The Speed Passion Thread
#9722
Tech Fanatic
iTrader: (2)
thanks for the reply
I know the product has the market appeal but without this endorsement its not going to get it market share
YES i thought some KPI might wake up marketing
all the best
#9723
Tech Elite
Maybe approval is pending due to some software issues. When I wanted to order the Reventon R around here, I was asked to wait a little or go for the GT2.0 Pro instead.
Will there be a bug fix soon? Running a non-boosted 13.5 in my B-Max2 is starting to get boring, and I really want another SP ESC. However, I've started contemplating other ESCs, too...
Is the Cirtix Stock capable of handling a 6.5 Turn for about 7 Minutes in a 2WD/4WD buggy with enabled overheat protection? That might be an interim solution...
Will there be a bug fix soon? Running a non-boosted 13.5 in my B-Max2 is starting to get boring, and I really want another SP ESC. However, I've started contemplating other ESCs, too...
Is the Cirtix Stock capable of handling a 6.5 Turn for about 7 Minutes in a 2WD/4WD buggy with enabled overheat protection? That might be an interim solution...
#9724
Tech Regular
iTrader: (8)
blinky
help
gt2 pro (going from memory) and have got 508 loaded and card confirms this but no red blink ??
am i doing something wrong or is led just stuffed or is it hard to see underneath.
other car set the same is ok
can get away with for club stuff but maybe not for higher events.
gt2 pro (going from memory) and have got 508 loaded and card confirms this but no red blink ??
am i doing something wrong or is led just stuffed or is it hard to see underneath.
other car set the same is ok
can get away with for club stuff but maybe not for higher events.
#9725
Tech Champion
iTrader: (17)
does seem a bit odd though...hw v3 came out after reventon and is alreadyy aproved acording to their forum
I know the product has the market appeal but without this endorsement its not going to get it market share
YES i thought some KPI might wake up marketing
all the best
I know the product has the market appeal but without this endorsement its not going to get it market share
YES i thought some KPI might wake up marketing
all the best
But I don't know why they are not simply list the STOCK0 software with Reventon S ESC only for now....it must be their system that I don't really know.
#9726
Tech Champion
iTrader: (17)
Maybe approval is pending due to some software issues. When I wanted to order the Reventon R around here, I was asked to wait a little or go for the GT2.0 Pro instead.
Will there be a bug fix soon? Running a non-boosted 13.5 in my B-Max2 is starting to get boring, and I really want another SP ESC. However, I've started contemplating other ESCs, too...
Is the Cirtix Stock capable of handling a 6.5 Turn for about 7 Minutes in a 2WD/4WD buggy with enabled overheat protection? That might be an interim solution...
Will there be a bug fix soon? Running a non-boosted 13.5 in my B-Max2 is starting to get boring, and I really want another SP ESC. However, I've started contemplating other ESCs, too...
Is the Cirtix Stock capable of handling a 6.5 Turn for about 7 Minutes in a 2WD/4WD buggy with enabled overheat protection? That might be an interim solution...
Don't bother about running that setup on Cirtix, it won't work....
#9727
Tech Champion
iTrader: (17)
help
gt2 pro (going from memory) and have got 508 loaded and card confirms this but no red blink ??
am i doing something wrong or is led just stuffed or is it hard to see underneath.
other car set the same is ok
can get away with for club stuff but maybe not for higher events.
gt2 pro (going from memory) and have got 508 loaded and card confirms this but no red blink ??
am i doing something wrong or is led just stuffed or is it hard to see underneath.
other car set the same is ok
can get away with for club stuff but maybe not for higher events.
That happened to alot of the ppl....for the new ESC, after calibrate, it will turn off by itself.
#9728
Tech Elite
Thanks for the quick reply! I'll probably get a 9.5 turn in this case...
Last edited by mes; 07-25-2012 at 01:33 PM.
#9729
Tech Fanatic
iTrader: (2)
i need the R
The other way to say is...the STOCK0 (blinky) software that we are going to use on REVENTON series ESC, we have to have ALL of the ESC available to sell publicly in order for them to list it. We are selling the REVENTON S, but not the R and the REVENTON PRO....and that might be the reason.
But I don't know why they are not simply list the STOCK0 software with Reventon S ESC only for now....it must be their system that I don't really know.
But I don't know why they are not simply list the STOCK0 software with Reventon S ESC only for now....it must be their system that I don't really know.
bigger tracks id run stock to avoid going to sleep during a race as the straights go on forever so i need one that can do both
stock overhere runs timing and boost in the 17.5 class
The products looksa ver cool
thanks for your reply
#9730
Tech Regular
iTrader: (8)
blinky
Quote:
Originally Posted by hotrod1933
help
gt2 pro (going from memory) and have got 508 loaded and card confirms this but no red blink ??
am i doing something wrong or is led just stuffed or is it hard to see underneath.
other car set the same is ok
can get away with for club stuff but maybe not for higher events.
After loading the software onto the ESC, you must TURN OFF everything (radio and esc) and turn back on, and do the calibration with radio, then turn everything off again...then turn back on.
That happened to alot of the ppl....for the new ESC, after calibrate, it will turn off by itself.
tried that but still no led at all.
makes all the beep beep when setting endpoints but no led must be dead led
Originally Posted by hotrod1933
help
gt2 pro (going from memory) and have got 508 loaded and card confirms this but no red blink ??
am i doing something wrong or is led just stuffed or is it hard to see underneath.
other car set the same is ok
can get away with for club stuff but maybe not for higher events.
After loading the software onto the ESC, you must TURN OFF everything (radio and esc) and turn back on, and do the calibration with radio, then turn everything off again...then turn back on.
That happened to alot of the ppl....for the new ESC, after calibrate, it will turn off by itself.
tried that but still no led at all.
makes all the beep beep when setting endpoints but no led must be dead led
#9731
Tech Champion
iTrader: (17)
Quote:
Originally Posted by hotrod1933
help
gt2 pro (going from memory) and have got 508 loaded and card confirms this but no red blink ??
am i doing something wrong or is led just stuffed or is it hard to see underneath.
other car set the same is ok
can get away with for club stuff but maybe not for higher events.
After loading the software onto the ESC, you must TURN OFF everything (radio and esc) and turn back on, and do the calibration with radio, then turn everything off again...then turn back on.
That happened to alot of the ppl....for the new ESC, after calibrate, it will turn off by itself.
tried that but still no led at all.
makes all the beep beep when setting endpoints but no led must be dead led
Originally Posted by hotrod1933
help
gt2 pro (going from memory) and have got 508 loaded and card confirms this but no red blink ??
am i doing something wrong or is led just stuffed or is it hard to see underneath.
other car set the same is ok
can get away with for club stuff but maybe not for higher events.
After loading the software onto the ESC, you must TURN OFF everything (radio and esc) and turn back on, and do the calibration with radio, then turn everything off again...then turn back on.
That happened to alot of the ppl....for the new ESC, after calibrate, it will turn off by itself.
tried that but still no led at all.
makes all the beep beep when setting endpoints but no led must be dead led
#9734
Tech Elite
iTrader: (1)
Quote:
Originally Posted by hotrod1933
help
gt2 pro (going from memory) and have got 508 loaded and card confirms this but no red blink ??
am i doing something wrong or is led just stuffed or is it hard to see underneath.
other car set the same is ok
can get away with for club stuff but maybe not for higher events.
After loading the software onto the ESC, you must TURN OFF everything (radio and esc) and turn back on, and do the calibration with radio, then turn everything off again...then turn back on.
That happened to alot of the ppl....for the new ESC, after calibrate, it will turn off by itself.
tried that but still no led at all.
makes all the beep beep when setting endpoints but no led must be dead led
Originally Posted by hotrod1933
help
gt2 pro (going from memory) and have got 508 loaded and card confirms this but no red blink ??
am i doing something wrong or is led just stuffed or is it hard to see underneath.
other car set the same is ok
can get away with for club stuff but maybe not for higher events.
After loading the software onto the ESC, you must TURN OFF everything (radio and esc) and turn back on, and do the calibration with radio, then turn everything off again...then turn back on.
That happened to alot of the ppl....for the new ESC, after calibrate, it will turn off by itself.
tried that but still no led at all.
makes all the beep beep when setting endpoints but no led must be dead led