R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 05-12-2010, 05:33 PM   #4261
Tech Champion
 
skypilot's Avatar
 
Join Date: Mar 2007
Posts: 9,491
Trader Rating: 14 (100%+)
Default

Quote:
Originally Posted by miku View Post
What settings and FDR were you running I am looking at a similar size track.

On a side note what are you outlining your track with?
side note:,, thats PVC pipe, think its 2 or 2 1/2 inch, its held together with cheap muffler pipe cut into 6 inch sections, at one end it is inserted in the pipe, a hole drilled and then riveted so it stays permenate, the other is inserted in the next pipe, a hole drilled a bolt dropped in so it doesn't come apart, (actually we have a "jig" one of the guys made for drilling the tube and pipe) the grey stuff in the corners is also pvc pipe, just a different type so they could bend it.

sorry for leaving out the good stuff, FDR was 6.14 or so, I had 5 degrees of timing on the motor, drrs set to max, amts set to 18.75 for the two heats and then changed to 22.5 for the 3rd heat. sc boost was #8 rpm delay was #2 throttle delay was #2 punch was #1 or #2,

I don't get to run 17.5 much so I'm still learning.

btw, I don't use a fan and temps were still good, it was a cool day, there was enough of a margin that even when the temp gets hot, the motor should still be fine. but as always, your results may vary
__________________
#49, #25a, #91, #7, #12 the ones to watch.... UPDATE. #12 is your new AMA GNC #1

A Northwest Team of Positive actions
skypilot is offline   Reply With Quote
Old 05-12-2010, 08:52 PM   #4262
Tech Fanatic
 
Join Date: Oct 2009
Posts: 835
Trader Rating: 8 (90%+)
Default

So we can use the standard settings box to get to the other settings for the 422? Can someone clarify...if so that would be sweeet!!!
__________________
Houston,Texas
Serpent 733 EVO
Mikes Hobby shop-Porter Texas/ Gulf coast Raceway"Electric Is For Hairdryers"..Eric Koger
Chris Totcky@facebook.com
Tha Skinny is offline   Reply With Quote
Old 05-12-2010, 09:05 PM   #4263
Tech Master
 
mr crum's Avatar
 
Join Date: May 2008
Location: tampa florida 813
Posts: 1,591
Trader Rating: 5 (100%+)
Send a message via Yahoo to mr crum
Default

Quote:
Originally Posted by Tha Skinny View Post
So we can use the standard settings box to get to the other settings for the 422? Can someone clarify...if so that would be sweeet!!!
once you upgrade lcd box you can use that i uesd it tonight
__________________
SPEED PASSION TEAM DRIVER
ADAB RACING FACTORY PILOT
WWW.ADRENALINERACEWAY.COM
FL INDOOR R/C COMPLEX
TEAM B.R. RACING
mr crum is offline   Reply With Quote
Old 05-12-2010, 09:14 PM   #4264
Tech Fanatic
 
Join Date: Oct 2009
Posts: 835
Trader Rating: 8 (90%+)
Default

Did you come up with anything special? What motor did you run?
__________________
Houston,Texas
Serpent 733 EVO
Mikes Hobby shop-Porter Texas/ Gulf coast Raceway"Electric Is For Hairdryers"..Eric Koger
Chris Totcky@facebook.com
Tha Skinny is offline   Reply With Quote
Old 05-12-2010, 09:26 PM   #4265
Tech Master
 
mr crum's Avatar
 
Join Date: May 2008
Location: tampa florida 813
Posts: 1,591
Trader Rating: 5 (100%+)
Send a message via Yahoo to mr crum
Default

Quote:
Originally Posted by Tha Skinny View Post
Did you come up with anything special? What motor did you run?
havent tested 1s doin it tomorow just loaded 422 on the speedo i run v3 sp 13.5 i will let you know what i find
__________________
SPEED PASSION TEAM DRIVER
ADAB RACING FACTORY PILOT
WWW.ADRENALINERACEWAY.COM
FL INDOOR R/C COMPLEX
TEAM B.R. RACING
mr crum is offline   Reply With Quote
Old 05-13-2010, 03:51 AM   #4266
Tech Adept
 
Join Date: Dec 2009
Location: southampton, UK
Posts: 145
Send a message via MSN to geubes
Default

Quote:
Originally Posted by skypilot View Post
sorry for leaving out the good stuff, FDR was 6.14 or so, I had 5 degrees of timing on the motor, drrs set to max, amts set to 18.75 for the two heats and then changed to 22.5 for the 3rd heat. sc boost was #8 rpm delay was #2 throttle delay was #2 punch was #1 or #2,

I don't get to run 17.5 much so I'm still learning.

btw, I don't use a fan and temps were still good, it was a cool day, there was enough of a margin that even when the temp gets hot, the motor should still be fine. but as always, your results may vary
Funny enough, Ive ran the 422 with a 17.5 Duo twice now and ended up with FDR of 6.16, ATMS set to 1 off max (which is 22.5 i think). DRRS on Max. Boost at 8, SC punch at 1. But my RPM was at 3000, and my throttle delay was slightly longer #5 0.4s.

its a good setting, quite, bordeline temps - 60-65C
geubes is offline   Reply With Quote
Old 05-13-2010, 03:54 AM   #4267
Super Moderator
 
charlie_b's Avatar
R/C Tech Elite Subscriber
 
Join Date: Aug 2001
Location: Anaheim
Posts: 9,594
Trader Rating: 1 (100%+)
Send a message via AIM to charlie_b Send a message via MSN to charlie_b Send a message via Yahoo to charlie_b
Default

Quote:
Originally Posted by geubes View Post
Funny enough, Ive ran the 422 with a 17.5 Duo twice now and ended up with FDR of 6.16, ATMS set to 1 off max (which is 22.5 i think). DRRS on Max. Boost at 8, SC punch at 1. But my RPM was at 3000, and my throttle delay was slightly longer #5 0.4s.

its a good setting, quite, bordeline temps - 60-65C
I honestly think after #12, it is all preference. A lot of drivers have found excellent results with numerous settings. I am just glad we can finally be competitive again. What a relief and a blessing.
__________________
''Many of life's failures are people who did not realize how close they were to success when they gave up.''-- Thomas Alva Edison
CAL RACEWAY:CAL RACEWAY
GT10 SERIES:GT10 SERIES
CFX Paintworks:="https://www.facebook.com/CFXPaintworks?fref=ts
|HITEC|PARMA|PROTEKRC|SWEEP|IWATA|RPM|AMAIN|CREATE X/WICKED/AUTOAIR PAINTS|TEAMASSOCIATED|REEDY
charlie_b is offline   Reply With Quote
Old 05-13-2010, 06:44 AM   #4268
Tech Fanatic
 
Join Date: Oct 2009
Posts: 835
Trader Rating: 8 (90%+)
Default

So I must not have been pushing mine at all the other night when I was using the X software! I was coming of at 110, that was max after 5 mintues. I was using a 5.37 fdr and a comp v3 17.5. Why are most using such high final drives. My track is only about 75x45 and guy's with tekins are running 5.4. about 5.9 I believe. If I am doing this wrong please tell me....LOL
__________________
Houston,Texas
Serpent 733 EVO
Mikes Hobby shop-Porter Texas/ Gulf coast Raceway"Electric Is For Hairdryers"..Eric Koger
Chris Totcky@facebook.com
Tha Skinny is offline   Reply With Quote
Old 05-13-2010, 06:52 AM   #4269
Super Moderator
 
charlie_b's Avatar
R/C Tech Elite Subscriber
 
Join Date: Aug 2001
Location: Anaheim
Posts: 9,594
Trader Rating: 1 (100%+)
Send a message via AIM to charlie_b Send a message via MSN to charlie_b Send a message via Yahoo to charlie_b
Default

Quote:
Originally Posted by Tha Skinny View Post
So I must not have been pushing mine at all the other night when I was using the X software! I was coming of at 110, that was max after 5 mintues. I was using a 5.37 fdr and a comp v3 17.5. Why are most using such high final drives. My track is only about 75x45 and guy's with tekins are running 5.4. about 5.9 I believe. If I am doing this wrong please tell me....LOL
No, you are geared right. Like i said, this software likes the lower FDR's.
__________________
''Many of life's failures are people who did not realize how close they were to success when they gave up.''-- Thomas Alva Edison
CAL RACEWAY:CAL RACEWAY
GT10 SERIES:GT10 SERIES
CFX Paintworks:="https://www.facebook.com/CFXPaintworks?fref=ts
|HITEC|PARMA|PROTEKRC|SWEEP|IWATA|RPM|AMAIN|CREATE X/WICKED/AUTOAIR PAINTS|TEAMASSOCIATED|REEDY
charlie_b is offline   Reply With Quote
Old 05-13-2010, 06:55 AM   #4270
Tech Fanatic
 
Join Date: Oct 2009
Posts: 835
Trader Rating: 8 (90%+)
Default

Sweet, so now just play with the other settings and go from there? I also am looking for a chart that may have all of the settings so I can have it in my pits or atleast the other settings that are not on the basic settings box.

is it still the same as this?

WARNING:
New Software packages posted here are BETA, and therefore not fully tested nor proven safe.
Please try new software only at your own risk.


Thanks!
Speed Passion Development Team

New settings added:
12.Supercharger Boost Level: Off Stage 1 Stage 2 Stage 3 Stage 4 Stage 5 Stage 6 Stage 7 Max
13. Supercharger RPM Delay: 4000 5000 6000 7000 8000 9000 10000 11000 12000
14. Supercharger Full Throttle Delay Off 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
15. Supercharger Punch: Motor Hot - Max -1 -2 -3 -4 -5 -6 -7 Motor Cooler - Low

Supercharger Boost Level: This sets the overall supercharger power level. High levels may increase speed, but always at the expense of motor heat.

Supercharger RPM Delay: This controls when the supercharger settings engage. When the motor RPM reaches this setting, the ESC will engage the supercharger.

Supercharger Full Throttle Delay: This setting delays the application of the supercharger function until after a set time has been reached while holding FULL Throttle.

Supercharger Punch: This setting controls timing advance at RPMs below the Start RPM setting. Lower settings decrease motor temps, and higher settings increase punch and motor temps.
__________________
Houston,Texas
Serpent 733 EVO
Mikes Hobby shop-Porter Texas/ Gulf coast Raceway"Electric Is For Hairdryers"..Eric Koger
Chris Totcky@facebook.com
Tha Skinny is offline   Reply With Quote
Old 05-13-2010, 07:02 AM   #4271
Tech Adept
 
altreyx's Avatar
 
Join Date: Jan 2009
Location: Milan, Italy
Posts: 139
Arrow Speed Passion Setup Sheet LQ

Hello guys with a little bit of delay i have changed the SP Esc setup sheet.
Now the dimensions are less Kb so will be possible upload and share (for who wants ) our setups directly on the forum.
Hoping you will like it,

Andrea
Attached Files
File Type: pdf Speedpassion Esc Setups Sheet LQ.pdf (447.9 KB, 140 views)
__________________
Yokomo BD7 - Yokomo R12C
Orca-Gm120
Reedy-Lrp
Helios EX10
altreyx is offline   Reply With Quote
Old 05-13-2010, 07:03 AM   #4272
Tech Elite
 
defcone's Avatar
 
Join Date: Feb 2009
Location: Sydney
Posts: 2,335
Trader Rating: 15 (100%+)
Default

Tha Skinny, pretty much.
defcone is offline   Reply With Quote
Old 05-13-2010, 07:40 AM   #4273
Tech Fanatic
 
Join Date: Oct 2009
Posts: 835
Trader Rating: 8 (90%+)
Default

Quote:
Originally Posted by altreyx View Post
Hello guys with a little bit of delay i have changed the SP Esc setup sheet.
Now the dimensions are less Kb so will be possible upload and share (for who wants ) our setups directly on the forum.
Hoping you will like it,

Andrea
all I get is script
__________________
Houston,Texas
Serpent 733 EVO
Mikes Hobby shop-Porter Texas/ Gulf coast Raceway"Electric Is For Hairdryers"..Eric Koger
Chris Totcky@facebook.com
Tha Skinny is offline   Reply With Quote
Old 05-13-2010, 11:33 AM   #4274
Super Moderator
 
Marcos.J's Avatar
R/C Tech Elite Subscriber
 
Join Date: Sep 2003
Location: Semper Fi
Posts: 25,177
Trader Rating: 140 (100%+)
Default

here are my settings so far for 17.5 and 13.5. both are working very well and the motor comes of about 112 degrees.
Attached Files
File Type: pdf Marcos.J_ESC_Settings_1.pdf (137.4 KB, 167 views)
Marcos.J is offline   Reply With Quote
Old 05-13-2010, 11:38 AM   #4275
Tech Champion
 
Join Date: Jan 2004
Location: Rockville, MD
Posts: 5,058
Trader Rating: 4 (100%+)
Default

Quote:
Originally Posted by Marcos.J View Post
here are my settings so far for 17.5 and 13.5. both are working very well and the motor comes of about 112 degrees.
Didn't work.
__________________
Steve Walter
Sweep Racing USA/ Speed Passion USA/ Karens Famous Cookies (Transporter)
SRW141 is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Speed Passion GT Competition Brushless ESC v2.0 Low Profile, LPF pink_sleeve Electric On-Road 13 07-08-2009 10:17 AM


Tags
gt2, lack of help, overpriced, poor customer service, reventon, reventon pro, speed passion


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 06:56 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0