 race series all i need is frount a-arms and caster blocks . Magnum hobbies are who i get parts from . What are the chances of getting them in for me??? Thanks, going wide in a highspeed chicane around slower trafic in a 12 car main !!!!!!!

=MisFitz= NuKe

lol, about the crash. How about going full speed into some guy standing on the straight. Let me mind you that this is an actual guy, I ran into his foot with my 9 turn, lol. Didn't break a thing.

koabich

Paul,
Any word on the P-Dub Chassis for the Mi2...like when they will be available?
Thanks
Joe

DOTMAN

iTrader: (5)

P-Dub said hopefully in the next two weeks

turbodog

iTrader: (3)

Hey Shoe, what about me!? lol We're expecting a small parts order for the Mi2 this afternoon. We'll get them out for you today. How things going in Daytona?

the shoe

Sorry Troy! Thats great .All is so so here .The car was funny last outting,be it radio adjustments, driver,new set up (from Paul) or new track lay out. All this made for very intresting driving.Qualified 2 and then riped the right front off ,ran the Mission last week to make points finished 3rd with rear right drive shaft missing! Race director made a last minute desission to run 12 cars in the main and did not give ample time for us to review the mains posted(we are now turn marshaling the heat BEFORE the one we are in!!!!!!)so we had to be on track when it was posted. When everyone turned on their cars we had problems . I turned to look over the sheet and when i turned back my car was on the other side of the track hitting pipes!!!!! Ran it any ways to a 3rd place finish in the worst run race i have ever been in.thanks again!

abarth

hello.

I just woundering where can I buy Mi2 online. TowerHobbies and stormer racing didn't have it on their list.
I can't wait anymore for release date in my country, I want Mi2 now!!

Thank you!
abarth