Corally RDX Phi 09
#331
[QUOTE=Isaac;6573304]I actually have an 88 spur and 35 pinion. Straight is about 110 feet long. Tekin RS and Duo2.
[QUOTE]
HEY ISAAC, WHAT KINDA FINAL DRIVE YOU GOT 1.77 OR 2.0?? WITH THE TEKIN ANY IDEA ABOUT HOW MUCH MOTOR TIMING AND BOOST YOU HAVE? WE ARE RUNNING ON AN TRACK ABOUT 100 X 40. STILL NEW TO TOURING CAR AND LEARNING EVERYDAY ABOUT SET UP'S.... ANY HELP IS A PLUS
THANKS
JAYRO
[QUOTE]
HEY ISAAC, WHAT KINDA FINAL DRIVE YOU GOT 1.77 OR 2.0?? WITH THE TEKIN ANY IDEA ABOUT HOW MUCH MOTOR TIMING AND BOOST YOU HAVE? WE ARE RUNNING ON AN TRACK ABOUT 100 X 40. STILL NEW TO TOURING CAR AND LEARNING EVERYDAY ABOUT SET UP'S.... ANY HELP IS A PLUS
THANKS
JAYRO
#333
Tech Elite
iTrader: (39)
[QUOTE=Jerzy JayRO;6585067][QUOTE=Isaac;6573304]I actually have an 88 spur and 35 pinion. Straight is about 110 feet long. Tekin RS and Duo2.
HEY ISAAC, WHAT KINDA FINAL DRIVE YOU GOT 1.77 OR 2.0?? WITH THE TEKIN ANY IDEA ABOUT HOW MUCH MOTOR TIMING AND BOOST YOU HAVE? WE ARE RUNNING ON AN TRACK ABOUT 100 X 40. STILL NEW TO TOURING CAR AND LEARNING EVERYDAY ABOUT SET UP'S.... ANY HELP IS A PLUS
THANKS
JAYRO
Try full turbo and about 20 boost. Play and add more time delay as its needed. And about 10 degress on the can.
HEY ISAAC, WHAT KINDA FINAL DRIVE YOU GOT 1.77 OR 2.0?? WITH THE TEKIN ANY IDEA ABOUT HOW MUCH MOTOR TIMING AND BOOST YOU HAVE? WE ARE RUNNING ON AN TRACK ABOUT 100 X 40. STILL NEW TO TOURING CAR AND LEARNING EVERYDAY ABOUT SET UP'S.... ANY HELP IS A PLUS
THANKS
JAYRO
#334
Tech Elite
iTrader: (5)
I'm running the 2.0 My final drive ratio is between 5.1 and 5.5. Zero on the motor, full turbo and timing. I come off cool like 140 or so on the the present layout. Should have finished 4th in the A last week but friend and arch rival The Teacher kind of passed me using my passenger side door to get by.
HEY ISAAC, WHAT KINDA FINAL DRIVE YOU GOT 1.77 OR 2.0?? WITH THE TEKIN ANY IDEA ABOUT HOW MUCH MOTOR TIMING AND BOOST YOU HAVE? WE ARE RUNNING ON AN TRACK ABOUT 100 X 40. STILL NEW TO TOURING CAR AND LEARNING EVERYDAY ABOUT SET UP'S.... ANY HELP IS A PLUS
THANKS
JAYRO
HEY ISAAC, WHAT KINDA FINAL DRIVE YOU GOT 1.77 OR 2.0?? WITH THE TEKIN ANY IDEA ABOUT HOW MUCH MOTOR TIMING AND BOOST YOU HAVE? WE ARE RUNNING ON AN TRACK ABOUT 100 X 40. STILL NEW TO TOURING CAR AND LEARNING EVERYDAY ABOUT SET UP'S.... ANY HELP IS A PLUS
THANKS
JAYRO
#335
THANKS ISACC
#337
WHAT BODIES ARE YOU GUYS RUNNING ON CARPET?
#338
Super Moderator
iTrader: (63)
Join Date: May 2005
Location: a very small town in wisconsin that is in the middle of absolutely no where
Posts: 5,155
Trader Rating: 63 (100%+)
i have been running several different bodies. what i like is. 1/10 RTB GBS (Rubber Tire) - Clear Body - #10224
mazda 6, mazda speed 6, ltc-r rubber tire body. all work very well depends on how much traction you have. mazda 6 gives leat amount of traction. then speed 6 and ltc-r medium traction. and the parma body gives the most grip. have done testing on all the bodies back to back. jeremy
mazda 6, mazda speed 6, ltc-r rubber tire body. all work very well depends on how much traction you have. mazda 6 gives leat amount of traction. then speed 6 and ltc-r medium traction. and the parma body gives the most grip. have done testing on all the bodies back to back. jeremy
#339
Tech Initiate
Hi guys,
I've just order a lipo spec phi 09.. will be a bit of an upgrade from my RDX
I just had a question about running a diff in the front. I see you have to turn the bearing holders around and I think I read earlier that people were having the bearings fall out, so do I've ordered the bearing clips, but do they fit into the plastic bearing holders or do I need to get the alloy ones?
cheers
I've just order a lipo spec phi 09.. will be a bit of an upgrade from my RDX
I just had a question about running a diff in the front. I see you have to turn the bearing holders around and I think I read earlier that people were having the bearings fall out, so do I've ordered the bearing clips, but do they fit into the plastic bearing holders or do I need to get the alloy ones?
cheers
#340
Super Moderator
iTrader: (63)
Join Date: May 2005
Location: a very small town in wisconsin that is in the middle of absolutely no where
Posts: 5,155
Trader Rating: 63 (100%+)
Hi guys,
I've just order a lipo spec phi 09.. will be a bit of an upgrade from my RDX
I just had a question about running a diff in the front. I see you have to turn the bearing holders around and I think I read earlier that people were having the bearings fall out, so do I've ordered the bearing clips, but do they fit into the plastic bearing holders or do I need to get the alloy ones?
cheers
I've just order a lipo spec phi 09.. will be a bit of an upgrade from my RDX
I just had a question about running a diff in the front. I see you have to turn the bearing holders around and I think I read earlier that people were having the bearings fall out, so do I've ordered the bearing clips, but do they fit into the plastic bearing holders or do I need to get the alloy ones?
cheers
#341
Tech Initiate
In NZ we run foams on tarmac so picking a set is hard, I find the spool is just as good but increases tyre wear, so I tend to run a diff on club days.
What are the carpet spec phi09s coming with then, do they have the alloy holders?
even more expense, I spend more than the price of the car on parts already (tuning and spares)
What are the carpet spec phi09s coming with then, do they have the alloy holders?
even more expense, I spend more than the price of the car on parts already (tuning and spares)
#342
Super Moderator
iTrader: (63)
Join Date: May 2005
Location: a very small town in wisconsin that is in the middle of absolutely no where
Posts: 5,155
Trader Rating: 63 (100%+)
In NZ we run foams on tarmac so picking a set is hard, I find the spool is just as good but increases tyre wear, so I tend to run a diff on club days.
What are the carpet spec phi09s coming with then, do they have the alloy holders?
even more expense, I spend more than the price of the car on parts already (tuning and spares)
What are the carpet spec phi09s coming with then, do they have the alloy holders?
even more expense, I spend more than the price of the car on parts already (tuning and spares)
#343
Hi guys can anyone help me with a rough Pin/Spur for 17.5 racing please 48dpi.
Thanks
Thanks
#344
Tech Initiate