Losi LCD's

[airborneranger]

Do the LCD's allow for increased steering angle of the front wheels without binding? When I do a full turn, the wheels chatter and vibrate up and down.

[rocketron]

Originally Posted by airborneranger

Do the LCD's allow for increased steering angle of the front wheels without binding? When I do a full turn, the wheels chatter and vibrate up and down.

Your exactly correct - they work very well

[airborneranger]

Nice!

Are the shaft lengths different between the JRX-S and the type R?

[Yeti35]

Originally Posted by airborneranger

Nice!

Are the shaft lengths different between the JRX-S and the type R?

Yes, very different since the first gen car ran shorter A arms. So the LCD's and the CVD's are shorter on that car. Only way you would use the shorter LCD's on the R is when you are running a oneway. Short arms can be a tuning option on the R from the first car, but no one has every really run them.

[Yub, yub, cmdr!]

I'm bummed how Hot Bodies/HPI took the LCD design, made it for the Cyclone, and called it something different.

[Conrad]

Just checked the HB site and it looks like the cyclone runs standard cvd's?

Do the Losi LCD's short or long fit any other car?

[JasonC]

Originally Posted by Conrad

Just checked the HB site and it looks like the cyclone runs standard cvd's?

Do the Losi LCD's short or long fit any other car?

http://www.speedtechrc.com/store/ebp...id=475&id=8134

[mac853]

Originally Posted by JasonC

http://www.speedtechrc.com/store/ebp...id=475&id=8134

I believe this could be LOSA3344 of type R
If the Wheel hexes must be from Losi, then how about the Lock nuts, must also from the same brand?