Questions about my 17.5 Trinity Duo
#2
Tech Champion
iTrader: (38)
Assuming the original Duo and not the Duo2, then there are 3 timing locations. Ive seen people say they are 0,10, 20 and some say 10, 20, 30. Furtherest clockwise is 0 (or 10). Back the screws out near where the pinion goes. Turn to line them up with the desired timing location and screw back together.
#3
the stock timing is 20 or middle hole
#4
I would say 20 deg is the middle hole... mine is 20deg. plus maxium advance timing ESC ...I set up my car with the oneway the reason it is easy on the motor and help reduce the temperutre than spool...
#7
idk thats how my motor came . is the a dent in the can of the motor?
#10
Yeah, I took the 3 very long screws all the way out. Maybe it just needs a little more muslce? I don't like forcing too much in this hobby... as things tend to snap I just wanted to be sure there wasn't some special, secret, hidden thing I gotta depress or soemthing to get the endbell to turn.
#11
Where can I find a 17.5 duo 2? Everywhere I look on line they are out. Thanks for the help.
#12