Tommy Bergfeldt

I just got me four of these, works like a charm!
http://rc-mushroom.com/product_info....ducts_id=14555

pug 205 gti

This digital tweak station looks the business.Cant find anyone who stocks them though so i havent a clue what they cost?

http://www.redrc.net/2007/05/cs-elec...ard/#more-3248

pug 205 gti

Picture this on your pit table .but dont dare look at the price. lol

STLNLST

iTrader: (32)

Look at the car on the table (Schumacher) and CS is one of the lines they distribute so my guess would be contacting them.

pug 205 gti

Thanks for the advice.i previously looked on schumachers website under the cs electronic section. but they didnt have it advertised so that got me thinking they won,t advertise it because you,ll need a wheel barrow full of cash or possibly a second mortgage to pay for it!!
although it really looks the business.

rezenclowd3

iTrader: (17)

339 Euros.....but I wan't one SO BAD! ;-)

STLNLST

iTrader: (32)

Schumacher England has some of the items that the USA store doesn't carry.

jla8874

iTrader: (23)

I haven't heard anyone mention the tweak station in the Hudy All in One, whats wrong with it? Other than the fact you have to put your gauges on your car to use it, its a finely machined piece of aluminum in my opinion.

espresso1967

iTrader: (18)

I was looking at the Hudy all in one, anyone using this and what is your opinion on this compared to the unity. Now I would only be using this for a 1/10 pan car.

tpczx6

iTrader: (3)

If you are ONLY using one for 1/10 Pan cars you will only need one of the $30 to $40 ones from MIP or Speedmind.

espresso1967

iTrader: (18)

There are a few items on speemind's site http://www.speedmind.net/english/sp5/sp5.htm which one should I consider?

tpczx6

iTrader: (3)

Part # pt 200 UNIVERSAL TWEAK MASTER 2

and Part # rg 10 PRECISION RIDE HEIGHT GAUGE

Fred_B

iTrader: (1)

I've used a bunch of tweak stations over the years and mine usually stays packed away in the box. For sedans, they're a must have for most but not all that important for me in 12th.

The single most important part about tweaking a 12th is getting the front end the same on both sides. Check the axle heights with a droop gage and take a quick look at the springs. Uneven axle height or a collapsed spring will screw up the car on the track no matter how you tweak it.

More often than not, the springs won't be the same after a couple of runs. Just shim the shorter spring so that it has the same preload and it'll be fine. New springs will change and take a set so pay more attention when they're new.

espresso1967

iTrader: (18)

Ok so we all agree that Unity Tweak is good, now do I still need droop and hight gauges?

espresso1967

iTrader: (18)

Remember this is for the crc gen x 10 pan car.


Thanks in advance for everyones help.