Qatmix

What is the largest spur that people have fitted on the f109? I use a 105 spur with a 20t pinion with my 13t brushess (2 cell). It's quick on our circuit(small and technical) but I Would Kim more gearing options but the 20t is the smallest 0.4 pinion available.

GasGod

iTrader: (4)

????huh???

alphacat

iTrader: (7)

Great Job!!! I have enjoyed reading about the wins!!

FrankB

iTrader: (2)

huh what?

I was replying to someone's comment

PDM

Congratulations InZane

GasGod

iTrader: (4)

sorry-

Acid_CZ

not enough posts to insert links (°_o)

Hello,
what body and wings are used here? Looks brilliant
(sorry if you answered this before, didnt find that)
Also congratulations for your succes

M.Abramowicz

iTrader: (1)

Hi!

For 99% rear wing is: TRG (#TRG5027) Rear Wing For Tamiya F103 (White)

and front is: TRG (#TRG5061) Front Wing White Advance or maybe
TRG (#TRG5026) Front Wing For Tamiya F103 (White).

Hm, in my own chassis I don't feel difference for front wing, only
weight balance made difference ...


Regards!
m.

InZane

iTrader: (2)

Body; TRG SW-0N, TRG3001



Front wing; TRG ADVANCE Formula Front Wing, TRG5061



Rear Wing; TRG Formula standard type rear wing, TRG5027

Link to TRG site>>

Thanks everyone for your kind words!

Acid_CZ

Thanks for info

njt

Won the summer series at Ardent raceway. my F1 was powered by Team Powers motors, l was using there 10.5 Superlite motors , they are very suitable for F1 .
Would like to thank Team Powers UK for there support.

InspGadgt

Well I finally got the 104 front suspension and wheels on my 109 and the F201 body all mounted up. Threw on a quick paint job to make it easier to see how the body looks...it does look a tad on the wide side for how narrow the car is running the F104 stuff but i still think it looks a lot better than most of the F104 bodies and the F103 bodies cut long to fit. I'll post up a pic later tonight. Also I picked up the 79 Lotus kit for the body and will probably be fitting that on my 109 eventually

InspGadgt

As promised...sorry for the crappy camera

McLarenFan

iTrader: (1)

After reading thru this thread i decided to take the plunge and get a F1-09 too. However i quickly found i was missing a parts bag and after contacting 3racing , it has been almost a week and still i have had no answer from them and am begining to think i won't get one either.

I have looked and can't seem to find what i need to complete the car anywhere. I am missing the "MB" parts bag , the one with the battery retainer screws , servo saver bits and all the M4 nuts.

Does anyone know who i should contact or where i can get these parts from?

Am rather dissapointed at 3racing's lack of customer service.

lightfoot

iTrader: (2)

UF1 Winter Series at TQ

2 races a month
Starts Saturday November 6th
Finishes Saturday February 19th
All races will be at TQ
Rubber tires ONLY ( any brand )

TQ will be the only suppler of Shimizu tires in the America's...

rules have been modified slightly but chassis requirements have and will not change...

for more details check out :

http://www.charleslightfoot.com/UF1/UF1_home.html

here we go again baby

And Thank you Sean for providing us a great facility as well as providing us locally these hard to get tires... very cool of you dude...