3racing F109
#871
Will a F104 spur fit onto stock F109? Just stripped the 64p 98t pinion and have a 93t Tamiya F104 spur here. If not, anyone know where to get spur for F109 in 48p with link to site etc?
#873
Tech Elite
iTrader: (149)
Selling my F109
hate to do this but I need to sell my F109. I won't have the chance to race this summer and some other financial responsibilities have come up.
http://www.rctech.net/forum/r-c-item...een-raced.html
http://www.rctech.net/forum/r-c-item...een-raced.html
#875
Tech Apprentice
on 64 dp i found 24 thooth was a good start with silver can motors
#878
#882
Tech Addict
iTrader: (12)
Ok, I just ordered the F1-09 kit, and should arrive within the week!! I am getting the Novak GTB 10.5 brushless setup, with a Airtronics M8 w/ spektrum reciever and a 5000mah 2s Lipo tomarrow from a friend. Is this a pretty dencent setup? What servo works wonders with these cars?
#884
Tech Initiate
iTrader: (1)
Hi im not sure where you are i think the alloy castor adjuster is almost a must , abe racing in the uk should have them also rcmart ( hk )should have them too , as for servos i tried with a stock size servo but soon changed to a low profile as the steering links " worked alot better"
Andy
Andy
#885
Lots of top 3 finishes.
We ran with a fast 109 guy at Horsham and by the end of the indoor
season he had his car dialed.
That being said I feel the wider wb. and larger tires that the 109/103 uses
is a big advantage over the 104 cars. I said it before but if the top car
comes out swinging 103 size tires the 104 is going to be the odd car out (good for us)