traxxas wheelie bar problem
#1
traxxas wheelie bar problem
The traxxas wheelie bar has some serious mounting issues, has anyone figured out a easy mod to remedy this? If not who makes a decent wheelie bar that doesn't have these problems.
#2
Tech Prophet
iTrader: (9)
Join Date: Nov 2014
Location: Far south suburbs of Chicago area
Posts: 17,621
Trader Rating: 9 (100%+)
For which vehicle?
#3
If its the Rustler/Stampede version that snaps into place, use two zip ties around the snap on piece through the wheeled portion to secure it. It will never pop off again.
I set mine one from the highest position so it can still wheelie but doesnt interfere when offroad.
I set mine one from the highest position so it can still wheelie but doesnt interfere when offroad.
#5
If its the Rustler/Stampede version that snaps into place, use two zip ties around the snap on piece through the wheeled portion to secure it. It will never pop off again.
I set mine one from the highest position so it can still wheelie but doesnt interfere when offroad.
I set mine one from the highest position so it can still wheelie but doesnt interfere when offroad.
#6
#7
Just throw the two zip ties around it and make sure the wheel nuts have some lock tite on the threads and you should be good. Ive had my Stampede for a while and never had an issue with the stock wheelie bar.