Shalala

woo woo , all blue parts , quit Good looking......only......

DaveW

iTrader: (1)

How did everyones racing go this weekend?

- DaveW

lem2

iTrader: (6)

Use the tamiya ones, but if you want the AE ones, you'd have to take out a sand paper and carefully sand wach one until it fits perfectly.

donoman

Anyone use a servo saver in conjunction with the crappy little TC3 servo saver? I have a KO Propo 2343... What do you guys recommend?

johnbull

The blue TC3 looks nice but I bet it weighs a ton.

The NTC3 hubs and arms are interesting.

donoman

I am asking about a servo saver because I repeatedly strip my servo gears when I'm racing because... well... I suck!?

trackdesigner71

iTrader: (6)

Hey, I know that this question has been asked before but I need foam tire information. I am racing this thing on carpet and would appreciate any help you guys could provide. How good are Speedmind foam tires too?

crACkeD ChaSsiS

iTrader: (4)

dang havent been here for a while.college really takin over r/c racing.

tc3stocker

for carpet you will run TRC 28mm front and 30mm rear with Plaids up front and Purples or double purples in the rear, you will need to true down the tires and you run double purples in the rear if you want a loose car...................there are many different tires combinations that you can use howecer these are the basic ones..................as to Speedmind tires, I would not suggest them, use either Mono tuning, TRC (trinity), Jaco, or any rims you want with TRC donuts

Hope this helps, I used to run the TC3

kh15

i got my order from tower today!!!!!
got some new fresh kicks from orion, rear shock tower (snapped the first one), and i finally got the all important camber gauge, so anyway i set my front camber to -1 and i dident want even think to change the back because their just the stock settings but i checked them anyway and one is -4 and the other wheel is -5 thats so messed up lol what should it be like -3?

donoman

kh15 guys i know run 1.5 negative camb all around bye

rally

Please conduct all selling in the For Sale forum.

Thanks,
Josh

DRIVEN

I used to set mine at 1.5 - 2 degrees but I get better tire wear when set to 1 degree all around.

A_Stratus

I just milled out my TC3 chassis and I was wondering what that black material is on the side to push the battery towards the drive shaft?

Aaron

BBSpence

iTrader: (64)

I used weather stripping from Home Depot.