9LikesT.O.P. Racing "Photon" 1/10 EP Touring Car
08-25-2009, 10:19 AM
#2026
I ran the new TIR spool and driveshafts last weekend at the BRCA National and I found them very good quality and made the car very smooth.
I am loving this car at the moment I have only had the car for a month or two but am having some of my best results finishing 3rd at the BRCA Juniors and 8th at the lastest BRCA National.
So top job to all the guys
I am loving this car at the moment I have only had the car for a month or two but am having some of my best results finishing 3rd at the BRCA Juniors and 8th at the lastest BRCA National.
So top job to all the guys
08-25-2009, 08:35 PM
#2027
You ever gonna run that red thing any time soon???
08-25-2009, 10:06 PM
#2028
I ran the new TIR spool and driveshafts last weekend at the BRCA National and I found them very good quality and made the car very smooth.
I am loving this car at the moment I have only had the car for a month or two but am having some of my best results finishing 3rd at the BRCA Juniors and 8th at the lastest BRCA National.
So top job to all the guys
I am loving this car at the moment I have only had the car for a month or two but am having some of my best results finishing 3rd at the BRCA Juniors and 8th at the lastest BRCA National.
So top job to all the guys
I did the same ting..but i uesd the TFK05 rear Diff ..two diff half together with no diff ring...works great...
08-26-2009, 02:14 PM
#2030
08-27-2009, 12:47 AM
#2032
Hey guys,
Has anyone played around with Chassis flex much?... Josh you might be able to shed some light on this.
I've run the medium rubber wings so far, and preferred them over standard, but i'm curious as to what people have found in running the wings as opposed to the medium upper deck etc.
Is it better, or more noticeable running a stiffer top deck compared to different wings?... or do you prefer one over the other etc?
I am running Rubber/Asphalt by the way
Cheers
Robbie
Has anyone played around with Chassis flex much?... Josh you might be able to shed some light on this.
I've run the medium rubber wings so far, and preferred them over standard, but i'm curious as to what people have found in running the wings as opposed to the medium upper deck etc.
Is it better, or more noticeable running a stiffer top deck compared to different wings?... or do you prefer one over the other etc?
I am running Rubber/Asphalt by the way
Cheers
Robbie
08-27-2009, 06:21 PM
#2033
08-27-2009, 07:17 PM
#2035
Just to inform ,that Team Roche hv launched a SPool for BD5 which fit TOP Photon as well....and Team Roche is working on the Red Anodize colour now....
pls visit here for the spool infos. KKEPRC
p/s: i been using this spool on my bd5 for 35 packs lipo with 8 min each run...11.5t motor... no sign of wear at all...im driving on technical track which require me to brake alots.
pls visit here for the spool infos. KKEPRC
p/s: i been using this spool on my bd5 for 35 packs lipo with 8 min each run...11.5t motor... no sign of wear at all...im driving on technical track which require me to brake alots.
08-28-2009, 09:21 AM
#2036
Tech Adept
Hello
What is the best chassis plat to run rubber tires with
lipo the 2.5 mm for 6-cell or the 2mm for lipo??
someone has tested both with lipo?
thanks in advance.
Best regards:
Pedro Silva
What is the best chassis plat to run rubber tires with
lipo the 2.5 mm for 6-cell or the 2mm for lipo??
someone has tested both with lipo?
thanks in advance.
Best regards:
Pedro Silva
08-28-2009, 08:19 PM
#2038
tally, I think the best strategy right now is to hold it together with wood screws, drop CA into the screw holes to tighten up the hole, drop CA onto the screw threads to further threadlock and tighten up the hole, then CA the outdrives into the spool. At least, that's where I'm at right now so I can continue driving.
08-29-2009, 02:58 AM
#2039
Anyone else having problems with the set screws coming out of the top of the rear hubs ? I am finding that the plastic that the hubs are made from is quite soft... going to have to glue them in I think.
This chassis is awesome - I wrung out another 2 laps
on our track last night. I am so much more consistent and accurate with the Photon over my old TRF415. It has held up to some pretty big 'offs' too.
Nice one T.O.P.
This chassis is awesome - I wrung out another 2 laps
on our track last night. I am so much more consistent and accurate with the Photon over my old TRF415. It has held up to some pretty big 'offs' too.Nice one T.O.P.
08-29-2009, 05:56 AM
#2040
I've not had any issues with the rear hubs stripping.
Maybe put a longer set screw in if you have any or just screw it further in and put a dab of thread lock on the top of the screw where the link goes on. If you decide to screw it further in.
hth
Luke
Maybe put a longer set screw in if you have any or just screw it further in and put a dab of thread lock on the top of the screw where the link goes on. If you decide to screw it further in.
hth
Luke