gsxr0311

iTrader: (19)

the wings will fit but the body wont fit rite. f109 is longer than the f103 and f104 is narrower than both cars. basically all cars have a different body in one way or another, none are the same size. looks like the 103 diffuser will fit the 109.

mac853

Then you mean there's no aftermarket body could fit F109, isn't it?

FRENANDOALFONDO

Please, Does anybody know any confidence online shop where to buy f1 3racing spares?

Hey Chris

iTrader: (30)

Can anybody tell me which Intellect battery will fit???

And which pinion will be best with the Hobbywing Ezyrun 13T?

Thanks

snoopyrc

iTrader: (2)

Im sure that several will fit. Its just a matter of how you trim it.

mac853

Excuse me, i have it in my hands but didn't start already to built my 1st F1 ever.
You mean trim, but explain me trim for what?
Please explain me what i need to know for F1 newcomer.

Best regards

NiMo

Trim - as in - How you cut it out.

Some shorter F103 shells may fit if you don't cut the rear out on the cut line, and/or you don't cut the front cut lines around the front suspension arms.

Careful cutting of a 103 shell made for the 260mm F101/102/103 range can then fit the 270mm F104 and the 275mm F109

mac853

Oh, i almost forgot F104 is longer than F103.
Just remain to know if these aftermaket bodies fits F104 or not?
Maybe not these in the market, could be the coming soon ones, perhaps.

And 1 more question: Why the left and right sides of motor mount are equal, i don't believe is designed to put the motor opposite position, i guess it is used to put 25X25mm cooling fan, isn't it?

InZane

iTrader: (2)

The right and left side motor mounts are not exactly the same - I'm writing a step by step guide for the F1-09 at a Swedish Forum. You can find detailed pics there -- Link>>

TAMAK

iTrader: (29)

Stock silver can and the stock 98t spur. what size pinioon do i use?

rc-zombies

iTrader: (9)

This Renault was cut for the F103 chassis..but fits ok for the longer F109. Just had to move the rear body holes back approx. 20mm. Luckily I have 2 more unpainted bodies in the garage..next time won't cut out the rear area too much. I also have a McLaren I posted earlier.

rc-zombies

iTrader: (9)

I've gotten all my spares from RcMart in HK. you can also try RcMarket and RcModel.

Smokem Racing

This looks like an interesting chassis. Can you adjust the front end ride height?

Hey Chris

iTrader: (30)

Anybody help on this???

InZane

iTrader: (2)

There are offset ball bearing inserts for the rear diff axle, bu you can't adjust the front ride height without modifications - more pics>>