Originally Posted by sf85

Also make sure you sand down the rear arms a little where they touch the tire when compressing the shocks. If you don't, the tire will do it for you It may not rub at all on carpet but on asphalt on those high speed sweepers it will rub.

Skip

Originally Posted by sf85

My first weekend out on the car I had the settings all messed up and was getting used to it. But the second weekend out it was much better

Also make sure you sand down the rear arms a little where they touch the tire when compressing the shocks. If you don't, the tire will do it for you It may not rub at all on carpet but on asphalt on those high speed sweepers it will rub.

Another thing I had a tough time with was the rear arms binding up but all I had to do is sand down one of the Qwik Clips just a tad and it freed it up perfectly. Other than that the kit went together great

Skip

Originally Posted by Jon Kerr

He was asking about the EC, not the Mi3. You're right about slowly doing the ones for the Mi3 to make sure everything is pivoted properly and not binding.

Originally Posted by Marcos.J

Hey Skip all we need now is for Dave M to get one too

Originally Posted by Tim Kowal

I trim (round)the inside of the back of the wheel with a deburring tool, Had to do this with the xray, this may or may not be the same on the MI3. But I will make sure to check, thanks!

Originally Posted by TheCoolCanFanMan

Hi Guys
Just to let you know that that Mi3 Cool Can Fan is now avalible on www.coolcanfan.com as from Friday.
Cheers Malc TCCFM

Originally Posted by jimmy..maddison

Hi Guys

i thought i would take this time to introduce my self now i have joined the team,

im still learning alot about the car myself, but if there is anything i can help with please dont hesitate to ask,

thanks jimmy maddison

Originally Posted by jimmy..maddison

Hi Guys

i thought i would take this time to introduce my self now i have joined the team,

im still learning alot about the car myself, but if there is anything i can help with please dont hesitate to ask,

thanks jimmy maddison

Originally Posted by jimmy..maddison

Hi Guys

i thought i would take this time to introduce my self now i have joined the team,

im still learning alot about the car myself, but if there is anything i can help with please dont hesitate to ask,

thanks jimmy maddison

Originally Posted by CountryHick

Just finished building it. Does anyone know what ABEC rating the kit bearings are?

Originally Posted by CountryHick

Just finished building it. Does anyone know what ABEC rating the kit bearings are?