K.Copeland

iTrader: (96)

I'm running an Orion servo in my T3, fits fine.

Still Bill

iTrader: (16)

Any spacers required between the servo ears and the posts?

mok

iTrader: (9)

Futaba S9551 fits the servo posts without modification.

mikel33

iTrader: (2)

yep. running same servo, no mods.

K.Copeland

iTrader: (96)

Couple pics of the Orion

chicky03

iTrader: (1)

These are a nice upgrade for the gear diff conversion.

http://www.xceedrc.com/news/46/Xceed...1-and-733.html

Available at www.serpentamerica.com

cyclone x

iTrader: (3)

how do you like that servo from orion

K.Copeland

iTrader: (96)

I can't comment on the servo as I haven't driven the car yet. Got the car in a trade 2 months ago and it's been sitting on the shelf.

immrwright7

iTrader: (1)

So I finally finished putting together my XRay and so far i'm happy need to add some extra shims in order to get the servo the correct clearance.

Still Bill

iTrader: (16)

I have 2mm spacers between the posts and my S9551 servo. Eliminates one angle (side to side) of the linkage.

Goingfast

iTrader: (29)

Have the Gear Diff ( 38T pulley) NIP for sale..37.00 shipped usa only..Please PM

mikel33

iTrader: (2)

I have those also. I was only talking about actually modifying the servo.

michael.

yodace

iTrader: (8)

Do you guys have any setups for a low grip asphalt track? The stock setup worked ok but was alittle loose.

mwoods

Have a look on the xray forum martin hudy has a good starting
setup.

Way2Evl

iTrader: (9)

I have read this whole thread and I see a lot of people referring to the pro's set up for reference, and if there is one thing I learned this weekend with talking to the guys is that the pro's cars are not like ours. They have many changes they have made to parts and setup that cant be put on a set up sheet. I'd think it be best for one to take notes from setups of people who are fast at your local track that run the T3. Correct me if I'm wrong.