Tamiya F104 Pro!
#1712
This looks great. With that thin appearnce, somebody should produce old F1 bodies like a Lotus 49, Ferrari 312, or even cars from the 70s.
As a newby, what battery are you using?
As a newby, what battery are you using?
#1713
Question that may have been answered already. The F104 comes with foam tires and I know there is rubber but I personally think that the foams will work better to the most part. What are you guys using to true the tires down after they are mounted? What arbor or is there another one that works?
#1714
Tech Elite
iTrader: (24)
Question that may have been answered already. The F104 comes with foam tires and I know there is rubber but I personally think that the foams will work better to the most part. What are you guys using to true the tires down after they are mounted? What arbor or is there another one that works?
#1716
#1717
Tech Fanatic
iTrader: (14)
Finally was able to have a run with the tamiya rubber tyres for the F104.
I've run the car in the past with foams at my local outdoor low to med grip track with the formula tuned motor. While the setup is far from perfect, I've been able to run 19.2's and do 18 laps while using tire compound on the rear only. Many of the local racers have been surprised by it's performance as they feel foams are better for this car.
Ran tonight with no changes to the car other then rubber all round, and was able to in the first heat run 19 laps and 18.4' while using tyre grip.
The car was very loose for the first couple of laps, but then ran quite nice after the tire grip came in to play.
In the second heat, I again had trouble in the first handful of laps with rear grip. Was able to run 18.5' and again the car performance ok.
I had hoped to run again without using any additive, but alais, the clouds opened and the night of racing came to an end.
I will next weekend give them another go and try various amounts of additive and make some set-up changes, but the comments from a couple of drivers afterwards was positive to say the least.....a good start in my book.
I've run the car in the past with foams at my local outdoor low to med grip track with the formula tuned motor. While the setup is far from perfect, I've been able to run 19.2's and do 18 laps while using tire compound on the rear only. Many of the local racers have been surprised by it's performance as they feel foams are better for this car.
Ran tonight with no changes to the car other then rubber all round, and was able to in the first heat run 19 laps and 18.4' while using tyre grip.
The car was very loose for the first couple of laps, but then ran quite nice after the tire grip came in to play.
In the second heat, I again had trouble in the first handful of laps with rear grip. Was able to run 18.5' and again the car performance ok.
I had hoped to run again without using any additive, but alais, the clouds opened and the night of racing came to an end.
I will next weekend give them another go and try various amounts of additive and make some set-up changes, but the comments from a couple of drivers afterwards was positive to say the least.....a good start in my book.
#1718
RedBullFixx
That looks like a 1s set up?
What size motor?
And how does it perform with the different weight balance?
That looks like a 1s set up?
What size motor?
And how does it perform with the different weight balance?
#1719
Finally was able to have a run with the tamiya rubber tyres for the F104. [...] I will next weekend give them another go and try various amounts of additive and make some set-up changes, but the comments from a couple of drivers afterwards was positive to say the least.....a good start in my book.
I might get more grip with the rubber tires if it's "cold".
#1720
Hy there!
Is it possible to fit a F104 pro Body on a F103?
I think if you only cut out the body (without the sitd cooler parts) the battery should fit.
But fit the front wing?
Greets Blueman
Is it possible to fit a F104 pro Body on a F103?
I think if you only cut out the body (without the sitd cooler parts) the battery should fit.
But fit the front wing?
Greets Blueman
#1721
Tech Fanatic
iTrader: (14)
I'm told had I warmed the tyres up in tyres warmers, that would have helped stop the skating around I got for the first 3-4 laps while the tyre additive kicked in.
#1722
Thanks I will try to locate one.
#1723
Hi,
I wanted to ask if this battery will fit in the car: http://www.rcplanet.com/Reedy_5000mA...o_p/asc709.htm
I wanted to ask if this battery will fit in the car: http://www.rcplanet.com/Reedy_5000mA...o_p/asc709.htm
#1724
#1725
My f104, work in progress, NIGHT RACER