57LikesThe Speed Passion Thread
10-06-2009, 01:00 AM
#886
Use the highest profile and leave the timing in the middle. Start with ratio about 5.5 and go up one tooth at a time until you get the best balance.
10-06-2009, 06:17 AM
#887
Rocky- I leave the speed control switch off and only use the smart-booster's switch. Dang man... you guys aren't gonna give me a flying chance up there are you? Now your in 12th scale, I have no-where to go.....Maybe WGT??
Talk to you later bud!
Talk to you later bud!
10-06-2009, 02:14 PM
#888
Tech Fanatic
iTrader: (38)
Join Date: Jul 2007
Location: Somewhere between raising hell and Amazing Grace
Posts: 761
Trader Rating: 38 (100%+)
-rocky b
10-07-2009, 03:58 PM
#890
my speed passion GT 2.0 LPF speed controller came today and when I opened it it looked like it has been used before
the bottom had smudges and the sticker looks crooked
anyone esc's come like this?
the bottom had smudges and the sticker looks crooked
anyone esc's come like this?
10-07-2009, 04:06 PM
#891
LOL the 1/12 is just for kicks, I'm sticking to 13.5 TC for points events! Can anyone confirm that the speedo's lipo cutoff will/won't work with the ESC switch off? An 8-minute race isn't enough to drain it I know but I have a tendency to lose track of how long I've been running during practice!
-rocky b
-rocky b
10-07-2009, 06:01 PM
#892
Kriis----My last GT pro had the sticker crooked too.
10-07-2009, 06:36 PM
#893
Is it possible to send in a 1.1 and have it updated to 2.0? If so does anyone have an idea as to what the cost is? Also would it even be worth the update just running stock sedan?
10-07-2009, 07:03 PM
#894
10-07-2009, 10:56 PM
#895
Tech Adept
Updated Software
Is There perhaps newer software than the 323, and 312 ? , i have tried both and still get lamb basted by the tekins, spx, and bmc 1.5 
, i am running a 13.5 ballistic, with std timing on the motor, full on the speedo, with an FDR of 4.5. speedo is a gt 2.0 lpf, The other speedo's easily pull me by 2-3 feet on the straight.
, i am running a 13.5 ballistic, with std timing on the motor, full on the speedo, with an FDR of 4.5. speedo is a gt 2.0 lpf, The other speedo's easily pull me by 2-3 feet on the straight.
10-08-2009, 01:49 AM
#898
10-08-2009, 04:28 AM
#900
Is There perhaps newer software than the 323, and 312 ? , i have tried both and still get lamb basted by the tekins, spx, and bmc 1.5 , i am running a 13.5 ballistic, with std timing on the motor, full on the speedo, with an FDR of 4.5. speedo is a gt 2.0 lpf, The other speedo's easily pull me by 2-3 feet on the straight.
, i am running a 13.5 ballistic, with std timing on the motor, full on the speedo, with an FDR of 4.5. speedo is a gt 2.0 lpf, The other speedo's easily pull me by 2-3 feet on the straight.