Solara

iTrader: (17)

Can you contact the Australia SP distributor? They should have some...

Solara

iTrader: (17)

I personally never seen anyone did that since the brushed motor period......and I know if that works, other will do that long time ago. But so far, no one use those MM freezer thing on the BL motor....at least not here in mid-west when we have snow now...lol

mattwoodcraft

iTrader: (10)

kool, i was wondering whether i should get one to try in the hotter parts of the year the ambiant temp of the motor sits around 30-35 degrees.
atleast you didnt say not a good idea
hope it turns up next week befor i go racing

Drillit

The coolers will work fine, if you don't mind a little condensation (water) on your sensor/circuit boards.

Oh, wait, in the early days of brushless, "they" said never use them! Now what to do?

LOSI123

iTrader: (63)

I was after a opinion as to weather or not i will notice any improvment in punch or top speed in running the cirtix club race esc V's the SP 2.1 ProStock in blinky mode, all other things unchanged, 17.5 turn TC

mattwoodcraft

iTrader: (10)

would the amp draw between the 2 be different maybe you would get more punch using the GT2.1 out of corners

Manson

I ve got a gt2.0 with 323 soft

What mean the value when you use the custom lipo cut off ?
Overal voltage or the 1s voltage like the stock cut off value

Thanks

sidecarphil1

iTrader: (1)

it is per cell matey

syrss

iTrader: (3)

Can anyone at Speedpassion please assist me? I need a RMA number issued for my defective motor, and I was doing online chatting with their tech support, after chatting for a while and the tech support just stopped responding even though his status is showing online.

Tried calling the USA toll free number and it tells me to press 0, and it went no where.

TIA,
Ron

lethallee69

iTrader: (17)

Hi all ,
looking for FDR and settings to suit SP MMM 13.5 boosted on an ashpalt track around 160mtrs in length. Track has a back straght of around 45 mtrs long and incorporates a combination of tight and open sections
using SP GT2.0 with 323 firmware.
thanks, Lee

Solara

iTrader: (17)

Ron, please call our office again....we were seeing you on the chat room, and get disconnected and never see you back online afterall...I am sure it is somethingw wrong on our side of network, but please give us a call and Albert can take care of your V3 US BL motor...

Solara

iTrader: (17)

Check here yet?

http://www.speedpassion.net/us/escsetup.asp

LOSI123

iTrader: (63)

Solara:
do speed passion offer any free or discounted upgrade for the people who have the first version of the cirtix club race esc that dont work with the LRP motors.

Can the software be updated?


from the first part of the manual


Features:
This Cirtix ESC is suitable for 1/10 1/12 cars and 1/10 trucks and 1/8 on and off road
◆
Compatible with all sensored and sensorless brushless motors,
◆
Built in ESC enhancement feature will allow updates to the latest DRRS Version 2.0 software and future new software developments. (Cirtix ESC PC-USB adaptor “PN#SPESCPB01” is sold seperately, please contact your local dealer or distributor for more information). Please visit www.speedpassion.net to look for new updated software and features for your Cirtix series ESC.

Solara

iTrader: (17)

Sorry, that 1st batch of the ESC is almost like 2 years old. You can try contact your Australia distributor and see they are willing to offer you a discounted upgrade (no garrantee they would). There will be no update on that ESC.

lethallee69

iTrader: (17)

No SP MMM 13.5 TC setup on there