R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   MIP cvd's (https://www.rctech.net/forum/electric-road/286819-mip-cvds.html)

airwoods 04-01-2009 03:54 PM

MIP cvd's
 
Just got 2 sets of hot bodies MIP cvd's.Do these just need to be used in the front or both front and back.What difference will they make for my cyclone s handling compared to the stock dog bones.I'm hoping some of the front wheel chatter at full steering will go away.Thanks

SammyZ 04-01-2009 05:36 PM

the cyclone series uses the same bone and axle front to rear so all parts are interchangeable (good design).

Try asking questions in the cyclone thread, lots of helpful info there:D

airwoods 04-01-2009 06:35 PM


Originally Posted by B18C Turbo (Post 5628799)
the cyclone series uses the same bone and axle front to rear so all parts are interchangeable (good design).

Try asking questions in the cyclone thread, lots of helpful info there:D

Thanks,ya i just noticed a cyclone s tub forum on this site and posted it there.I just installed them and still have front wheel chatter when steering.Is this a norm on most rc tourng?

or8ital 04-01-2009 06:53 PM


Originally Posted by airwoods (Post 5628399)
Just got 2 sets of hot bodies MIP cvd's.Do these just need to be used in the front or both front and back.What difference will they make for my cyclone s handling compared to the stock dog bones.I'm hoping some of the front wheel chatter at full steering will go away.Thanks

All CVDs chatter at full steering.


All times are GMT -7. It is currently 09:03 AM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.