The Speed Passion Thread
#556
R/C Tech Elite Member
iTrader: (37)
for 1/12 it will be a 17.5 motor if I try the class.
I just want to make sure I don't forget to do something if I try this whole 1S lipo thing and screw up my lipo or ESC. So if anyone has an overview for a noob when it comes to 1/12 1S lipo feel free to post. something that really breaks it down (ie- get this, and this, hook this up this way, set this, etc.)
I just want to make sure I don't forget to do something if I try this whole 1S lipo thing and screw up my lipo or ESC. So if anyone has an overview for a noob when it comes to 1/12 1S lipo feel free to post. something that really breaks it down (ie- get this, and this, hook this up this way, set this, etc.)
As for the setup and what not I found it easier to hook your esc up to the battery, and motor, do you ESC calibration, THEN wire up the Novak booster.
The booster eliminates the need for the ESC on/off switch so that just removes any or all of that confusion.
I highly advise NOT cutting off your esc on/off switch because, well umm you figure it out lol
#557
Tech Legend
iTrader: (294)
The switch on the GT 2.0 has the setup button on it like the Silver Arrow 1/8 ESC correct? If so, makes sense then not to cut it off.
Looking forward to some pics of 1S setups.
Is there software on the way or already out for the GT 2.0's to compete with that Tekin RS boost feature?
Looking forward to some pics of 1S setups.
Is there software on the way or already out for the GT 2.0's to compete with that Tekin RS boost feature?
#558
R/C Tech Elite Member
iTrader: (37)
The switch on the GT 2.0 has the setup button on it like the Silver Arrow 1/8 ESC correct? If so, makes sense then not to cut it off.
Looking forward to some pics of 1S setups.
Is there software on the way or already out for the GT 2.0's to compete with that Tekin RS boost feature?
Looking forward to some pics of 1S setups.
Is there software on the way or already out for the GT 2.0's to compete with that Tekin RS boost feature?
#563
Cain:
The "extra top end" software has already been in the 2.0s since they were released :-)
The "extra top end" software has already been in the 2.0s since they were released :-)
#564
Shawn i have a problem , the speed control in the end is not working properly.
Except the fact that the sound dosnt work , when i put the sensor cable at the speed contol the motor dosnt work.
I have to turn the motor a bit and it will work but when i stop it i will not start again.
Without the sensor cable the motor is working but with the sensor cable on its not working properly.
When i move the cable a bit it will work for a while but stop again.
Its not the cable for sure , i tried 2 of them and dosnt work and 2 motors ( speed passion 4t and lrp x11 4t)
What can we do , can i send it somewhere to check it?
My problem is that i live in Greece , can i send it to you or to uk office?
Thanks
Except the fact that the sound dosnt work , when i put the sensor cable at the speed contol the motor dosnt work.
I have to turn the motor a bit and it will work but when i stop it i will not start again.
Without the sensor cable the motor is working but with the sensor cable on its not working properly.
When i move the cable a bit it will work for a while but stop again.
Its not the cable for sure , i tried 2 of them and dosnt work and 2 motors ( speed passion 4t and lrp x11 4t)
What can we do , can i send it somewhere to check it?
My problem is that i live in Greece , can i send it to you or to uk office?
Thanks
#565
Speed Passion GT2.0
Hi Adam,
on program box
1.Running Mode what is the difference between value 2 and 3 ?
on program box
1.Running Mode what is the difference between value 2 and 3 ?
#566
Tech Fanatic