Pro 10: 235mm Le Mans Prototype Pan Car Discussion
#1486
Tech Elite
iTrader: (5)
Other than the SpeedMerchant that isn't out yet, what are our current options for 235mm other than the Serpent S110 w/ Pro10 kit?
Anyone else make a pro10 specific chassis? I mean if we are going to say 235mm what can we recommend?
#1487
Tech Fanatic
iTrader: (35)
Very good point, kinda hard to get people started in a class when no one can walk into the average hobby shop and pick a 235mm car off the shelf lol.
I listed a few links below, but other then those and the speedmerchant roadkill 10 your looking at the older Associated RC10l2 which is getting hard to find but still competive(2wdrive runs a modded RC10L2). They lack the newer suspension designs but old stuff like the Bolinks, Deltas, or vintage ebay finds are 235mm. Then my personal favorite is the custom built prototypes that make the hobby really fun. I'm sure there is other options I'm missing...
Corally 10SL 235mm
http://www.stormerhobbies.com/cgi-bi...ns&pn=COR00049
CRC GenX10 235mm conversion kit (rear widening achieved by hub extensions)
http://www.stormerhobbies.com/cgi-bi...=ns&pn=CRC1711
CRC GenX10 235mm conversion kit (rear widening achieved by pod widening)
http://lajf.se/pshop/index.php?id_ca...gory&id_lang=1
235mm axles/diffs for conversions or higher quality replacement parts
http://teamirsrc.com/index.php?main_...4alh29sv1rmo62
I listed a few links below, but other then those and the speedmerchant roadkill 10 your looking at the older Associated RC10l2 which is getting hard to find but still competive(2wdrive runs a modded RC10L2). They lack the newer suspension designs but old stuff like the Bolinks, Deltas, or vintage ebay finds are 235mm. Then my personal favorite is the custom built prototypes that make the hobby really fun. I'm sure there is other options I'm missing...
Corally 10SL 235mm
http://www.stormerhobbies.com/cgi-bi...ns&pn=COR00049
CRC GenX10 235mm conversion kit (rear widening achieved by hub extensions)
http://www.stormerhobbies.com/cgi-bi...=ns&pn=CRC1711
CRC GenX10 235mm conversion kit (rear widening achieved by pod widening)
http://lajf.se/pshop/index.php?id_ca...gory&id_lang=1
235mm axles/diffs for conversions or higher quality replacement parts
http://teamirsrc.com/index.php?main_...4alh29sv1rmo62
#1488
Tech Elite
iTrader: (5)
Very good point, kinda hard to get people started in a class when no one can walk into the average hobby shop and pick a 235mm car off the shelf lol.
I listed a few links below, but other then those and the speedmerchant roadkill 10 your looking at the older Associated RC10l2 which is getting hard to find but still competive(2wdrive runs a modded RC10L2). They lack the newer suspension designs but old stuff like the Bolinks, Deltas, or vintage ebay finds are 235mm. Then my personal favorite is the custom built prototypes that make the hobby really fun. I'm sure there is other options I'm missing...
Corally 10SL 235mm
http://www.stormerhobbies.com/cgi-bi...ns&pn=COR00049
CRC GenX10 235mm conversion kit (rear widening achieved by hub extensions)
http://www.stormerhobbies.com/cgi-bi...=ns&pn=CRC1711
CRC GenX10 235mm conversion kit (rear widening achieved by pod widening)
http://lajf.se/pshop/index.php?id_ca...gory&id_lang=1
235mm axles/diffs for conversions or higher quality replacement parts
http://teamirsrc.com/index.php?main_...4alh29sv1rmo62
I listed a few links below, but other then those and the speedmerchant roadkill 10 your looking at the older Associated RC10l2 which is getting hard to find but still competive(2wdrive runs a modded RC10L2). They lack the newer suspension designs but old stuff like the Bolinks, Deltas, or vintage ebay finds are 235mm. Then my personal favorite is the custom built prototypes that make the hobby really fun. I'm sure there is other options I'm missing...
Corally 10SL 235mm
http://www.stormerhobbies.com/cgi-bi...ns&pn=COR00049
CRC GenX10 235mm conversion kit (rear widening achieved by hub extensions)
http://www.stormerhobbies.com/cgi-bi...=ns&pn=CRC1711
CRC GenX10 235mm conversion kit (rear widening achieved by pod widening)
http://lajf.se/pshop/index.php?id_ca...gory&id_lang=1
235mm axles/diffs for conversions or higher quality replacement parts
http://teamirsrc.com/index.php?main_...4alh29sv1rmo62
Forgot about the Corally, I think I like that. And, Stormer has parts? How cool is that?
#1489
Tech Fanatic
iTrader: (35)
Corally is time tested quality for sure. Ya Stormer is great, he carries just about everything pan car.
front end widening parts for the Associated RC10R5, uses the CRC hub extensions on the rear.
http://www.fulloption.co.uk/RC10R5Parts.html
#1490
Tech Elite
iTrader: (5)
Ya I never did my homework back in school but I do it nowadays lol.
Corally is time tested quality for sure. Ya Stormer is great, he carries just about everything pan car.
front end widening parts for the Associated RC10R5, uses the CRC hub extensions on the rear.
http://www.fulloption.co.uk/RC10R5Parts.html
Corally is time tested quality for sure. Ya Stormer is great, he carries just about everything pan car.
front end widening parts for the Associated RC10R5, uses the CRC hub extensions on the rear.
http://www.fulloption.co.uk/RC10R5Parts.html
Should we get something going?
Higgins? Pro10? Go fast?
#1491
I have a Tekin RS2 collecting dust. I'm seeing a 10.5 Trackstar motor and 905B body in my near future. This would be the more power and speed class the club has been missing. Lots of throttle control and lap times maybe less than a second faster. Why run Mod when you can run..... PRO 10 235.
As creator of this thread, I support this post.
As creator of this thread, I support this post.
Last edited by liljohn1064; 07-07-2014 at 10:40 AM. Reason: Peugeot 905B
#1493
Tech Elite
iTrader: (13)
RC devil makes a 235MM Pro10 car that is wicked but expensive
http://www.freemart.de/rcdevilshop/i...9571c9e8cd83a9
Also LAJF makes a widening kit for the Xray X10 link that is nice.
Uses wide rearpod.
You do need a IRS axle tho.
Regards Roy
http://www.freemart.de/rcdevilshop/i...9571c9e8cd83a9
Also LAJF makes a widening kit for the Xray X10 link that is nice.
Uses wide rearpod.
You do need a IRS axle tho.
Regards Roy
Last edited by Pro10noob; 07-06-2014 at 07:44 PM.
#1494
Tech Apprentice
#1495
Tech Master
iTrader: (5)
Ya I never did my homework back in school but I do it nowadays lol.
Corally is time tested quality for sure. Ya Stormer is great, he carries just about everything pan car.
front end widening parts for the Associated RC10R5, uses the CRC hub extensions on the rear.
http://www.fulloption.co.uk/RC10R5Parts.html
Corally is time tested quality for sure. Ya Stormer is great, he carries just about everything pan car.
front end widening parts for the Associated RC10R5, uses the CRC hub extensions on the rear.
http://www.fulloption.co.uk/RC10R5Parts.html
Stormer Hobbies.....AAA+++
#1496
1 or 2 weeks ago, Protoform posted they were coming out with a new 235mm body. I wonder how that is coming along?
#1497
#1498
Tech Elite
iTrader: (5)
RC devil makes a 235MM Pro10 car that is wicked but expensive
http://www.freemart.de/rcdevilshop/i...9571c9e8cd83a9
Also LAJF makes a widening kit for the Xray X10 link that is nice.
Uses wide rearpod.
You do need a IRS axle tho.
Regards Roy
http://www.freemart.de/rcdevilshop/i...9571c9e8cd83a9
Also LAJF makes a widening kit for the Xray X10 link that is nice.
Uses wide rearpod.
You do need a IRS axle tho.
Regards Roy
A 4 turn in your 1150gram pancar? Can you imagine?
http://www.youtube.com/watch?v=98SCIC_yT5s
Last edited by celt; 07-07-2014 at 04:30 AM.
#1499
Tech Fanatic
iTrader: (35)
I'd be all over a Pro10 class if you guys are down to get something going, I guess I really need to get down to Madison and put in some track time with you guys.
I have a Tekin RS2 collecting dust. I'm seeing a 10.5 Trackstar motor and 908B body in my near future. This would be the more power and speed class the club has been missing. Lots of throttle control and lap times maybe less than a second faster. Why run Mod when you can run..... PRO 10 235.
As creator of this thread, I support this post.
As creator of this thread, I support this post.
Would you by chance have a link to this post? I'm curious now as the more body choices the better.
Last edited by OrganicMechanic; 07-07-2014 at 07:44 AM.
#1500
Tech Fanatic
iTrader: (35)
MARCCA Pro10 class
Looking for opinions/suggestions on Pro10 class rules from the MARCCA racers and any other Wisconsinite looking to run Pro10 @ MARCCA. What do you guys think about these rules:
any 10.5T
open ESC, open timing
any 2S lipo
235mm chassis
non-nitro 235mm bodies
1150 gram min weight
open tire
*these are basically the dutch rules with the exception of only 235mm chassis
any 10.5T
open ESC, open timing
any 2S lipo
235mm chassis
non-nitro 235mm bodies
1150 gram min weight
open tire
*these are basically the dutch rules with the exception of only 235mm chassis