TA-05 ver.2
#393
Saw the pic of your verII and was impressed on what you have installed on it. The Carbon rear shock tower from IFS fit on it?
For sale ready to lay the smack down.
http://www.rctech.net/forum/r-c-item...5v-ii-new.html
http://www.rctech.net/forum/r-c-item...5v-ii-new.html
#394
Anyone installed the tamiya's stabiliser bar for TA05? Got myself Tamiya's stabiliser bars and when i tried installing it according to the manual i find some problems installing it to the front lower arm. Does anyone have any step by step pictures on installing it or does anyone have a closeup pic of the whole front part?
#395
Tech Adept
Anyone installed the tamiya's stabiliser bar for TA05? Got myself Tamiya's stabiliser bars and when i tried installing it according to the manual i find some problems installing it to the front lower arm. Does anyone have any step by step pictures on installing it or does anyone have a closeup pic of the whole front part?
I have the 53842 set and from what I remember it fitted as per the attached instructions. I recall there was also some notes in the original manual at the back (where hop ups are ) , that you had to cut the black plastic or something.
I am not at home now , so no pics , but have a look at the original manual too ....
I am not sure if the V2 has the same assembly instructions as the IFS
#396
I have problems where i dont know which black plastic parts i have to cut on my ver2. I have the same stabiliser set as you have but still having a headache on where that part should be cut at.
What issue are you having ?
I have the 53842 set and from what I remember it fitted as per the attached instructions. I recall there was also some notes in the original manual at the back (where hop ups are ) , that you had to cut the black plastic or something.
I am not at home now , so no pics , but have a look at the original manual too ....
I am not sure if the V2 has the same assembly instructions as the IFS
I have the 53842 set and from what I remember it fitted as per the attached instructions. I recall there was also some notes in the original manual at the back (where hop ups are ) , that you had to cut the black plastic or something.
I am not at home now , so no pics , but have a look at the original manual too ....
I am not sure if the V2 has the same assembly instructions as the IFS
#397
Super Moderator
iTrader: (2)
I'm not sure if the original TA05 sway bar kit can fit right(though I'm not saying it won't), but I know that I used the same set that works on the TRF cars(415, 416, etc.), because its mounts were meant for the reversible suspension arms(which the ver.2 uses), & they fit & work perfectly.....
#398
The TA-05 sway bar kit is the correct part, he just needs to cut plastic part A1 at the front so that the sway bar doesn't bind in the front.
#399
#400
Shape the red sections so that they don't interfere with the sway bar
#403
Thanks. Just realised from your pic that you are using upright suspension system. Wondering if anyone using the IFS suspension system installed the sway bar before?
#404
Tech Adept
#405