Team Checkpoint Brushless Motors
#1
Team Checkpoint Brushless Motors
Anyone know why these still aren't out?
#3
motor
check with Superior Hobbies they have them. well i seen 13.5 not sure what else.
#4
About this 13.5, could somebody tell me how much KV ratings and Power(W) is it, please?
#5
Tech Champion
iTrader: (208)
That looks similar to this one
http://www3.towerhobbies.com/cgi-bin...&I=LXWTV8&P=SM
I saw these at a hobby shop and was not to impressed with the design or the look of the unit. Seemed to be cheaply made but I have not seen one run on the track, it may be good.
http://www3.towerhobbies.com/cgi-bin...&I=LXWTV8&P=SM
I saw these at a hobby shop and was not to impressed with the design or the look of the unit. Seemed to be cheaply made but I have not seen one run on the track, it may be good.
#6
That looks similar to this one
http://www3.towerhobbies.com/cgi-bin...&I=LXWTV8&P=SM
I saw these at a hobby shop and was not to impressed with the design or the look of the unit. Seemed to be cheaply made but I have not seen one run on the track, it may be good.
http://www3.towerhobbies.com/cgi-bin...&I=LXWTV8&P=SM
I saw these at a hobby shop and was not to impressed with the design or the look of the unit. Seemed to be cheaply made but I have not seen one run on the track, it may be good.
Ohh well. It almost looks like the brushless version of a silver/black can motor. Looks like a cheap spec motor lol. IMO
#8
That's true! I guess that's possible. It doesn't say anywhere in the ad it's half plastic, it says aluminum can. Hmmmm.
Can anyone confirm?
Can anyone confirm?
#10
Tech Fanatic
Hi there,
I will try to answer any questions that people have on here about the motors.
I can tell you that these motors are great. We have done much testing and have found them to be very good, from the 3.5 all the way to the 21.5, we got them all.
I will check back day by day to see what I can help with.
Barry
I will try to answer any questions that people have on here about the motors.
I can tell you that these motors are great. We have done much testing and have found them to be very good, from the 3.5 all the way to the 21.5, we got them all.
I will check back day by day to see what I can help with.
Barry
#12
anybody have any idea on gearing for the 17.5 and 13.5 on carpet with about 100 ft straight, tekin rs speedo settings with vegas 200, not looking for an exact but a ballpark to get me started in the right direction???
#13
Tech Fanatic
17.5......Start around 5.25 and go from there.
13.5......I would start about 6.5
Both motors advance timing...1 line up from center...
Make sure to temp the motors...with a fan you can run them upto around 150-160....without a fan I wouldnt get them hotter the 175-180...thats for 13.5....17.5 should stay much cooler.
Hope that helps,
Barry
13.5......I would start about 6.5
Both motors advance timing...1 line up from center...
Make sure to temp the motors...with a fan you can run them upto around 150-160....without a fan I wouldnt get them hotter the 175-180...thats for 13.5....17.5 should stay much cooler.
Hope that helps,
Barry