1C Lipo 1/12 Racing Questions
I know some of the answers are in the 1/12 scale fourm but looking for the answer is hell! I have a few questions that I can't find.
1. If you use a lipo reciever pack (I use a 180mah 2C pack) will you need a voltage regulator to bring it down to 6v for the reciever. 2. I will be racing 13.5 at our track. The track is med size, I ordered 72,73 and 74 spur. What size pinions should I buy? 3. I am using the LRP SPX stock spec esc, should I use any of the breaking profiles on this esc? Thank you guys for your help. |
Originally Posted by gijoe64
(Post 6548894)
I know some of the answers are in the 1/12 scale fourm but looking for the answer is hell! I have a few questions that I can't find.
1. If you use a lipo reciever pack (I use a 180mah 2C pack) will you need a voltage regulator to bring it down to 6v for the reciever. 2. I will be racing 13.5 at our track. The track is med size, I ordered 72,73 and 74 spur. What size pinions should I buy? 3. I am using the LRP SPX stock spec esc, should I use any of the breaking profiles on this esc? Thank you guys for your help. On the Horsham Racing thread they posted a roll out of 80-82mm using a 13.5. Those guys are some of the best on the east coast. The rollout also depends on your tire size. I use this site to help me figureout what pinion to use with the spur U choose. http://www.gearchart.com/index.cfm?f...n=chart.create . I'll be using Speed Passion ESC's so I really can't help with the SPX until my friend buys his. Sorry. Hope the rest helps. |
spx settings: 2-8-1-1
|
Thanks guys for your help
|
All times are GMT -7. It is currently 02:37 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.