R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 05-17-2010, 07:48 PM   #4336
Super Moderator
 
charlie_b's Avatar
R/C Tech Elite Subscriber
 
Join Date: Aug 2001
Location: Anaheim
Posts: 9,594
Trader Rating: 1 (100%+)
Send a message via AIM to charlie_b Send a message via MSN to charlie_b Send a message via Yahoo to charlie_b
Default

Quote:
Originally Posted by mark williams View Post
Hi guys, I'm set to try the 422 software down my club on Friday with v3 10.5
the track has a 20m straight and i was hoping someone has tried it with success..what are the main settings to play with? I don't want it too punchy on the infield but would like to rip down the short straight

cheers mark
Mark, start with these settings for 10.5
4/8
9/8
12/6
13/3
14/2
15/3

If you are temping higher than 160*F, then lessen your #15 to 15/4. gearing will depend on your driving. With #15, higher parameters =less punch.
Good Luck.

After about 2 minutes, check your temps.
__________________
''Many of life's failures are people who did not realize how close they were to success when they gave up.''-- Thomas Alva Edison
CAL RACEWAY:CAL RACEWAY
GT10 SERIES:GT10 SERIES
CFX Paintworks:="https://www.facebook.com/CFXPaintworks?fref=ts
|HITEC|PARMA|PROTEKRC|SWEEP|IWATA|RPM|AMAIN|CREATE X/WICKED/AUTOAIR PAINTS|TEAMASSOCIATED|REEDY
charlie_b is offline   Reply With Quote
Old 05-17-2010, 07:50 PM   #4337
Super Moderator
 
charlie_b's Avatar
R/C Tech Elite Subscriber
 
Join Date: Aug 2001
Location: Anaheim
Posts: 9,594
Trader Rating: 1 (100%+)
Send a message via AIM to charlie_b Send a message via MSN to charlie_b Send a message via Yahoo to charlie_b
Default

Quote:
Originally Posted by syndr0me View Post
Are these available anywhere in the US?

http://www.speedpassion.net/en/productDetails.asp?p=103
Speedtech Rc and TQRCRACING has them or can get them. Email or give them a call and they can get it to you.
__________________
''Many of life's failures are people who did not realize how close they were to success when they gave up.''-- Thomas Alva Edison
CAL RACEWAY:CAL RACEWAY
GT10 SERIES:GT10 SERIES
CFX Paintworks:="https://www.facebook.com/CFXPaintworks?fref=ts
|HITEC|PARMA|PROTEKRC|SWEEP|IWATA|RPM|AMAIN|CREATE X/WICKED/AUTOAIR PAINTS|TEAMASSOCIATED|REEDY
charlie_b is offline   Reply With Quote
Old 05-17-2010, 09:34 PM   #4338
Tech Initiate
 
Join Date: Feb 2010
Posts: 41
Default

hai, can i used this firmware V1.05_100420.. to run 3t motor?? or this firmware only for stock motor??
wan161111 is offline   Reply With Quote
Old 05-17-2010, 09:38 PM   #4339
Super Moderator
 
charlie_b's Avatar
R/C Tech Elite Subscriber
 
Join Date: Aug 2001
Location: Anaheim
Posts: 9,594
Trader Rating: 1 (100%+)
Send a message via AIM to charlie_b Send a message via MSN to charlie_b Send a message via Yahoo to charlie_b
Default

Quote:
Originally Posted by wan161111 View Post
hai, can i used this firmware V1.05_100420.. to run 3t motor?? or this firmware only for stock motor??
The V1.05_100420 has 3 software installed in it.
09205_MOD-for mod motors
100422_Stock for Stock Motors
100508_Stock Zero for Zero Timing as per Roar Rules.

To answer your question if you use the 09205_Mod software, you can use it with your 3T motor.

Yes, you can use the new firmware.
__________________
''Many of life's failures are people who did not realize how close they were to success when they gave up.''-- Thomas Alva Edison
CAL RACEWAY:CAL RACEWAY
GT10 SERIES:GT10 SERIES
CFX Paintworks:="https://www.facebook.com/CFXPaintworks?fref=ts
|HITEC|PARMA|PROTEKRC|SWEEP|IWATA|RPM|AMAIN|CREATE X/WICKED/AUTOAIR PAINTS|TEAMASSOCIATED|REEDY
charlie_b is offline   Reply With Quote
Old 05-17-2010, 09:57 PM   #4340
Tech Initiate
 
Join Date: Feb 2010
Posts: 41
Default

Quote:
Originally Posted by charlie_b View Post
The V1.05_100420 has 3 software installed in it.
09205_MOD-for mod motors
100422_Stock for Stock Motors
100508_Stock Zero for Zero Timing as per Roar Rules.

To answer your question if you use the 09205_Mod software, you can use it with your 3T motor.

Yes, you can use the new firmware.
oo, thanks
100422 has added some function. can i used boost n turbocharger with 3t motor
or i just can used 09205 firmware to run my 3t motor, without no turbocharger function..
some confuse hehe,
wan161111 is offline   Reply With Quote
Old 05-17-2010, 09:59 PM   #4341
Tech Elite
 
defcone's Avatar
 
Join Date: Feb 2009
Location: Sydney
Posts: 2,335
Trader Rating: 15 (100%+)
Default

Quote:
Originally Posted by wan161111 View Post
oo, thanks
100422 has added some function. can i used boost n turbocharger with 3t motor
or i just can used 09205 firmware to run my 3t motor, without no turbocharger function..
some confuse hehe,
Without the turbo charger.
defcone is offline   Reply With Quote
Old 05-17-2010, 10:07 PM   #4342
Tech Regular
 
Join Date: Jul 2007
Posts: 295
Trader Rating: 13 (100%+)
Default

Quote:
Originally Posted by charlie_b View Post
The V1.05_100420 has 3 software installed in it.
09205_MOD-for mod motors
100422_Stock for Stock Motors
100508_Stock Zero for Zero Timing as per Roar Rules.

To answer your question if you use the 09205_Mod software, you can use it with your 3T motor.

Yes, you can use the new firmware.
Just curious... wouldn't 422STOCK with all the timing features turned off be the same as 205MOD? If timing is turned off in 422, what's the difference in the two? Thanks...
g26er is offline   Reply With Quote
Old 05-17-2010, 10:10 PM   #4343
Tech Initiate
 
Join Date: Feb 2010
Posts: 41
Default

Quote:
Originally Posted by defcone View Post
Without the turbo charger.
thanks..
if i used 9.5t sensorless moto, can i used turbocharger.. or this firmware only for sensored stock motor
wan161111 is offline   Reply With Quote
Old 05-17-2010, 10:24 PM   #4344
Tech Champion
 
Solara's Avatar
 
Join Date: Sep 2002
Location: Chicago Illinois USA
Posts: 9,042
Trader Rating: 16 (100%+)
Send a message via ICQ to Solara Send a message via AIM to Solara
Default

Quote:
Originally Posted by g26er View Post
Just curious... wouldn't 422STOCK with all the timing features turned off be the same as 205MOD? If timing is turned off in 422, what's the difference in the two? Thanks...
Thats why Speed Passion only leave these 3 software for 3 specific motor spec....422 for stock type motor, 205 for mod type motor, and 510 for no timing SPEC type racing application.

You can always mix and match and try out all the software with all type of motor, however, you must be very knowledgable about speed control, along with motor tunning and the latest Supercharger/turbo feature in order for you to take full advantage of the software.

You can give the 422 a try by turning the item #12 off and see there are any different to the 205g without the supercharger.
__________________
SPEED PASSION - King Golden, Speed Passion USA, Speed Power, Hirosaka Pro Products, East Coast Bodies, Schumacher Racing, Hurricane Motorsports, Serpent America, Sweep Racing USA. http://www.spautomobile.com/en/index.asp (SPEED PASSION AUTOMOTIVE)
NEW Speed Power/Speed Passion direct sale site - http://shop.speedpowerrc.com/
Solara is offline   Reply With Quote
Old 05-17-2010, 10:27 PM   #4345
Tech Champion
 
Solara's Avatar
 
Join Date: Sep 2002
Location: Chicago Illinois USA
Posts: 9,042
Trader Rating: 16 (100%+)
Send a message via ICQ to Solara Send a message via AIM to Solara
Default

Quote:
Originally Posted by wan161111 View Post
thanks..
if i used 9.5t sensorless moto, can i used turbocharger.. or this firmware only for sensored stock motor
YES....you can use 9.5T motor with 422 software. HOWEVER, you must turn down the #9, #12 to #15 features in order to keep the 9.5T motor by blowing up.

I have not tried anything faster then 10.5 with 422 software, but if I am going to try it, I would do at least 1 setting lower from the 10.5 setup.

Speed Passion drivers from Europe has been testing the 422 software with 3.5-4T motor, however, we have yet to receive any recommanded setting for these motor use.

See Charlie-B 10.5 setup above and decrease a notch on 9, 12-15 items (don't forget to gear lower then 10.5)and temp motor every 5 laps or so.

Let us know your testing....good luck.
__________________
SPEED PASSION - King Golden, Speed Passion USA, Speed Power, Hirosaka Pro Products, East Coast Bodies, Schumacher Racing, Hurricane Motorsports, Serpent America, Sweep Racing USA. http://www.spautomobile.com/en/index.asp (SPEED PASSION AUTOMOTIVE)
NEW Speed Power/Speed Passion direct sale site - http://shop.speedpowerrc.com/
Solara is offline   Reply With Quote
Old 05-17-2010, 10:44 PM   #4346
Tech Initiate
 
Join Date: Feb 2010
Posts: 41
Default

Quote:
Originally Posted by Solara View Post
YES....you can use 9.5T motor with 422 software. HOWEVER, you must turn down the #9, #12 to #15 features in order to keep the 9.5T motor by blowing up.

I have not tried anything faster then 10.5 with 422 software, but if I am going to try it, I would do at least 1 setting lower from the 10.5 setup.

Speed Passion drivers from Europe has been testing the 422 software with 3.5-4T motor, however, we have yet to receive any recommanded setting for these motor use.

See Charlie-B 10.5 setup above and decrease a notch on 9, 12-15 items (don't forget to gear lower then 10.5)and temp motor every 5 laps or so.

Let us know your testing....good luck.
tq solara..
wan161111 is offline   Reply With Quote
Old 05-17-2010, 11:13 PM   #4347
Tech Master
 
KWT-NITRO's Avatar
R/C Tech Elite Subscriber
 
Join Date: Oct 2008
Location: Kuwait
Posts: 1,616
Trader Rating: 9 (100%+)
Default

Quote:
Originally Posted by Anemic_SluG View Post
Neutral range is the amount of "play" in the trigger. So the larger the number the more you have to pull the trigger to get the car to go forward or operate the brakes. It doesn't change the cars performance as much as the performance of your radio as a interface to the car. Check out the included picture for clarification.

-j
thanks for the great info and image, perfectly explained

cheers

Ali
__________________
Team Kuwait, Team Terribles, www.rccck.org
Kuwait National Champion
FEMCA Truggy Finalist & FEMCA Buggy Semi-Finalist
Thanks to all my sponsors: Modelix/Ultimate Racing, AKA Racing, AVID Racing, Stick-it1 Racing and HES
KWT-NITRO is offline   Reply With Quote
Old 05-18-2010, 12:12 AM   #4348
Super Moderator
 
Marcos.J's Avatar
R/C Tech Elite Subscriber
 
Join Date: Sep 2003
Location: Semper Fi
Posts: 25,177
Trader Rating: 140 (100%+)
Default

Quote:
Originally Posted by wan161111 View Post
thanks..
if i used 9.5t sensorless moto, can i used turbocharger.. or this firmware only for sensored stock motor
Im testing the 9.5 motor this weekend
Marcos.J is offline   Reply With Quote
Old 05-18-2010, 12:23 AM   #4349
Super Moderator
 
charlie_b's Avatar
R/C Tech Elite Subscriber
 
Join Date: Aug 2001
Location: Anaheim
Posts: 9,594
Trader Rating: 1 (100%+)
Send a message via AIM to charlie_b Send a message via MSN to charlie_b Send a message via Yahoo to charlie_b
Default

He is using sensorless motor guys, non of us tested this with a sensorless motor. I believe, but can not confirm, the software will not work with an unsensored motor. Please confirm someone?
__________________
''Many of life's failures are people who did not realize how close they were to success when they gave up.''-- Thomas Alva Edison
CAL RACEWAY:CAL RACEWAY
GT10 SERIES:GT10 SERIES
CFX Paintworks:="https://www.facebook.com/CFXPaintworks?fref=ts
|HITEC|PARMA|PROTEKRC|SWEEP|IWATA|RPM|AMAIN|CREATE X/WICKED/AUTOAIR PAINTS|TEAMASSOCIATED|REEDY
charlie_b is offline   Reply With Quote
Old 05-18-2010, 12:35 AM   #4350
Tech Elite
 
defcone's Avatar
 
Join Date: Feb 2009
Location: Sydney
Posts: 2,335
Trader Rating: 15 (100%+)
Default

Quote:
Originally Posted by charlie_b View Post
He is using sensorless motor guys, non of us tested this with a sensorless motor. I believe, but can not confirm, the software will not work with an unsensored motor. Please confirm someone?
I'm sure it'll work, it'll just be slow as.
defcone is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Speed Passion GT Competition Brushless ESC v2.0 Low Profile, LPF pink_sleeve Electric On-Road 13 07-08-2009 10:17 AM


Tags
gt2, lack of help, overpriced, poor customer service, reventon, reventon pro, speed passion


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 02:51 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0