R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 08-07-2013, 11:12 AM   #11896
Tech Fanatic
 
b20btec's Avatar
 
Join Date: Oct 2011
Location: Sugar Land
Posts: 918
Trader Rating: 10 (100%+)
Default

Quote:
Originally Posted by Xpress View Post
The increased timing and numerically higher fdr will mellow the bottom end of the motor.
got it thanks, i'm fixing to order the timing board right now.
b20btec is offline   Reply With Quote
Old 08-07-2013, 09:58 PM   #11897
Tech Master
 
EDWARD2003's Avatar
 
Join Date: Jan 2003
Location: Kagoshima, Japan
Posts: 1,919
Trader Rating: 6 (100%+)
Default

My speed passion MMM 21.5 armature has a lot of side to side movement. Is this normal?

Compared to other motors I have, they only have a "tick" of movement..
EDWARD2003 is offline   Reply With Quote
Old 08-08-2013, 12:01 AM   #11898
Tech Initiate
 
weavz's Avatar
 
Join Date: Jun 2013
Location: Northern Beaches,Sydney
Posts: 33
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by SP CS View Post
Hello Sean,

Please forward any info or email to USA@kinggoldenltd.com, and we will direct you to our Asia division for service.

Thank you
SP USA
Thanks, email sent.
hopefully this gets me some where
__________________
Durango DEX410-Tresrey 7.5r-Nosram Comet HD//AE RC10 B4.1-Hobbywing// TLR 22SCT-Nosram Pure Evo 10.5T-Nosram Comet HD//Losi Mini 8ight-Losi 4500Kv-Losi MSC188LHP//
Associated RC18T-Leopard 7500Kv-Leopard Speedy//Traxxas Nitro Stampede
weavz is offline   Reply With Quote
Old 08-08-2013, 02:14 AM   #11899
Tech Initiate
 
F1Junky's Avatar
 
Join Date: Dec 2012
Location: Chicago, Il
Posts: 35
Default

When will speed passion be releasing the LMP bodies? I heard that there is a possibility it will be released in oct.
__________________
VTA - Xray T2 06 - Novak 25.5
USGT- X-ray T4 13 - Novak 21.5
F1 - Exotek F1R custom work from F1paintlabs
Novak 21.5 Crawler
Speedpassion SP1 - Vulcan 21.5
F1Junky is offline   Reply With Quote
Old 08-08-2013, 03:24 PM   #11900
Tech Rookie
 
eminjohn's Avatar
 
Join Date: Apr 2013
Location: Turkey
Posts: 12
Default

hello i have problem;

i have reventon - r esc i wanted to upgrade firmware i pluged esc to pc everything was ok then i selected drift program it was loading but it stucked at %21 thats why i closed program and esc dont work anymore leds not working and i cannot program and pc cannot see esc what should i do ? please help..

regards..
__________________
- Hpi Vorza
- Yokomo DIB - ReventonR & SP 10.5 - Savox 1251mg
- Sanwa MT4
eminjohn is offline   Reply With Quote
Old 08-10-2013, 02:36 AM   #11901
Tech Addict
 
G-rem's Avatar
 
Join Date: Apr 2011
Location: Belgium
Posts: 610
Trader Rating: 2 (100%+)
Default

Hi everyone,

I tried to put MuchMore soft in my Speed Passion Reventon Pro and it seems to work properly. But my LCD Program Card can't be used with MuchMore softs (any items can be read).

How do you do guys to upgrade your SP LCD Program Card with the Muchmore one?

And how do you do to put back SP softs in the esc after having put MuchMore one?

Thanks for help,
G-rem
G-rem is offline   Reply With Quote
Old 08-10-2013, 07:55 AM   #11902
Tech Fanatic
 
Join Date: Jul 2010
Location: Antwerp, Belgium
Posts: 869
Default

I just purchased the reventon pro (not the 1.1 version) in a combo deal with a 8.5T V3 motor. Is the reventon a good esc for switching between modified and blinky stock software?

Last edited by addicted2blue; 08-10-2013 at 08:09 AM.
addicted2blue is offline   Reply With Quote
Old 08-10-2013, 11:35 AM   #11903
Tech Master
 
cwoods34's Avatar
 
Join Date: May 2008
Location: Indy-freakin'-ana
Posts: 1,152
Trader Rating: 9 (100%+)
Default

Quote:
Originally Posted by addicted2blue View Post
I just purchased the reventon pro (not the 1.1 version) in a combo deal with a 8.5T V3 motor. Is the reventon a good esc for switching between modified and blinky stock software?
Yes. I've been running the same Reventon Pro for a year now in everything from 17.5 blinky to 4.0 boosted. As long as you properly download and install the software, you can literally switch software profiles in the time it takes to boot up the computer and make about 5 mouseclicks.
__________________
Stop holding bitterness deep in your bum soul.
cwoods34 is offline   Reply With Quote
Old 08-10-2013, 01:36 PM   #11904
Tech Fanatic
 
Join Date: Jul 2010
Location: Antwerp, Belgium
Posts: 869
Default

Quote:
Originally Posted by cwoods34 View Post
Yes. I've been running the same Reventon Pro for a year now in everything from 17.5 blinky to 4.0 boosted. As long as you properly download and install the software, you can literally switch software profiles in the time it takes to boot up the computer and make about 5 mouseclicks.
Thx for the reply.
I look forward to test the esc with the 8.5t motor and with some stock motors.
addicted2blue is offline   Reply With Quote
Old 08-10-2013, 03:52 PM   #11905
Tech Rookie
 
eminjohn's Avatar
 
Join Date: Apr 2013
Location: Turkey
Posts: 12
Default

guys will someone help me ? i have reventon r esc leds not working and pc and program card does not work is it trash or can i save my esc ?
__________________
- Hpi Vorza
- Yokomo DIB - ReventonR & SP 10.5 - Savox 1251mg
- Sanwa MT4
eminjohn is offline   Reply With Quote
Old 08-11-2013, 03:39 AM   #11906
Tech Regular
 
Fredp1's Avatar
 
Join Date: Mar 2013
Location: Sydney, Australia
Posts: 321
Trader Rating: 11 (100%+)
Default Wiring diagram- between Motor Sensor wire and Smart LCD Program Box

I have a short course truck with the esc/receiver wire difficult to access.

One of the team drivers told me instead of unplugging the receiver wire from the esc, then plugging a wire between the esc receiver pins and the smart lcd program box, you can connect the Smart LCD Program box to the wire that plugs into the Motor Sensor port.
The 'pro' gave me a cable he uses that fits the motor sensor cable and the lcd program box, but its not working.

I have tried it on a GT2.0 and a Pro esc.

Is this possible with a SP ESC or is this possible with other brands only?

Does anyone have a wiring diagram to confirm my cable is wired correctly?

Thanks
Fred
Fredp1 is offline   Reply With Quote
Old 08-11-2013, 08:10 PM   #11907
Tech Adept
 
jdawg81's Avatar
 
Join Date: Jan 2012
Location: Vancouver, BC
Posts: 166
Trader Rating: 1 (100%+)
Default Best rotor for 17.5MMM

I'm thinking of upgrading the rotor for my 17.5MMM but I'm not sure which one to get. Is there a rotor that will give more torque/power and speed?
jdawg81 is offline   Reply With Quote
Old 08-12-2013, 06:18 AM   #11908
Tech Rookie
 
Join Date: May 2013
Location: Ukraine
Posts: 5
Default

Bigger rotor give to you more torque, but it also increase motor temp.
Catharsis_UA is offline   Reply With Quote
Old 08-13-2013, 12:02 AM   #11909
Tech Rookie
 
Join Date: May 2011
Location: Hungary
Posts: 19
Default

Quote:
Originally Posted by eminjohn View Post
hello i have problem;

i have reventon - r esc i wanted to upgrade firmware i pluged esc to pc everything was ok then i selected drift program it was loading but it stucked at %21 thats why i closed program and esc dont work anymore leds not working and i cannot program and pc cannot see esc what should i do ? please help..

regards..
Do you have LCD program card? The older one, the LED program card isn't suitable for the latest firmware. However, think you need first refresh the firmware into the program card. good luck
Zavo66 is offline   Reply With Quote
Old 08-13-2013, 10:35 AM   #11910
Tech Initiate
 
Join Date: Oct 2012
Posts: 45
Default

Hello,

Restart your computer and make sure no other program is running. Start interface program and plug in the program card with the ESC. Click 'S' on the keyboard to enter safe mode and process to Firmware recover update.

SP CS

Quote:
Originally Posted by eminjohn View Post
hello i have problem;

i have reventon - r esc i wanted to upgrade firmware i pluged esc to pc everything was ok then i selected drift program it was loading but it stucked at %21 thats why i closed program and esc dont work anymore leds not working and i cannot program and pc cannot see esc what should i do ? please help..

regards..
__________________
Speed Passion Customer Service 1-888-928-1328 usa@kinggoldenltd.com
SP CS is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Speed Passion GT Competition Brushless ESC v2.0 Low Profile, LPF pink_sleeve Electric On-Road 13 07-08-2009 10:17 AM


Tags
gt2, lack of help, overpriced, poor customer service, reventon, reventon pro, speed passion


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 10:52 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0