hanzo3

iTrader: (55)

Nice ordering site. Just like Amain. Is that case for the car the actual box?

Luppi Stefano

Hi Guys, I'm go back to Photon.
soon order new option to prepare for the 2011 season

OVA

iTrader: (86)

Where is EJ??
Does anybody know where can I find EJ setup for TZII high grip carpet...?

haywood

iTrader: (49)

Great new site! Just like A-Main!

haywood

iTrader: (49)

I am running the foam car and was wondering if the Xray 6 degree caster blocks would work on the Photon?

XRAY Composite Hard Foam-Spec C-Hub (Left 6°) (T2 008)
[XRA302376]

****Low*Price:*$7.79*

Luppi Stefano

Work very Well! but use front Knuckle arm XRAY, for perfect assembly

stiltskin

iTrader: (103)

The are very snug in the arm and need to be sanded to work properly. If you plan on using the photon steering block, you will need to put a shim between the block and the top of the c-hub. Don't forget to pick up the Xray bushings also. At $18 for the set, I think they're made of Platinum.

TeamWTF

iTrader: (11)

Hey guys

Can someone give e an explanation on the effects of moving the ackerman arm forward/back? I can see if would effect travel so lets assume i set the endpoints back to full lock...

Cheers
Phill

pakk

iTrader: (80)

I don't have a technical answer for you, but I can tell you what I noticed today when I play'd with it.

The further forward you go, the more steering you get. But it does become more difficult to drive. I was lacking some mid corner steering. EJ suggested I go up one(I had it all the way back). But I had a hard time getting used to it. I had to learn to be a lot more smooth with the wheel or else the back end would come out.

TeamWTF

iTrader: (11)

Ok thats good... I need more steering and have it all the way back...

Thanks

sosidge

I think the build manual suggests building it short - I can't imagine that you would get any steering on that setting! Run it on the middle setting with the 10 insert as a starting point, go smaller on the insert or longer on the crank if you need more aggressive steering than that.

Luppi Stefano

Middle crank: Standard
Rearward crank: increase steering in first part of Corner, more agility in Chicane
Forward crank: increase steering in fast Corner and out of curve, but is much less reactive in the chicane.
Insert:
10: standard position
9: reduces steering in input, steering increases in output corner
11: increase steering input corner
12: I have not tried it yet

MikeXray

iTrader: (73)

Anyone figure out a way to rig up a 5th body post up front?

Jamison R

iTrader: (66)

I have seen them mounted on top of the steering bellcrank with a long set screw.

gruman28

iTrader: (18)

Getting a photon from the wife for xmas. Getting rid of some of my xray parts. Wondering will xray shock springs fit on photon shocks? I have a ton of them and wondering if I should keep them.

Thanks
Chris