Schumacher Corner
R/C Tech Elite Member
iTrader: (47)
Hello Randy good job with the tq and win ...I am looking at your ROAR Nats setup sheet u didn't list what track rod u used also did u use the alum rear hubs with the insert if so what 1 from the looks of it it would be 1.5deg..How do u feel this setup will work on low bite carpet 19t rubber..in the driver notes u run a 414 front drive pully can u tell me more about why..I also now see u used the med width/short steering plate i assume it is the 2nd plate but u didn't check it thanks for your help I will be running it soon and I want to know how to interpret the set-up sheets!
Tech Elite
iTrader: (74)
Tech Elite
iTrader: (74)
414
is it a tamiya 414 pulley
Tech Champion
iTrader: (17)
Yes it is. You can probably get it from SppedtechRC
Tech Master
iTrader: (5)
so can i over drive my one way one my ec? its the heavy duty version?
also im racing on aphsalt so would this much steering help or hinder my car.
just sounded like something fun to play with.
cheers
also im racing on aphsalt so would this much steering help or hinder my car.
just sounded like something fun to play with.
cheers
R/C Tech Elite Member
iTrader: (47)
Im sure you can make the pulley fit. It really just depends on the track, I havent used my 1-way yet as the spool gives me plenty of steering with the overdrive..
Tech Master
iTrader: (5)
do you find with spool and over drive you eat drive shafts?
just im not a good driver yet and have destroyed a spool (old types) and about 3 driveshafts so im always worried bout driveshafts
im onlyruniing stock
cheers
just im not a good driver yet and have destroyed a spool (old types) and about 3 driveshafts so im always worried bout driveshafts
im onlyruniing stock
cheers
Super Moderator
iTrader: (239)
i ran the overdrive in the front today( 35t tamiya) and it was pretty good!!
Tech Master
iTrader: (5)
is this it?
http://www.speedtechrc.com/store/ebp...nid=246&id=442
is there a cheaper way?
also did u use a diff one way or spool?
cheers
http://www.speedtechrc.com/store/ebp...nid=246&id=442
is there a cheaper way?
also did u use a diff one way or spool?
cheers
Super Moderator
iTrader: (239)
is this it?
http://www.speedtechrc.com/store/ebp...nid=246&id=442
is there a cheaper way?
also did u use a diff one way or spool?
cheers
http://www.speedtechrc.com/store/ebp...nid=246&id=442
is there a cheaper way?
also did u use a diff one way or spool?
cheers
http://www.speedtechrc.com/store/ebp...id=268&id=1667
Tech Master
iTrader: (5)
thanks marcos ill chase one up for a try.
Tech Champion
iTrader: (31)
Schumacher MI3's dominate today in three classes on our big outdoor track in preparation for the BIGGEST race up here in the Northwest- THE 2007 SUMMER SIZZLER!!
19T Sedan- Brett Sisley (Schuie wheel)
27T Sedan- Randy Taylor (Owner of High Velocity)
13.5 Brushless- Ritchie Reynolds (Schuie wheel)
I was mid-pack with a 5th place finish in the 13.5 A Main; my 19T car was good too but broke a front arm in the 3rd heat and didn't feel like fixin' it. Running 2 cars today was WAYY too much work! I don't have a snowballs' chance in hell keepin' up with 3 classes next week in the SIZZLER!
19T Sedan- Brett Sisley (Schuie wheel)
27T Sedan- Randy Taylor (Owner of High Velocity)
13.5 Brushless- Ritchie Reynolds (Schuie wheel)
I was mid-pack with a 5th place finish in the 13.5 A Main; my 19T car was good too but broke a front arm in the 3rd heat and didn't feel like fixin' it. Running 2 cars today was WAYY too much work! I don't have a snowballs' chance in hell keepin' up with 3 classes next week in the SIZZLER!
Tech Elite
iTrader: (101)
You can do it Jaybee. Is there triple A mains? Hey you'll only be up 9 Times. Don't forget to corner 9 times as well.
Steve
Steve
you gonna make it this year steve, we missed you last year.
Tech Champion
iTrader: (31)