R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 06-14-2012, 04:15 PM   #3586
Tech Elite
 
olhipster1's Avatar
 
Join Date: Dec 2004
Location: Asgard
Posts: 3,995
Trader Rating: 98 (100%+)
Send a message via Yahoo to olhipster1
Default

Quote:
Originally Posted by Luvs-cougars View Post
Thanks for the help guys, I now believe it's just 2 blue o-rings or the clear o-ring plus spacer. Think the 2 blues give longer use but with more drag (and less leakage) and the clear o-ring plus spacer gives less drag but less time before rebuilds.
When I was in a pinch and couldn't get the blue o-rings I used HPI red o-rings
they work fantastic and are quite inexpensive (like $3.00 for 8). The HPI out and inner diameter is slightly bigger than the Schui o-rings.

Tamiya are smaller, Top blues are smaller...X brand are way smaller...
Associated red o-rings may work but haven't sized them up.

I personally would not run the shock without the lower spacer, the spacer is working as a guide. Without it the shaft will sway allowing the piston to rub the inner shock cylinder.
Just my opinion of course. Run'em any way you want to build them.
__________________
everything is Cause and effect
every Action has a reaction.
"I drank too much wine - I must take a p!ss"
CAUSE and EFFECT
olhipster1 is offline   Reply With Quote
Old 06-14-2012, 04:26 PM   #3587
Tech Elite
 
FK05 lover's Avatar
R/C Tech Elite Subscriber
 
Join Date: Dec 2007
Location: somewhere in 1973
Posts: 2,994
Trader Rating: 147 (99%+)
Default

Quote:
Originally Posted by kp-61 View Post
just incase some are wondering how to mount a fan on our cars. I had the double sided tape for some time but does come off when i hit the wall







and my custom chassis protector... This was after few races with some mishaps along the way LOL

Nice car, check out the R1-Wurks fans, no need for tape, you can get them thru Stormer
FK05 lover is offline   Reply With Quote
Old 06-15-2012, 04:31 AM   #3588
Tech Rookie
 
Join Date: Feb 2011
Posts: 12
Default

Quote:
Originally Posted by olhipster1 View Post
When I was in a pinch and couldn't get the blue o-rings I used HPI red o-rings
they work fantastic and are quite inexpensive (like $3.00 for 8). The HPI out and inner diameter is slightly bigger than the Schui o-rings.

Tamiya are smaller, Top blues are smaller...X brand are way smaller...
Associated red o-rings may work but haven't sized them up.

I personally would not run the shock without the lower spacer, the spacer is working as a guide. Without it the shaft will sway allowing the piston to rub the inner shock cylinder.
Just my opinion of course. Run'em any way you want to build them.
I see what you mean about the piston rubbing the cylinder more, but wouldnt it sway and rub anyway even with the spacer as it's not a tight enough fit to keep the piston exactly true when shock is compressed. Not an expert on fluid dynamics but wouldn't there always be oil moving around the sides of the piston to keep it true?

Just built two shocks, one with 2 blues, one with 1 clear + spacer, doesn't seem any less sway at piston head with either option. piston still wobbles around and rubs inside of cylinder with either.
Luvs-cougars is offline   Reply With Quote
Old 06-15-2012, 07:49 AM   #3589
Tech Elite
 
olhipster1's Avatar
 
Join Date: Dec 2004
Location: Asgard
Posts: 3,995
Trader Rating: 98 (100%+)
Send a message via Yahoo to olhipster1
Default

Quote:
Originally Posted by Luvs-cougars View Post
I see what you mean about the piston rubbing the cylinder more, but wouldnt it sway and rub anyway even with the spacer as it's not a tight enough fit to keep the piston exactly true when shock is compressed. Not an expert on fluid dynamics but wouldn't there always be oil moving around the sides of the piston to keep it true?

Just built two shocks, one with 2 blues, one with 1 clear + spacer, doesn't seem any less sway at piston head with either option. piston still wobbles around and rubs inside of cylinder with either.
Shim the piston (under piston is best result) it will remove all piston movement.
makes a huge difference...you will be surprised.
I have to thank Mike Haynes for that tip.
__________________
everything is Cause and effect
every Action has a reaction.
"I drank too much wine - I must take a p!ss"
CAUSE and EFFECT
olhipster1 is offline   Reply With Quote
Old 06-15-2012, 08:31 AM   #3590
Tech Master
 
poochy's Avatar
 
Join Date: Apr 2007
Posts: 1,456
Trader Rating: 11 (100%+)
Default

Quote:
Originally Posted by Luvs-cougars View Post
I see what you mean about the piston rubbing the cylinder more, but wouldnt it sway and rub anyway even with the spacer as it's not a tight enough fit to keep the piston exactly true when shock is compressed. Not an expert on fluid dynamics but wouldn't there always be oil moving around the sides of the piston to keep it true?

Just built two shocks, one with 2 blues, one with 1 clear + spacer, doesn't seem any less sway at piston head with either option. piston still wobbles around and rubs inside of cylinder with either.
the spacer stops the two small blue o-rings from vertical play, try oring-spacer-oring-bush---what color is the spacer (black or white)?
poochy is offline   Reply With Quote
Old 06-15-2012, 09:04 AM   #3591
Tech Adept
 
kp-61's Avatar
 
Join Date: Oct 2005
Location: Toronto, Ontario
Posts: 211
Trader Rating: 10 (100%+)
Default

Thanks FK.. ordered some fans for backup!
__________________
* VISA * MASTER CARD :)
kp-61 is offline   Reply With Quote
Old 06-15-2012, 11:05 AM   #3592
Tech Rookie
 
Join Date: Feb 2011
Posts: 12
Default

Quote:
Originally Posted by poochy View Post
the spacer stops the two small blue o-rings from vertical play, try oring-spacer-oring-bush---what color is the spacer (black or white)?
It's a white spacer and I don't think there's enough room in the shock bottom for it plus 2 blue o-rings.
Luvs-cougars is offline   Reply With Quote
Old 06-15-2012, 09:29 PM   #3593
Tech Elite
 
olhipster1's Avatar
 
Join Date: Dec 2004
Location: Asgard
Posts: 3,995
Trader Rating: 98 (100%+)
Send a message via Yahoo to olhipster1
Default

Quote:
Originally Posted by Luvs-cougars View Post
It's a white spacer and I don't think there's enough room in the shock bottom for it plus 2 blue o-rings.
I tried building like that a few weeks ago
Does not work, not enough room.
If you can go to a LHS take the blues and measure to other stuff. If you're lucky you'll find a slightly larger diameter o-ring.

HPI was the best fit that I found but there may be others.

Mine never leak at this time.
__________________
everything is Cause and effect
every Action has a reaction.
"I drank too much wine - I must take a p!ss"
CAUSE and EFFECT
olhipster1 is offline   Reply With Quote
Old 06-16-2012, 09:43 AM   #3594
Tech Master
 
poochy's Avatar
 
Join Date: Apr 2007
Posts: 1,456
Trader Rating: 11 (100%+)
Default

Quote:
Originally Posted by Luvs-cougars View Post
It's a white spacer and I don't think there's enough room in the shock bottom for it plus 2 blue o-rings.
I thnk i used the cougar sv blck spacer......ill take it apart n let u knw for sure
poochy is offline   Reply With Quote
Old 06-16-2012, 02:45 PM   #3595
Tech Rookie
 
Join Date: Feb 2011
Posts: 12
Default

Just bought some shorty lipos from hk, mainly for my cougar but noticed some people are using them on a TC with esc mounted behind them opposite the motor. Is this possible on a cx? Just wondering about securing the battery, not sure if I want to start dremmeling the chassis. Has anyone done this yet?
I'm just using battery tape and the kit lipo retainer at the moment
Luvs-cougars is offline   Reply With Quote
Old 06-16-2012, 04:23 PM   #3596
Tech Master
 
poochy's Avatar
 
Join Date: Apr 2007
Posts: 1,456
Trader Rating: 11 (100%+)
Default

Quote:
Originally Posted by olhipster1 View Post
I tried building like that a few weeks ago
Does not work, not enough room.
If you can go to a LHS take the blues and measure to other stuff. If you're lucky you'll find a slightly larger diameter o-ring.

HPI was the best fit that I found but there may be others.

Mine never leak at this time.
Olhip, whn u tried the two o-rings, did u put oil in it and tried movng the shaft? Without oil it binds really bad so it appears it wont work...fill with oil thn test
poochy is offline   Reply With Quote
Old 06-16-2012, 09:55 PM   #3597
Tech Master
 
spu83's Avatar
 
Join Date: Nov 2010
Location: S FL
Posts: 1,592
Trader Rating: 2 (100%+)
Default Belt clearance

Just install the long top deck conversion and the front belt seems too close to the top deck. I check the front diff and get as much shims i can on the left side but still seems too close. Anybody run in the same problem or did I get the wrong front diff ?
Attached Thumbnails
Schumacher Mi4-photo.jpg   Schumacher Mi4-photo-1-.jpg  
spu83 is offline   Reply With Quote
Old 06-18-2012, 10:57 AM   #3598
Tech Master
 
Join Date: Aug 2001
Location: England
Posts: 1,467
Send a message via ICQ to MattW
Default

The main issue there is that the spec - R gear diff isn't designed to fit the front of the Mi4, only the rear. It does "kind of" fit, but as you can see from your picture this causes the belt to run on an angle across the chassis.
MattW is offline   Reply With Quote
Old 06-19-2012, 06:48 AM   #3599
Tech Master
 
spu83's Avatar
 
Join Date: Nov 2010
Location: S FL
Posts: 1,592
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by MattW View Post
The main issue there is that the spec - R gear diff isn't designed to fit the front of the Mi4, only the rear. It does "kind of" fit, but as you can see from your picture this causes the belt to run on an angle across the chassis.
Thanks swap back front spool problem solved.
spu83 is offline   Reply With Quote
Old 07-01-2012, 02:13 AM   #3600
Tech Addict
 
Mr RC Centre's Avatar
 
Join Date: Oct 2007
Posts: 731
Trader Rating: 5 (100%+)
Default

Question.

What effects does the twin point steering have over the single point?

http://www.racing-cars.com/pp/New_Ca...CXL/U3774.html
__________________
TLR - Spektrum - Proline - Muchmore
Mr RC Centre is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hot Bodies Cyclone Frank McKinney Electric On-Road 19762 07-26-2017 10:42 PM
Schumacher Corner meche Electric On-Road 27727 07-20-2015 07:38 PM
2009 SEQ Onroad Interclub LOSI123 Australian Racing 348 01-06-2010 10:08 AM
Racecraft TC Challange 2 Kylelim Singapore R/C Racers 82 08-01-2009 12:07 AM
Schumacher Mi3/3.5 parts and roller!!! Eastcoast13.5 R/C Items: For Sale/Trade 21 07-19-2009 01:15 PM
Opinions on TC's hippie Electric On-Road 58 07-08-2009 10:14 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 04:50 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net