1/12th Scale Wiring...(1S)
#16
#17
#22
Super Moderator
iTrader: (63)
Join Date: May 2005
Location: a very small town in wisconsin that is in the middle of absolutely no where
Posts: 5,155
Trader Rating: 63 (100%+)
hers mine i have a little bit of wiring left. was in a hurry to run this car this weekend. i got the new lipo chassis on fri.for the sp12x had to work sat. and ran the car sunday. so off to clean up a wiring a little. jeremy
#23
Here's mine...just finished building and the wiring...
#24
Tech Champion
Thanks Jaybee
#25
ok, no laughing.
#26
Tech Apprentice
Wiring
I use a clear mounted body to help me keep the wiring on track and not hitting the body..
#27
Tech Regular
iTrader: (9)
Here is mine.
CRC Gen-XL; Tekin RS; TQ Booster; Micro Spektrum Rx; SMC 1S; Tekin Redline 13.5; JR 3650 Servo; AMB; 10gr added weight to get to 730gr.
I can still cut off the two switches (power on when I connect the battery). Also, want to change wires to motor to 18ga.
If anything, there is boat loads of room on cars these days. Back when, we had to find a spot for the huge "house" X-ponders (no personal X-ponder existed).
CRC Gen-XL; Tekin RS; TQ Booster; Micro Spektrum Rx; SMC 1S; Tekin Redline 13.5; JR 3650 Servo; AMB; 10gr added weight to get to 730gr.
I can still cut off the two switches (power on when I connect the battery). Also, want to change wires to motor to 18ga.
If anything, there is boat loads of room on cars these days. Back when, we had to find a spot for the huge "house" X-ponders (no personal X-ponder existed).
#28
#29