rdub202

iTrader: (19)

whats the advantage of these?
i think im just gonna get it together then run it a few then do the changes-or would that just be stupid because i would be taking it back apart? I JUST WANT TO RUN IT!

NVisible

iTrader: (1)

.....such as?

NismoSkyline17

The 2+1+1 pin holders and new hingpins. The ones for the FK.

Rob Mincey

The low ratio pulleys will help the car's drivetrain spool up faster. The short arms seem to make the car transition from side to side faster.

Rob

rdub202

iTrader: (19)

okay im gonna call the lhs tomorrow and see if they have this stuff and then go and get it if they do. thanks everyone

Deves

iTrader: (2)

pn#s for short arm conversion


frft arms
30-2159 (2)
hinge pin holders
30-2040
30-2032 alum nut
rear

arms
30-3159
holders 30-2040 total of 7 should have one solid plastic one that goes on the rear of the frt right bulkhead
30-2032 total of 7 frt and rear

30-9319 spacer kit

The rear hinge pins are a little long but if you have a dremel you can cut them to fit.

I think that is it

NVisible

iTrader: (1)

are those hinge pin holders different from the ones that come with the FOC kit?
thanks a lot for your help btw

Deves

iTrader: (2)

Yes they are,, They have a hole that the aluminum nut fits into instead of putting screws into the plastic holders like on the FOC

NVisible

iTrader: (1)

well darn. here i was hoping id save a little cash.

thanks again

dado11g

iTrader: (1)

you dont absolutely need the different hinge pin holders and pins. all you need to do is find a way to hold them in. that is what i did. im a really cheap guy.

(V)r>?ä®?@¢uD@

hey guys i got my xray running (t1r) with the same gear from my Barracuda (r2) but i thought some thing was holding it back from accelating wooohhh i said in my head shafts are better performers. I was like i give it full throttle and i was waiting for it to reach top speed but in my other car as soon as i hit full throttle it was there. Is there anyway i can improve on this, i have tried changing pinions and freeing up the drive train but it is very free and the belts are runnning very smooth

any help ????

thanks

JDXray

iTrader: (3)

the low ratio pulleys could give you an extra jump. Whats your spur/pinion?

DavidAlford

iTrader: (32)

I should have pictures of my stuff tomorrow. I'm willing to sell the parts as a package.

Deves

iTrader: (2)

wait whoa what are you selling?

onebeatuptc3

iTrader: (3)

IM getting my t1fk this weekend (used of course). I cant wait, because its my first "luxury" rc. Its even got black powder coated bulkheads . Anything i should know about the xray before i go racing with it, like its weak spots?

O ya, and how much is a replacement set of bearings for the t1fk?