Rotor magnet test I-Gauss or others
Anyone have Gauss meter numbers on any brushless Rotors ?
Please post numbers & indicate if you tested it new or used. Thanks in advance. |
novak rotor numbers are worthless if not metered after they have had a couple runs on them...
any novak rotor over 1300 is good team epic rotors will all meter out very close to the same 1280 range get any of them over 200 and they fade |
thanks for the info.
im hoping others can share their readings too. |
The I Gauss definately does what it says. you will tell a defference between a weak and strong magnet on the track. I think that it is a good idea to check magnets especially after you get a motor hot, 175 and over. I just got my I gauss and it does a really good job. others also work but arent as user friendly in my opinion.
|
i have a trinity duo 10.5 that reads 1330 and a novak 10.5 that reads close to 1400
|
Pardon me, what is a Gauss meter?
|
gives you a reading of the stength of the rotors magnet
|
Is the magnet stronger for lower or higher turn motors? Does it matter?
|
Originally Posted by rosko
(Post 6225215)
i have a trinity duo 10.5 that reads 1330 and a novak 10.5 that reads close to 1400
|
Originally Posted by koz47
(Post 6443707)
no such thing as 1400 gauss novak rotor ,sorry..
Also... Low turn motors have much stronger magnets. On my checker Spec motors are around the 1300 area where as modifieds are almost 1700. And just to make you aware, a strong magnet in a spec motor is not always faster. There is a reason those magnets are weaker. |
Originally Posted by Dragonfire
(Post 6444779)
just to make you aware, a strong magnet in a spec motor is not always faster. There is a reason those magnets are weaker.
DK |
Originally Posted by PartTime
(Post 6445314)
And what would that reason be ?
DK |
Originally Posted by adam lancia
(Post 6445381)
Total guess on my part but would it be that a weaker magnet allows them to spool up faster and maybe produce a little more umph...:confused:
I think this is correct. |
You generally can't compare numbers between brands because of where the magnet is on the rotor, and how it's positioned in relation to the piece in the unit that measures its magnetic field. Use it to compare your rotors of the same brand, though, to see which ones are the best, and which are fading.
In my experience, a strong rotor will run cool, have good power down low, and good top speed. You'll need to gear it appropriately, a stronger rotor will need more gear than a weak one. A weak rotor generally won't have as much punch, will still be pretty fast on top, won't need as much gear, and will be prone to running hot. I think these meters are a good tool to have an idea of where your rotors are at, and to weed out the bad ones, but I wouldn't bother using them to try and get a magical rotor. Leave that to the slow oval guys grasping at anything they can to get faster. |
anyone try using one of these on novak ballistic rotors? I'm not sure if the ballistic rotors are the same as older novak motors, but the ballistic ones are too long. You can't set them all the way down on the meter.
|
All times are GMT -7. It is currently 01:58 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.