The Speed Passion Thread
#2911
Tech Elite
iTrader: (15)
The Supercharger stuff on 10.5 needs to be done very carefully. you can use it, but with most of the settings turned down pretty far.
Are you running in a 10.5t only class? If not, you're better off with the standard software and a faster mod motor. Much less chance of blowing something up.
Are you running in a 10.5t only class? If not, you're better off with the standard software and a faster mod motor. Much less chance of blowing something up.
#2912
Tech Fanatic
iTrader: (18)
Ready Sir!
If Shawn Palmer was busy, there should be representatives from KingGoldenUSA,
who joined and served in this Thread Speed Passion.
My question always remains the same, the problem at ESC FIRMWARE damaged.
Is Speed Passion to Release Software for this problem.
Adam said his name "Re-Flash" be able to return to the ESC back FIRMWARE
to the beginning.
because of the problem, if in turn ESC, ESC will not Boot.
while the green light, stay alive, indicate the ESC is alive.
and PC Interface / Software do not want Displaying "Software" Tab.
So I can not click button "Upgrade".
Shawn Palmer, is there Software Re-Flash to ESC I?
so I can fix it myself just to issue ESC FIRMWARE damaged.
If Shawn Palmer was busy, there should be representatives from KingGoldenUSA,
who joined and served in this Thread Speed Passion.
My question always remains the same, the problem at ESC FIRMWARE damaged.
Is Speed Passion to Release Software for this problem.
Adam said his name "Re-Flash" be able to return to the ESC back FIRMWARE
to the beginning.
because of the problem, if in turn ESC, ESC will not Boot.
while the green light, stay alive, indicate the ESC is alive.
and PC Interface / Software do not want Displaying "Software" Tab.
So I can not click button "Upgrade".
Shawn Palmer, is there Software Re-Flash to ESC I?
so I can fix it myself just to issue ESC FIRMWARE damaged.
wait till they get things set up so that you can send your esc into the US office ,
Send it to the Hong Kong office
Like I said before these are you choices you messed up your esc by mistake now take your lumps. A technician is not going to give you his tricks of the trade if it take him/her out of a repair job...
#2913
#2914
Like I said before, 3 times now to be exact, you cannot do it yourself.
If you live in the US contact [email protected] if not please contact your local distribution channel and have it fixed for you.
If you live in the US contact [email protected] if not please contact your local distribution channel and have it fixed for you.
directly to the CHIP.
http://www.rctech.net/forum/7069238-post2695.html
As i can remember we supposed able to fix damaged firmware on esc,
i see there is only one i know that can do it
Video The Right way method Updating Firmware
Manual The Right way method Updating Firmware
if you see the video completely,
you will see the right way to do Firmware Updating,
every thing on ESC and battery is turned off,
as their simple programming box is read "Er" which mean read error from ESC.
That's mean Updating/Upgrading Fimware process
does not required the esc to boot/startup first,
where Speed Passion ESC must boot/switch on to do Upgrade/Update firmware on esc.
another way they do is the plug Throught Switch button,
where the process is required for the new firmware.
This is The idea, for Shawn Palmer and Speed Passion,
Speed Passion Professional firmware/software can't do it,
So There must be the new way maybe on Firmware/software for LCD Professional, to do it.
If these we can do it To the ESC, then there is no more fear
doing The Firmware Updates/Upgrades if Firmware Damaged is happen.
Hope my Dig deep will Help everyone running Today and the Future ESC.
Hope Speed Passion will respond immediately.
#2915
R/C Tech Elite Member
iTrader: (37)
I Saw, TeamWave can Fix The ESC Firmware , while the ESC is all turned off
directly to the CHIP.
http://www.rctech.net/forum/7069238-post2695.html
well thought that too,
As i can remember we supposed able to fix damaged firmware on esc,
i see there is only one i know that can do it
Video The Right way method Updating Firmware
Manual The Right way method Updating Firmware
if you see the video completely,
you will see the right way to do Firmware Updating,
every thing on ESC and battery is turned off,
as their simple programming box is read "Er" which mean read error from ESC.
That's mean Updating/Upgrading Fimware process
does not required the esc to boot/startup first,
where Speed Passion ESC must boot/switch on to do Upgrade/Update firmware on esc.
another way they do is the plug Throught Switch button,
where the process is required for the new firmware.
This is The idea, for Shawn Palmer and Speed Passion,
Speed Passion Professional firmware/software can't do it,
So There must be the new way maybe on Firmware/software for LCD Professional, to do it.
If these we can do it To the ESC, then there is no more fear
doing The Firmware Updates/Upgrades if Firmware Damaged is happen.
Hope my Dig deep will Help everyone running Today and the Future ESC.
Hope Speed Passion will respond immediately.
directly to the CHIP.
http://www.rctech.net/forum/7069238-post2695.html
well thought that too,
As i can remember we supposed able to fix damaged firmware on esc,
i see there is only one i know that can do it
Video The Right way method Updating Firmware
Manual The Right way method Updating Firmware
if you see the video completely,
you will see the right way to do Firmware Updating,
every thing on ESC and battery is turned off,
as their simple programming box is read "Er" which mean read error from ESC.
That's mean Updating/Upgrading Fimware process
does not required the esc to boot/startup first,
where Speed Passion ESC must boot/switch on to do Upgrade/Update firmware on esc.
another way they do is the plug Throught Switch button,
where the process is required for the new firmware.
This is The idea, for Shawn Palmer and Speed Passion,
Speed Passion Professional firmware/software can't do it,
So There must be the new way maybe on Firmware/software for LCD Professional, to do it.
If these we can do it To the ESC, then there is no more fear
doing The Firmware Updates/Upgrades if Firmware Damaged is happen.
Hope my Dig deep will Help everyone running Today and the Future ESC.
Hope Speed Passion will respond immediately.
#2917
#2924
Hi irgo,
My apologies if I an mistaken, but as I understand it, you have either:
A) Installed another brand of software (HobbyWing, Tekin, LRP) onto your Speed Passion ESC.
or
B) Disconnected your ESC during a PC Speed Passion software update.
Either way, unfortunately the outcome is the same and the repair process is the same:
The USA office does not have reflashing/ESC processor replacement capabilities. That Speed Passion ESC will need to be sent to our Hong Kong headquarters. Please email Mr Benny at: [email protected] for RMA and shipping instructions.
My apologies if I an mistaken, but as I understand it, you have either:
A) Installed another brand of software (HobbyWing, Tekin, LRP) onto your Speed Passion ESC.
or
B) Disconnected your ESC during a PC Speed Passion software update.
Either way, unfortunately the outcome is the same and the repair process is the same:
The USA office does not have reflashing/ESC processor replacement capabilities. That Speed Passion ESC will need to be sent to our Hong Kong headquarters. Please email Mr Benny at: [email protected] for RMA and shipping instructions.
#2925
defcone:
The Supercharger software should be out for public beta soon. BUT - as before, please be careful with the settings, as this new software can overdrive and overheat a 10.5 quite easily.
Speed Passion Mac capability - I'll check on that and have an answer soon. There were no plans for it the last time Schumacher USA inquired, but you never know.
The Supercharger software should be out for public beta soon. BUT - as before, please be careful with the settings, as this new software can overdrive and overheat a 10.5 quite easily.
Speed Passion Mac capability - I'll check on that and have an answer soon. There were no plans for it the last time Schumacher USA inquired, but you never know.