T.O.P. Racing "Photon" 1/10 EP Touring Car
#4276
Tech Master
iTrader: (17)
I have a very limited knowledge of this car. I'm picking up one for Reedy Race. I can think of Aluminum spool outdrives for running mod, I have only browsed this thread just a little, but any other items ill be needing? After much back and forth, and talks with various people, im happy to be picking up a photon. If you guys can link me to a good list of recommended parts that would be awesome.
-Mike
-Mike
#4277
I have a very limited knowledge of this car. I'm picking up one for Reedy Race. I can think of Aluminum spool outdrives for running mod, I have only browsed this thread just a little, but any other items ill be needing? After much back and forth, and talks with various people, im happy to be picking up a photon. If you guys can link me to a good list of recommended parts that would be awesome.
-Mike
-Mike
good luck
just buy the cefx upgrade now
#4278
Tech Master
iTrader: (17)
I'm not sold on the Cefx design. Or even the stock photon for that matter. But hey, I need a car for Reedy and beyond, until something spectacular that I gotta have comes out, i'm running a Photon. With all the little problems with the T3, the Photon is not looking that bad for the price.
#4279
Tech Champion
iTrader: (103)
I'm not sold on the Cefx design. Or even the stock photon for that matter. But hey, I need a car for Reedy and beyond, until something spectacular that I gotta have comes out, i'm running a Photon. With all the little problems with the T3, the Photon is not looking that bad for the price.
#4280
Tech Master
iTrader: (17)
Axle pin covers are very nice. Not required but they free up the CVDs and make maintenance easier. King headz makes an aluminum bellcrank that I could recommend. The aluminum knuckles are nice but the stock ones hold up pretty well. The kits come with steel spool outdrives. They are plenty strong for mod and don't require the plastic blades. The aluminum outdrives do require the blades. Pick up a couple bags of the blades with your order. Other than that just enjoy the car.
Thank You.
#4281
Tech Master
iTrader: (63)
I have a very limited knowledge of this car. I'm picking up one for Reedy Race. I can think of Aluminum spool outdrives for running mod, I have only browsed this thread just a little, but any other items ill be needing? After much back and forth, and talks with various people, im happy to be picking up a photon. If you guys can link me to a good list of recommended parts that would be awesome.
-Mike
-Mike
#4282
Tech Elite
iTrader: (20)
Join Date: Sep 2001
Location: MEMBER OF THE "MWC" Mimi Wong Clan
Posts: 2,442
Trader Rating: 20 (100%+)
13.5 2nd qualifier Jackson Charity race.
Fast Guy Larry Fairtrace, taking back TQ!
http://www.youtube.com/watch?v=PLrGc...609ca3443d8bd1
Fast Guy Larry Fairtrace, taking back TQ!
http://www.youtube.com/watch?v=PLrGc...609ca3443d8bd1
#4283
13.5 2nd qualifier Jackson Charity race.
Fast Guy Larry Fairtrace, taking back TQ!
http://www.youtube.com/watch?v=PLrGc...609ca3443d8bd1
Fast Guy Larry Fairtrace, taking back TQ!
http://www.youtube.com/watch?v=PLrGc...609ca3443d8bd1
#4284
Tech Elite
iTrader: (20)
Join Date: Sep 2001
Location: MEMBER OF THE "MWC" Mimi Wong Clan
Posts: 2,442
Trader Rating: 20 (100%+)
cant miss it, it happened in front of pit lane!! sorry man!
#4285
#4286
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
#4288
#4290
rcmarket,
when will we have alu bell crank?
when will we have alu bell crank?