The Speed Passion Thread
Tech Apprentice
Tech Apprentice
As i wrote i had the same problem. As i now tryed to start the program as administrator it worked flawless. So try that
I updated the esc with stock1. The programbox with 2.7. At the track i had the problem my esc didnt do anything anymore. So make sure u test it. The esc didnt want to start up anymore. After putting the 2.4firmware into the programbox it worked fine again. All setting also the hybribboost work great.
This esc is a monster !
I updated the esc with stock1. The programbox with 2.7. At the track i had the problem my esc didnt do anything anymore. So make sure u test it. The esc didnt want to start up anymore. After putting the 2.4firmware into the programbox it worked fine again. All setting also the hybribboost work great.
This esc is a monster !
Do you have update the ESC firmware again after update the program card to V2.4? The stock1 firmware is V20?
Tech Apprentice
Download link: http://www.speedpassion.net/en/download.asp
Video link: http://www.speedpassion.net/en/video.asp?c=2
Follow the video instruction to install the PC program and update ESC firmware.
Reventon Pro should be work on Novak 17.5 motor. If the ESC is stop suddenly when running, refer speed passion website about motor temperature problem. http://www.speedpassion.net/files/So...eventonPro.pdf
Last edited by WMGary; 06-11-2013 at 02:55 AM.
Tech Regular
iTrader: (20)
Ran my Reventon Pro Over the weekend in modified Touring Car.
My car did some of the quickest laps with Stock1 V20 firmware w/4.5t, No problems.......ESC ran awesome! Thanks Albert!!!
My car did some of the quickest laps with Stock1 V20 firmware w/4.5t, No problems.......ESC ran awesome! Thanks Albert!!!
Tech Adept
Reventon Pro
I updated my Reventon Pro to the latest Fleta 4 stock1 software and now cannot do any settings via the speed passion program box, only via the pc interface on the fleta software. I tried to revert back to the speed passion software but it does not support the files installed on the esc.
Any ideas how to flash the esc to speed passion software as I would like to do setup changes via program box at the track.
Any ideas how to flash the esc to speed passion software as I would like to do setup changes via program box at the track.
Tech Initiate
Tech Initiate
I updated my Reventon Pro to the latest Fleta 4 stock1 software and now cannot do any settings via the speed passion program box, only via the pc interface on the fleta software. I tried to revert back to the speed passion software but it does not support the files installed on the esc.
Any ideas how to flash the esc to speed passion software as I would like to do setup changes via program box at the track.
Any ideas how to flash the esc to speed passion software as I would like to do setup changes via program box at the track.
http://imageshack.us/a/img849/5051/cimg0228j.jpg
Regards,
Download Reventon PC program from Speed Passion website. File name is "Reventon PC Program with USB Driver V1.1.0.22".
Download link: http://www.speedpassion.net/en/download.asp
Video link: http://www.speedpassion.net/en/video.asp?c=2
Follow the video instruction to install the PC program and update ESC firmware.
Reventon Pro should be work on Novak 17.5 motor. If the ESC is stop suddenly when running, refer speed passion website about motor temperature problem. http://www.speedpassion.net/files/So...eventonPro.pdf
Download link: http://www.speedpassion.net/en/download.asp
Video link: http://www.speedpassion.net/en/video.asp?c=2
Follow the video instruction to install the PC program and update ESC firmware.
Reventon Pro should be work on Novak 17.5 motor. If the ESC is stop suddenly when running, refer speed passion website about motor temperature problem. http://www.speedpassion.net/files/So...eventonPro.pdf
WMGary, thanks!
Tech Adept
Hi there, you have to put the Fleta softwear at Reventon box.
http://imageshack.us/a/img849/5051/cimg0228j.jpg
Regards,
http://imageshack.us/a/img849/5051/cimg0228j.jpg
Regards,
Can you explain how to update box to fleta software ?
I tried to update the box via the fleta software as per the manual by pressing the reset button while attaching the usb cable to pc. The screen opens with no option to update firmware..
Last edited by 2Quick; 06-12-2013 at 05:48 AM.
Tech Rookie
ok so I ordered the LED Program Card. I dont race, just bash with some friends so I didnt feel like I needed any thing fancy. It should be here tomorrow. Is there anything I need to know or is it pretty user friendly?
Tech Adept
Easy as mate. It comes with some settting cards ( stickers ) with the settings your after.
Tech Initiate
I too have the same problem. Can anyone help. Thank you.
Tech Initiate
You have to go to MuchMore Fleta /assets folder and copy all the files to Reventon 1.1.0/assets folder. Then open Reventon Program, connected the box clicking the bottom them chose 1.4 from MuchMore.
Tech Rookie
got the LCD card. Updated firmware and now I'm all set!
Tech Initiate
Some times wen i turn Reventon box gives me this error:
CHECK SUM P:4AEE
F:CC4D ID:1A0000
Any teck help????
Thxs
CHECK SUM P:4AEE
F:CC4D ID:1A0000
Any teck help????
Thxs