Ask Todd Hodge..aka "Hodgimoto"
#1006
Tech Champion
iTrader: (17)
Todd- I don't know if you've heard anything about the Mazda Race Charlie Barnes is putting on in September. I didn't see your name on the entry list. You may want to check it out. Looks like it's going to be a fun race. Here's a like to the thread.
http://www.rctech.net/forum/showthre...56#post1047356
http://www.rctech.net/forum/showthre...56#post1047356
#1007
Hey Todd is there anyway I could get the plans for the milling out you did on the chassis I love that it looks much better then others I have seen I like the design, or is this your own thing??? anyway I would love to be able to do the same thing if it is cool with you thanks
KYLE
KYLE
#1008
Todd,
When running a spool does the 41t pulley help to give back turn-in steering or should one look to gain steering back through different ways?
Thanks,
E
When running a spool does the 41t pulley help to give back turn-in steering or should one look to gain steering back through different ways?
Thanks,
E
#1009
liter2-What up Dave's bro?.....lol!
jkerr-Thanks for the reminder.....just sent the entry in today.
utracer-I am not sure if Chris really has a template for it. He says he draws it onto the chassis with a pencil then goes to town with the dremmel and files.
EricF-Yes that is exactly what the overdrive does. I think its a must with a spool in a XXX-S.
jkerr-Thanks for the reminder.....just sent the entry in today.
utracer-I am not sure if Chris really has a template for it. He says he draws it onto the chassis with a pencil then goes to town with the dremmel and files.
EricF-Yes that is exactly what the overdrive does. I think its a must with a spool in a XXX-S.
#1010
Big T-- The reason I was curious in the amount of flex in the milled chassis was due to a lot of my local racers run the X-ray. I have driven their cars with the different top plates and can tell a difference between the stiff ones and the flexy ones. Most of the fast Xray dudes are running the plastic chassis as well to give their car a lil more flex. I dunno.....their cars seem to like the flex in our parking lot track. It seems to make them more consistant. Just wondering what your take is on the whole flexing chassis issue.
Thanks
Brant
Thanks
Brant
#1012
Tech Apprentice
Yo!
#1013
Originally posted by Matt Francis
Yo!
Yo!
#1014
Tech Rookie
woww, Matt online.
Hello! Matt.
Hello! Matt.
#1015
Originally posted by MDawson
YAO
YAO
YYOOOOO !!!......No Checks!
Brant
#1016
ok you mind if I go off the pick of your car and copy the milling on the chassis Todd??? looks awsome much better design than others I have seen
#1017
pookyt-I am sure it does make a considerable difference. However I have never tested the stock chassis and this new milled chassis back to back.
MF-YO
utracer-Go for it!!
MF-YO
utracer-Go for it!!
#1018
Thanks Todd ! Have you ever tested the stocker against the G+ chassis? Say on a med traction semi prepped parking lot?
Thanks
Brant
P.S. Do you, or have you ever run the ceramic bearings?
P.P.S. Is the black belt kit really worth the money? J/K
Thanks
Brant
P.S. Do you, or have you ever run the ceramic bearings?
P.P.S. Is the black belt kit really worth the money? J/K
#1020
Tech Adept
Todd, I like the look of your milled out chassis, this might be a stupid question but do you use it outside like this??
The pic looks like it but i thought i'd ask-sorry
The pic looks like it but i thought i'd ask-sorry