The Speed Passion Thread
#5807
Tech Adept
I tried to upgrade from the 528 stock to the 508 and a note popped up saying I could not upgrade to that software. Any ideas? Will the SC have the same performance if I set 9 and 12 to setting 1 with the 528 as it would with the 508? I have the GT 2.0 LPF and previously loaded the 528 software using the same computer. Thanks
#5808
#5809
I tried to upgrade from the 528 stock to the 508 and a note popped up saying I could not upgrade to that software. Any ideas? Will the SC have the same performance if I set 9 and 12 to setting 1 with the 528 as it would with the 508? I have the GT 2.0 LPF and previously loaded the 528 software using the same computer. Thanks
Like sosidge stated, try reflashing a again, or try another USB port.
#5810
Tech Regular
Of course is not legal, since there's no blinking led.
#5811
Tech Champion
iTrader: (17)
No...if your track asking for the ROAR no timing rule, you have to run the 508_no_timing software. Even turning off all the setting from 528 down to 1 is still has the advantage over the 508 "somehow"....and you will have a lot of explaining to do if someone is questioning you about the software that you use and where is the blinking light.
I have tried alot of time helping others uploading software from 528STOCK to 508_no_timing without any problem...check your computer, I bet it is the VISTA or Win 7 thing...I used Window XP just so I don't have to deal with all the new bugs.
I have tried alot of time helping others uploading software from 528STOCK to 508_no_timing without any problem...check your computer, I bet it is the VISTA or Win 7 thing...I used Window XP just so I don't have to deal with all the new bugs.
#5812
Tech Champion
iTrader: (17)
Like Blake said...the newer batch should have the USVTA logo on the box and inside the box there should be extra USVTA DECAL for you to place it on the ESC and convert it to USVTA edition club spec ESC.
You can see that at the upcoming I-hobby Expo this weekend.
Last edited by Solara; 10-19-2010 at 09:44 AM.
#5813
Sounds Good... Will there be esc's available at the Ihobby? Cos I will definitely be going and I hope to get ahold of a piece of the Cirtix...
#5814
Tech Adept
No...if your track asking for the ROAR no timing rule, you have to run the 508_no_timing software. Even turning off all the setting from 528 down to 1 is still has the advantage over the 508 "somehow"....and you will have a lot of explaining to do if someone is questioning you about the software that you use and where is the blinking light.
I have tried alot of time helping others uploading software from 528STOCK to 508_no_timing without any problem...check your computer, I bet it is the VISTA or Win 7 thing...I used Window XP just so I don't have to deal with all the new bugs.
I have tried alot of time helping others uploading software from 528STOCK to 508_no_timing without any problem...check your computer, I bet it is the VISTA or Win 7 thing...I used Window XP just so I don't have to deal with all the new bugs.
#5817
Tech Champion
iTrader: (17)
Thanks to everyone for trying to help. I can't even get my LCD to talk to my computer now. I even tried it on my older computer with XP rather than Vista. I think my track will be ok with the 528 with 9 and 12 set to 1 as long as I can confidently tell them that is that is no timing. I think that is what I am still hearing here. Otherwise I'll just go back to using one of my v1.1 LPFs with #9 set to zero degrees.
Hope you can get that connected.........otherwise, blaim STEVE JOB or BILL GATES.
#5818
Tech Champion
iTrader: (17)
We are doing the 2010 I-hobby Expo this week, so everything will be submit sometime next week...and we are hoping the above ESC and software will be legal in NOVEMBER.
#5819
Any ideas when the new 1S range of motors will be available in Europe ??
i would like a 13.5 version for my Tekin powered 1/12th
i would like a 13.5 version for my Tekin powered 1/12th
#5820