texastc

iTrader: (2)

The new kits ship with shims, contact RSector or whomever you ordered from, they should have the shims.

PDR

iTrader: (31)

Thanks - must have just missed out. What size are they? Might be just as easy to pick some up locally, since the postage might be worth more than the shims...

RedBullFiXX

iTrader: (34)

Try setting your lower A-arm bump stops to limit the movement beyond droop

Vector03cobra

iTrader: (11)

F104 X1 for sale

link
http://www.rctech.net/forum/r-c-item...o-battery.html

PM me if interested, pass it on if you would.

Thanks F1 racers.

eComet

iTrader: (69)

Yes, you have to use the bump stop screw at the arms to prevent the lower ball from popping out, and the thick washer to prevent jamming the steering knuckle to the arm upon impact.

texastc

iTrader: (2)

Thanks will try that.

mapplegate

iTrader: (37)

I just purchased an f104w, I want to change the front end to the alum camber links like everyone else appears to be running, can anyone give me the parts I will need?

Thanks!

sidecarphil1

iTrader: (1)

Hi guys

I am looking for some advice , I am running the ETS set up of tyres this is rubber medium Ride tyres all round , but i am struggling for on power understeer , i have got an F104pro with the soft T bar and the screw removed from the middle hole and using a foam from a shock glued to the T bar ,

middle shock is standard red spring and 300 oil
front is stock , and the middle friction plate has blue corally damper syrup on it , did try diff grease but this made it a little worse , any ideas guys ???

Thanks Phil

MikeR

iTrader: (15)

Hi Gang,

Some new F104 goodies!

http://www.exotekracing.com/f1-adjus...-set-for-f104/

silencery

iTrader: (21)

wow, nice! Are you going to produce the carbon brace that goes from the camber block to the body post too?

texastc

iTrader: (2)

MikeR,
I love you,

Dont sell out before Friday!!!! I gotsta have one!

blade072

iTrader: (98)

with upgrades like these coming out.....ill never get to run my car........they are just too darn pretty to be used...

dfx

Aren't there only 5mm of shims (with stock knuckles)? I believe that the orignal plastic shims are (slightly less than) 2.5mm, 1.5mm and 1mm...

blade072

iTrader: (98)

you are correct.....thats why i went and got some alloy ones...but any 3mm spacer/shim can be used....i got these ones...

http://www.tamiyausa.com/product/ite...oduct-id=53539

MikeR

iTrader: (15)

Will have lots still on friday, not so sure for sat

Yes, bumper braces are finished but just not have had time to market and package them. Maybe late next week.