The Speed Passion Thread
#4936
Can somebody send me a link to download software for program card and 528 as well. Thx.
#4937
Tech Regular
#4939
#4940
Tech Master
iTrader: (2)
I run an RB5 which has the exact tranny ratio. Running a 78 / 23 for spur -pinion. We have a very small tight cornering track so not much top end needed , but enough for passing. I'm by far the fastest and smoothest for our small straightaways. I can PM u the settings currently used with 528 if youde like. I use the GT 2.1 speedo with 528 Mod program and 4 barrel power cap.
#4941
Tech Addict
iTrader: (17)
Hit a wall (not that hard, I swear!) running a practice session at my local track... Now my beloved GT 2.0 doesn't turn on. Fan turns on, but no lights at the bottom of the ESC like in the past. Anyone have any idea what it could be?
Also, I've been trying to get a hold of the new guy in Illinois, but haven't had any luck via the phone. Need to get this this serviced ASAP.
Anyone know what's up?
Also, I've been trying to get a hold of the new guy in Illinois, but haven't had any luck via the phone. Need to get this this serviced ASAP.
Anyone know what's up?
#4942
Super Moderator
iTrader: (1)
Hit a wall (not that hard, I swear!) running a practice session at my local track... Now my beloved GT 2.0 doesn't turn on. Fan turns on, but no lights at the bottom of the ESC like in the past. Anyone have any idea what it could be?
Also, I've been trying to get a hold of the new guy in Illinois, but haven't had any luck via the phone. Need to get this this serviced ASAP.
Anyone know what's up?
Also, I've been trying to get a hold of the new guy in Illinois, but haven't had any luck via the phone. Need to get this this serviced ASAP.
Anyone know what's up?
RMA VIDEO
It's pretty straight forward and easy to do. THanx.
#4943
Does anyone know the weight on Speed Passion Competition 3.0 17.5R engine?
#4944
Tech Addict
iTrader: (17)
You will need to get an RMA. Here is the link on directions to get this fixed.
RMA VIDEO
It's pretty straight forward and easy to do. THanx.
RMA VIDEO
It's pretty straight forward and easy to do. THanx.
Dear Speed Passion USA... please pick up your phone!!!!!
#4947
Hit a wall (not that hard, I swear!) running a practice session at my local track... Now my beloved GT 2.0 doesn't turn on. Fan turns on, but no lights at the bottom of the ESC like in the past. Anyone have any idea what it could be?
Also, I've been trying to get a hold of the new guy in Illinois, but haven't had any luck via the phone. Need to get this this serviced ASAP.
Anyone know what's up?
Also, I've been trying to get a hold of the new guy in Illinois, but haven't had any luck via the phone. Need to get this this serviced ASAP.
Anyone know what's up?
Sorry for your issue trying to get through to the SP USA office. Albert, the new rep. for US is still in the transition period with setting up the office. If you would like,send me your contact info and I will get a hold of him and get the ball rolling for you. Thank you for your understanding.
Brian
#4948
Hit a wall (not that hard, I swear!) running a practice session at my local track... Now my beloved GT 2.0 doesn't turn on. Fan turns on, but no lights at the bottom of the ESC like in the past. Anyone have any idea what it could be?
Also, I've been trying to get a hold of the new guy in Illinois, but haven't had any luck via the phone. Need to get this this serviced ASAP.
Anyone know what's up?
Also, I've been trying to get a hold of the new guy in Illinois, but haven't had any luck via the phone. Need to get this this serviced ASAP.
Anyone know what's up?
first you need to connect your SPGT2.0 with programming box
and tell me if it's woking,
if it is, then you should be alright,
after that, try to connect with LCD Pro,
if it's ok,
connect both with PC.
and then re flash your Firmware
and DONE!.
#4950
Tech Addict
iTrader: (17)
Hi there,
Sorry for your issue trying to get through to the SP USA office. Albert, the new rep. for US is still in the transition period with setting up the office. If you would like,send me your contact info and I will get a hold of him and get the ball rolling for you. Thank you for your understanding.
Brian
Sorry for your issue trying to get through to the SP USA office. Albert, the new rep. for US is still in the transition period with setting up the office. If you would like,send me your contact info and I will get a hold of him and get the ball rolling for you. Thank you for your understanding.
Brian