Schumacher Corner
10-04-2007, 03:14 PM
I ran the kit top deck but jimmy ran the stiff...no warmers no need ...as allways corally jack the gripper .....pic of the camber link
10-04-2007, 03:48 PM
Is there any chance to fill the Setup Pdf cos After that picture I'm kind of Lost
10-04-2007, 04:12 PM
??????
ok now u have 2 holes in the rear hub run the hole on the inside not the hole that is deeper in the wheel..now u get me?
10-05-2007, 02:52 AM
Just to ask,is there any way Schumacher came out a purple bulkhead,it going to look good!
10-05-2007, 04:31 AM
10-05-2007, 04:40 AM
10-05-2007, 05:58 AM
I've bought some cvd dogbones and they are silver not purple 
10-05-2007, 08:07 AM
I seen 1 that was all black it was killer
10-05-2007, 08:09 AM
ok, i fixed all of my mistakes on my previous setup and here is my complete Vegas setup...if you have any questions feel free to shoot me a PM....
10-05-2007, 09:19 AM
Tech Master
Theh "purple" car kind of looked ok for a start, but it really was too much!! better as they are now, and even better looking with the l/w bulkheads 
10-05-2007, 09:57 AM
10-05-2007, 10:35 AM
10-05-2007, 11:10 AM
Has anybody had any problems with the schumacher titanium inner hinge pins? I changed to them thinking that they would be stronger than the standard steel ones!!! on sunday last i got punted off by a back marker at the end of a straight right into the boards
after the race i got the car back and i feared that i had broken the front and rear wishbones, but the inner hinge pins had bent into a "S" shape
I suppose it's cheaper than replacing the CF wishbones
I had to dremmel them in half to get them out of the wishbones
after the race i got the car back and i feared that i had broken the front and rear wishbones, but the inner hinge pins had bent into a "S" shape I suppose it's cheaper than replacing the CF wishbones I had to dremmel them in half to get them out of the wishbones
10-05-2007, 11:21 AM
boo yaa
10-05-2007, 11:50 AM
Has anybody had any problems with the schumacher titanium inner hinge pins? I changed to them thinking that they would be stronger than the standard steel ones!!! on sunday last i got punted off by a back marker at the end of a straight right into the boards after the race i got the car back and i feared that i had broken the front and rear wishbones, but the inner hinge pins had bent into a "S" shape I suppose it's cheaper than replacing the CF wishbones I had to dremmel them in half to get them out of the wishbones
after the race i got the car back and i feared that i had broken the front and rear wishbones, but the inner hinge pins had bent into a "S" shape I suppose it's cheaper than replacing the CF wishbones I had to dremmel them in half to get them out of the wishbones
