The Speed Passion Thread
#1578
Tech Master
Join Date: Sep 2007
Location: Oreganastan Pacific Wonderland home to Indoor Farming
Posts: 1,059
My Speed Passion 17.5 motor will be coming in the mail soon. I will be using it with a Novak Havoc ESC (i know... i do want the 2.0 LPF, but i really don't have 200$ to drop on an ESC right now..) in a TC4. Usually i use a Venom 5000 lipo. The internal drive on the TC4 is 2.5. Right now I'm using a 68t spur and a 35t pinion with the Havoc, for a FDR of about 4.8 I think. What do you all think would be a good FDR to start with? Thanks
Dan
Dan
anyway......run a few minuets and watch temps and LAP times, one may go up and the other down. Gear for lap times!
#1579
Adam- Are you guys taking fri off or will you be at the shop? I need a motor... so if nothing else you can send it my way monday... be a nice b-day present if i get it on wed...lol
17.5 and 13.5
Thanks,
-DC-
17.5 and 13.5
Thanks,
-DC-
#1580
Hi
Got the GT 2.0 Pro. And will be running eigther a LRP 9,5T motor or a Corally 5,5T. I'm running 2Cell Lipos.
What Start mode and timing would you suggest for the two motors?
Got the GT 2.0 Pro. And will be running eigther a LRP 9,5T motor or a Corally 5,5T. I'm running 2Cell Lipos.
What Start mode and timing would you suggest for the two motors?
#1581
Could someone tell me where i can download the latest software update? I cannot find it on speedpassion.net
#1583
Tech Regular
iTrader: (5)
If you go to the SP site, go to "accesories", Click on the LCD programmer. When the page comes up there will be buttons across the top. Click on "downloads". There will be a file for the new 1.32 program. If that's what you're looking for, that should do it.
Rob.....
#1584
Ah Ha! That much I know.
If you go to the SP site, go to "accesories", Click on the LCD programmer. When the page comes up there will be buttons across the top. Click on "downloads". There will be a file for the new 1.32 program. If that's what you're looking for, that should do it.
Rob.....
If you go to the SP site, go to "accesories", Click on the LCD programmer. When the page comes up there will be buttons across the top. Click on "downloads". There will be a file for the new 1.32 program. If that's what you're looking for, that should do it.
Rob.....
#1586
Tech Addict
The 107 feels faster (more push/aggresive), but the fastest laptimes as well as 5 min total came with the 110 version. It feels a bit softer than the 107 version, but is still fast. Improved personal best over 5 min with one lap (about 10 seconds) with the 110 software compared to recent personal best with the GM120 ESC/GM13.5T motor as well as 2 tenths on laptime, so the 110 it will be for the next race
Motor temp was about 55-57 degrees Celcius with 110 after 6 minutes. With the 107, the temp increased to 70 degrees celcius (about 170 F) after 6 minutes. FDR was 6.35 which is max allowed in our local winter champs.
Can imagine the 107 would be better on larger track. Will test 107 (or any replacement) later when the snow is gone and the outdoor season starts again in the spring...
...
#1587
Tech Regular
iTrader: (20)
Help me figure this out.
I downloaded the new software for my SP 2.0 LPF. I am running a 13.5 class at my local club. From what I have read the 110 is way to go? I am running a cyclone tc with a sp 13.5 first gen motor. Can some one me point if in a good set up for my esc, also what FDR should I start with. Remember my SP 13.5 is the first gen.
Second question I trying to set up my sons car to run VTA 21.5 on a HPI pro 4, Again same question as far a starting setting and FDR. Same ESC, hovever the motor is a Novak 21.5 ss.
Thanks
Second question I trying to set up my sons car to run VTA 21.5 on a HPI pro 4, Again same question as far a starting setting and FDR. Same ESC, hovever the motor is a Novak 21.5 ss.
Thanks
#1588
Tech Addict
iTrader: (29)
Hi all,
Can someone please tell me where i can get my hands on these 2 Speed Passion products and that actually have them in stock?
I need the new Speed Passion 98802prob GT-Pro Brushless ESC Version 2
and also a 138115v3 competition 3.0 Brushless 11.5 Motor.
I need these asap as i need to do some testing before TITC.
Regards
Ben
Can someone please tell me where i can get my hands on these 2 Speed Passion products and that actually have them in stock?
I need the new Speed Passion 98802prob GT-Pro Brushless ESC Version 2
and also a 138115v3 competition 3.0 Brushless 11.5 Motor.
I need these asap as i need to do some testing before TITC.
Regards
Ben
#1589
#1590
Hi all,
Can someone please tell me where i can get my hands on these 2 Speed Passion products and that actually have them in stock?
I need the new Speed Passion 98802prob GT-Pro Brushless ESC Version 2
and also a 138115v3 competition 3.0 Brushless 11.5 Motor.
I need these asap as i need to do some testing before TITC.
Regards
Ben
Can someone please tell me where i can get my hands on these 2 Speed Passion products and that actually have them in stock?
I need the new Speed Passion 98802prob GT-Pro Brushless ESC Version 2
and also a 138115v3 competition 3.0 Brushless 11.5 Motor.
I need these asap as i need to do some testing before TITC.
Regards
Ben
You can also try Tom @ FormulaRC - www.formularc.com.au
Can send overnight via Express Post.