Originally Posted by onekiwi

OK so its not the cheaper box that is included its the proper one that you had to buy separately before

I think I might be getting 2 different esc mixed up DOH!!

Originally Posted by onekiwi

OK so its not the cheaper box that is included its the proper one that you had to buy separately before

I think I might be getting 2 different esc mixed up DOH!!

Originally Posted by rosey1990

Has there been a release date announced for the boost software? I blew my speedo up in the rain today, and I was hoping to replace it with the Reventon Pro. I need the boosted software by 3 weeks from now, how likely is it that it will be released in that time frame?

Originally Posted by trickedout

Reventon pro is in stock in USA warehouse with a price update, go check it out also sounding like an October release on boost profiles...hopefully the first part of October.

Originally Posted by Slayer1904

This is really unfortunate but a 2nd reventon pro is having this same issue with me.

I soldered up another new one, went out and raced a race with it. It worked just fine.

Brought it home after the race was over went to take it out of the default mod 0 program to put into stock mode and again i've lost everything but steering.

I tried returning the ESC back to Mod 0 and now again I get nothing, just steering.

I've been programming esc's with castle links hot wires everything and have never ever had an issue.

I've calibrated after program changes, turned off both turned them back on DONE EVERYTHING and I get nothing.

I consider myself RC savvy and computer savvy and have very good common sense if I thought that changing programs was going to stop the esc from working I would have never tried. But we're required to have our esc's in blink mode to race.

Originally Posted by NolanP

I have a GT 2.0 Pro the I switched over to from the Hobbywing V3. It was a lot faster using boost from the GT Pro than the V3. The only way this thing is coming out of my car is...the Reventon Pro. I can't wait.

Originally Posted by Cain

any tips on timing board selection for stock 17.5 blinky for 1/12 and touring Solara?

Also, what advantage to do I get by going to a revention R versus the GT2.0 LPF in blinky touring? The BEC appears to be better in the GT2.0 LPF versus the revention R?

Originally Posted by Solara

Come on...I am trying to save you money by not breaking your BD7, you saw the aftermath of my Schumacher after the Stock1 with 4T motor...I bet your YOKOMO parts are 3X more expensive then my Schumacher.

I will get your account setup....

Originally Posted by trickedout

Hey Howard, with the release of boost timing for mod coming shortly, what is there to stop someone from using it on say 17.5 and what would be the problems if they did.

Originally Posted by Solara

Reventon R has better brakes and smaller footprint then LPF....the output should be very similar as they are BLINKY.

You are running indoor carpet track..? How big..? Please specify...

Originally Posted by Cain

Two tracks, one is 50 x 50, the other is probably 60 x 80 possibly, maybe longer.

Thanks for any help you can give. Want to order the timing boards to try, just don't want to have a bunch laying around that don't get used lol.

Also, how much of an advantage do you see using the 1 cell 17.5 versus the stock 17.5 for the Competition V3.0 motors?

Originally Posted by Solara

12th scale...I know you need to run the sivler red 12.5mm rotor...but not sure about roll out...you can ask around and use the general roll out for blinky 17.5

For TC...32* timing (full left, yellow board)...gear at 4.6 and check motor temp...and that is for MMM 17.5 and you should also stock the GREEN BOARD just incase motor temp is too high (when using yellow board)...

1cell 17.5 is definitely faster/better then the regular V3 comp....MMM 17.5 is the best, and it is base off the 1cell 17.5 years ago.