T.O.P. Racing "Photon" 1/10 EP Touring Car
#7801
Tech Master
iTrader: (1)
I thought only the team guys had the prototype narrow chassis. I would have ordered one long ago, had I known.
I have an exotek on the way if the post office here ever ends their strike.
OD or EJ, if it's still possible to get the prototype chassis, could you let me know?
OD, I keep buying TOP parts locally for convenience, so I still haven't managed to get those low friction belts from my order back in January. If I can order the narrow chassis, can you include the belts? If I can't get the chassis, can you just send me the belts? I know it will probably be another 6 months or I'll end up forgetting about them entirely.
Thanks
I have an exotek on the way if the post office here ever ends their strike.
OD or EJ, if it's still possible to get the prototype chassis, could you let me know?
OD, I keep buying TOP parts locally for convenience, so I still haven't managed to get those low friction belts from my order back in January. If I can order the narrow chassis, can you include the belts? If I can't get the chassis, can you just send me the belts? I know it will probably be another 6 months or I'll end up forgetting about them entirely.
Thanks
#7802
Luppi, here you go:
http://www.rctech.net/forum/9254207-post7744.html
There's no part number since it's EJ's own design. Need to call or email TOP Racing USA.
http://www.rctech.net/forum/9254207-post7744.html
There's no part number since it's EJ's own design. Need to call or email TOP Racing USA.
#7803
I thought only the team guys had the prototype narrow chassis. I would have ordered one long ago, had I known.
I have an exotek on the way if the post office here ever ends their strike.
OD or EJ, if it's still possible to get the prototype chassis, could you let me know?
OD, I keep buying TOP parts locally for convenience, so I still haven't managed to get those low friction belts from my order back in January. If I can order the narrow chassis, can you include the belts? If I can't get the chassis, can you just send me the belts? I know it will probably be another 6 months or I'll end up forgetting about them entirely.
Thanks
I have an exotek on the way if the post office here ever ends their strike.
OD or EJ, if it's still possible to get the prototype chassis, could you let me know?
OD, I keep buying TOP parts locally for convenience, so I still haven't managed to get those low friction belts from my order back in January. If I can order the narrow chassis, can you include the belts? If I can't get the chassis, can you just send me the belts? I know it will probably be another 6 months or I'll end up forgetting about them entirely.
Thanks
Either way, no problem. Send us an email and I'll get right on it.
[email protected]
OD
#7805
Tech Addict
Are there plans for Equalized Corner Speed (ECS) Drive Shafts for the TOP from TOP?
#7807
R/C Tech Elite Member
iTrader: (28)
8.0 FDR. Should come off the track about 192 degrees. I've run upto a 7.2 FDR but the motor went up to 220 degrees. Using a 'high' FDR + more timing is probably the answer.
#7812
Just finished converting to a narrow chassis. Can't wait to try it.
#7813
R/C Tech Elite Member
iTrader: (28)
I just wanted to give a shout out to my homie Jerry Perez for his TQ (and fail) in 17.5T at the ROAR Region 2 Asphalt race this past weekend. Jerry's mechanical issues during the first lap (radio issues) caused an interesting result for the rest of the field. Also in the battle were local fast guys The Goat (4th), Arvin Nano (5th), and Rob Estep (7th) all running the Photon. Ralph Morella BQ'd the event and drove home to a convincing win, even recording a quicker fast lap then the A-main winnner (Cuffs).
In the 13.5T class I had an good battle with a few folks during the 6m after a bad first lap but battled back to nearly end up on the podium -- I think I needed another lap or two. Jerry also put his car into the show but again continued to experience radio drama, sorry buddy.
Finally, in Modified TC myself, Mark Unrath and Bill Dove all put our Photons into the A-main (ok, there was only one main but..). Thankfully I think I stumbled upon a setup during Sunday testing that might help yield a different result next time...
Unfortunately Larry couldn't make the race otherwise the top positions in many of these classes might of had another look. I guess we will just have to wait for the upcoming ROAR Asphalt Nats to see what the finals look like -- but I suspect we will see a few local Photons at the TOP.
You can read me at -
- http://www.redrc.net/2011/06/roar-re...ved-regionals/
- http://www.rctech.net/forum/racing-f...up-race-9.html
In the 13.5T class I had an good battle with a few folks during the 6m after a bad first lap but battled back to nearly end up on the podium -- I think I needed another lap or two. Jerry also put his car into the show but again continued to experience radio drama, sorry buddy.
Finally, in Modified TC myself, Mark Unrath and Bill Dove all put our Photons into the A-main (ok, there was only one main but..). Thankfully I think I stumbled upon a setup during Sunday testing that might help yield a different result next time...
Unfortunately Larry couldn't make the race otherwise the top positions in many of these classes might of had another look. I guess we will just have to wait for the upcoming ROAR Asphalt Nats to see what the finals look like -- but I suspect we will see a few local Photons at the TOP.
You can read me at -
- http://www.redrc.net/2011/06/roar-re...ved-regionals/
- http://www.rctech.net/forum/racing-f...up-race-9.html
#7815
Chad! I will be at TZ sat. Hope to see you there with your top! It will be my first time taking mine out since nats!!! time to blow off the dust and see if i can still drive