TC3 Forum
#4682
Tech Addict
iTrader: (25)
Your best off sticking with the molded tubs on all surfaces. The warpspeed chassis sucks because the chassis is thick and they did not even mill it out so that the diffs, hinge pin blocks, etc would remain at their original height. They just slapped it all together so now basically the whole car rides higher...
The carbon fiber chassis' look sweet and all, but there's a reason why they are never used by the top guys...
The carbon fiber chassis' look sweet and all, but there's a reason why they are never used by the top guys...
#4683
Tech Master
pimpedaccord, yeah I just got the word about that also.
Last edited by webspinner; 04-02-2003 at 05:48 PM.
#4684
ouch that doesnt sound good, i have been happy with my graphite tubs all along anyway.
#4685
Tech Fanatic
Yeah, the graphite tubs are fine. The only disadvantage is that they don't look as cool, but is that really a disatvantage??. And they're much cheeper too !
#4686
Tech Master
posted by Pimpedaccord: Your best off sticking with the molded tubs on all surfaces. The warpspeed chassis sucks because the chassis is thick and they did not even mill it out so that the diffs, hinge pin blocks, etc would remain at their original height. They just slapped it all together so now basically the whole car rides higher...
The carbon fiber chassis' look sweet and all, but there's a reason why they are never used by the top guys...
Pimpedaccord:::: Have you measured the molded chassis thickness. It sounds like you have a problem with a product that is very good. The Warpspeed chassis is 3mm thick and the stock molded chassis looks pretty thick to me!!!!
I am not bad mouthing the molded chassis. I think it works very good.
The carbon fiber chassis' look sweet and all, but there's a reason why they are never used by the top guys...
Pimpedaccord:::: Have you measured the molded chassis thickness. It sounds like you have a problem with a product that is very good. The Warpspeed chassis is 3mm thick and the stock molded chassis looks pretty thick to me!!!!
I am not bad mouthing the molded chassis. I think it works very good.
#4687
Tech Fanatic
The factory guys dont run the graphite plate chassis because they can't. They have to run what AE makes and AE doesnt make a graphite plate chassis. They can only modify the stock chassis to be better.
#4688
The IRS chassis has locations milled in the chassis to lower the components down to the correct height. I just got mine togehter lastnight. It doesn't feel much different, but it is definetly TRICK LOOKING ! We will find out how it performs on Sunday.
Later,
Later,
#4694
Tech Addict
iTrader: (25)
rdub- Just get one of Ray's chassis'. You can't beat it. It's what Dumas has been running too....
Check this for hpi MI info:
http://www.hobbytalk.com/bbs1/showth...threadid=43116
Check this for hpi MI info:
http://www.hobbytalk.com/bbs1/showth...threadid=43116
#4695
Tech Fanatic
Do 'rays chassis' have a website? Where can I see some pictures and information about how much they cost and stuff?